• 제목/요약/키워드: Parallel I/O

검색결과 214건 처리시간 0.03초

열화상 분석을 통한 바리스터의 직렬과 병렬 조합의 안전성 평가 (Stability Evaluation of Series and Parallel Varistor Combination Using Thermal Image Analysis)

  • 엄주홍;조성철;이태형;한후석
    • 조명전기설비학회논문지
    • /
    • 제20권8호
    • /
    • pp.22-29
    • /
    • 2006
  • IEC 규격을 기반으로 최근에 개정된 KS 규격에 따라 등전위 접지시스템이 중요하게 자리매김 하였으며, 전원시스템의 안정성을 위해 서지보호소자의 사용이 급격히 증가하고 있다. 내재된 비선형 저항성분으로 뛰어난 V-I 특성을 가지는 $Z_nO$ 바리스터는 서지전압을 제한하여 서지전류로 환류시키기 위해 전원용 보호기로 주로 사용되고 있다. 이러한 $Z_nO$ 바리스터는 교류 전원선에 접속하기 위해서 몇 가지 회로조합 형태로 구성되어 사용되는데, 사용자는 바리스터를 직렬 혹은 병렬로 조합하여 사용함에 있어서 안전에 직접적으로 관련된 기능이나 열적 안정성을 포함한 많은 것들을 고려하여야 한다. 본 논문에서는 40[kA]의 전류용량을 가지는 단일 바리스터 소자와 직렬 혹은 병렬 회로조합의 바리스터에 대하여 잔류전압, 방전전류, 누설전류, 표면온도를 측정하여 각각의 조합형태에 따라 안정성을 비교하였다.

선형 어레이 SliM-II 이미지 프로세서 칩 (A linear array SliM-II image processor chip)

  • 장현만;선우명훈
    • 전자공학회논문지C
    • /
    • 제35C권2호
    • /
    • pp.29-35
    • /
    • 1998
  • This paper describes architectures and design of a SIMD type parallel image processing chip called SliM-II. The chiphas a linear array of 64 processing elements (PEs), operates at 30 MHz in the worst case simulation and gives at least 1.92 GIPS. In contrast to existing array processors, such as IMAP, MGAP-2, VIP, etc., each PE has a multiplier that is quite effective for convolution, template matching, etc. The instruction set can execute an ALU operation, data I/O, and inter-PE communication simulataneously in a single instruction cycle. In addition, during the ALU/multiplier operation, SliM-II provides parallel move between the register file and on-chip memory as in DSP chips, SliM-II can greatly reduce the inter-PE communication overhead, due to the idea a sliding, which is a technique of overlapping inter-PE communication with computation. Moreover, the bandwidth of data I/O and inter-PE communication increases due to bit-parallel data paths. We used the COMPASS$^{TM}$ 3.3 V 0.6.$\mu$m standrd cell library (v8r4.10). The total number of transistors is about 1.5 muillions, the core size is 13.2 * 13.0 mm$^{2}$ and the package type is 208 pin PQ2 (Power Quad 2). The performance evaluation shows that, compared to a existing array processors, a proposed architeture gives a significant improvement for algorithms requiring multiplications.s.

  • PDF

병렬처리 대용량 공간자료구조의 연구 (A Study on Parallel Spatial Index Structure Development for Large Data)

  • 방갑산
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2007년도 춘계학술발표대회
    • /
    • pp.769-772
    • /
    • 2007
  • 공간 데이터의 효율적인 처리는 현대의 멀티미디어 데이터베이스에 있어서 대단히 중요한 역할을 하고 있다. 많은 응용분야에서 방대한 양의 공간 데이터는 보조기억장치(예: disk)에 저장이 되어 사용이 되고 공간 색인구조의 처리는 I/O에 대한 의존도가 크므로, I/O 연산의 병렬처리는 공간 색인구조의 질의반응시간을 현저하게 줄일 수 있다. 본 논문에서는 PR-tree라는 병렬형 공간 색인구조를 제안한다. PR-tree는 MXR-tree에 비해 높은 공간활용도와 빠른 처리시간을 보임으로써 공간 데이터베이스를 위한 효율적인 색인구조로 사용이 될 것으로 기대된다.

  • PDF

병렬처리 공간자료구조연구 (A Study on Parallel Spatial Index Structure)

  • 방갑산
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 추계학술발표대회
    • /
    • pp.775-776
    • /
    • 2009
  • 공간데이터를 관리하는 공간 index structure는 대부분 순차처리를 위한 구조를 가지고 있다. 많은 응용분야에서 방대한 양의 공간 데이터는 보조기억장치(예: disk)에 저장이 되어 사용이 되고 공간 index structure의 operation은 I/O에 대한 의존도가 크므로, I/O operation의 병렬처리는 공간 index structure의 질의반응시간을 현저하게 줄일 수 있다. 본 논문에서는 PPR-tree라는 병렬형 공간 index structure를 제안한다.

멀티큐 SSD를 위해 멀티코어 확장성을 제공하는 공정한 입출력 스케줄링 (Multi-core Scalable Fair I/O Scheduling for Multi-queue SSDs)

  • 조민정;강형석;김강희
    • 정보과학회 논문지
    • /
    • 제44권5호
    • /
    • pp.469-475
    • /
    • 2017
  • 최근에 제안된 NVMe 기반의 멀티큐 SSD는 여러 개의 코어들이 전담 큐들을 통해 병렬적으로 입출력을 수행함으로써 높은 SSD 대역폭을 제공한다. 이러한 멀티큐 SSD에 대해서 입출력 응용마다 대역폭 지분을 제공하기 위해서는 각 코어에게 대역폭 지분을 제공하는 것이 요구되며, 이를 위한 공정지분 스케줄링이 필요하다. 본 논문은 멀티큐 SSD를 위해 멀티코어 확장성을 제공하는 공정 큐잉 알고리즘을 제안한다. 제안하는 알고리즘은 무작위 선택 기법을 이용하여 코어간 동기화 오버헤드를 최소화하고 각 코어가 가중치에 비례하는 대역폭을 수신하도록 한다. 실험 결과, 제안하는 알고리즘은 block-mq를 사용하는 커널에서 정확한 대역폭 분할 효과를 보여주며, 코어 개수에 상관 없이 기존 FlashFQ 스케줄러보다 우수한 성능을 보여준다.

병렬 시스템 환경하에서 비정형 응용 프로그램을 위한 입출력 시스템의 설계 및 구현 (Design and Implementation of An I/O System for Irregular Application under Parallel System Environments)

  • 노재춘;박성순;알록샤우드리;권오영
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제26권11호
    • /
    • pp.1318-1332
    • /
    • 1999
  • 본 논문에서는 입출력 응용을 위해 collective I/O 기법을 기반으로 한 실행시간 시스템의 설계, 구현 그리고 그 성능평가를 기술한다. 여기서는 모든 프로세서가 동시에 I/O 요구에 따라 스케쥴링하며 I/O를 수행하는 collective I/O 방안과 프로세서들이 여러 그룹으로 묶이어, 다음 그룹이 데이터를 재배열하는 통신을 수행하는 동안 오직 한 그룹만이 동시에 I/O를 수행하는 pipelined collective I/O 등의 두 가지 설계방안을 살펴본다. Pipelined collective I/O의 전체 과정은 I/O 노드 충돌을 동적으로 줄이기 위해 파이프라인된다. 이상의 설계 부분에서는 동적으로 충돌 관리를 위한 지원을 제공한다. 본 논문에서는 다른 노드의 메모리 영역에 이미 존재하는 데이터를 재 사용하여 I/O 비용을 줄이기 위해 collective I/O 방안에서의 소프트웨어 캐슁 방안과 두 가지 모형에서의 chunking과 온라인 압축방안을 기술한다. 그리고 이상에서 기술한 방안들이 입출력을 위해 높은 성능을 보임을 기술하는데, 이 성능결과는 Intel Paragon과 ASCI/Red teraflops 기계 상에서 실험한 것이다. 그 결과 응용 레벨에서의 bandwidth는 peak point가 55%까지 측정되었다.Abstract In this paper we present the design, implementation and evaluation of a runtime system based on collective I/O techniques for irregular applications. We present two designs, namely, "Collective I/O" and "Pipelined Collective I/O". In the first scheme, all processors participate in the I/O simultaneously, making scheduling of I/O requests simpler but creating a possibility of contention at the I/O nodes. In the second approach, processors are grouped into several groups, so that only one group performs I/O simultaneously, while the next group performs communication to rearrange data, and this entire process is pipelined to reduce I/O node contention dynamically. In other words, the design provides support for dynamic contention management. Then we present a software caching method using collective I/O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performance for I/O above what has been possible so far. The performance results are presented on an Intel Paragon and on the ASCI/Red teraflops machine. Application level I/O bandwidth up to 55% of the peak is observed.he peak is observed.

Adaptive Techniques for Joint Optimization of XTC and DFE Loop Gain in High-Speed I/O

  • Oh, Taehyoun;Harjani, Ramesh
    • ETRI Journal
    • /
    • 제37권5호
    • /
    • pp.906-916
    • /
    • 2015
  • High-speed I/O channels require adaptive techniques to optimize the settings for filter tap weights at decision feedback equalization (DFE) read channels to compensate for channel inter-symbol interference (ISI) and crosstalk from multiple adjacent channels. Both ISI and crosstalk tend to vary with channel length, process, and temperature variations. Individually optimizing parameters such as those just mentioned leads to suboptimal solutions. We propose a joint optimization technique for crosstalk cancellation (XTC) at DFE to compensate for both ISI and XTC in high-speed I/O channels. The technique is used to compensate for between 15.7 dB and 19.7 dB of channel loss combined with a variety of crosstalk strengths from $60mV_{p-p}$ to $180mV_{p-p}$ adaptively, where the transmit non-return-to-zero signal amplitude is a constant $500mV_{p-p}$.

평행류와 Interdigitated 유로를 가진 교분자 전해질 연료전지(PEMFC)의 성능특성에 대한 수치해석 (Numerical Analysis on Performance Characteristics of PEMFC with Parallel and Interdigitated Flow Channel)

  • 이필형;조선아;최성훈;황상순
    • 전기화학회지
    • /
    • 제9권4호
    • /
    • pp.170-177
    • /
    • 2006
  • 고분자 전해질 연료전지의 분리판의 유동채널 설계는 고전류밀도에서 발생하는 농도분극에 직접적인 영향을 줄 뿐 아니라 생성되는 물의 효과적인 전달을 위하여 매우 중요하다. 평행류 유로와 interdigitated 유로의 성능비교를 위하여 연료극과 공기극이 포함된 완전한 형태의 고분자 전해질 연료전지의 3차원 수치해석모델을 개발하였다. 수치해석모델을 사용하여 평행류 유동장과 interdigitated 유동장의 압력강하, 채널간의 물질전달, $H_2O$$O_2$의 농도 분포 그리고 i-V 성능을 비교하였다. 그 결과 물질전달에서 채널간의 대류에 의한 물질전할이 더욱 우수한 interdigitated 유동채널에서 성능이 더 높게 나타났으며 압력강하는 보다 크게 나타나 설계시 두가지 성능에 대한 상호보완이 필요함을 알 수 있었다.

AN EXTENSION OF SCHNEIDER'S CHARACTERIZATION THEOREM FOR ELLIPSOIDS

  • Dong-Soo Kim;Young Ho Kim
    • 대한수학회보
    • /
    • 제60권4호
    • /
    • pp.905-913
    • /
    • 2023
  • Suppose that M is a strictly convex hypersurface in the (n + 1)-dimensional Euclidean space 𝔼n+1 with the origin o in its convex side and with the outward unit normal N. For a fixed point p ∈ M and a positive constant t, we put 𝚽t the hyperplane parallel to the tangent hyperplane 𝚽 at p and passing through the point q = p - tN(p). We consider the region cut from M by the parallel hyperplane 𝚽t, and denote by Ip(t) the (n + 1)-dimensional volume of the convex hull of the region and the origin o. Then Schneider's characterization theorem for ellipsoids states that among centrally symmetric, strictly convex and closed surfaces in the 3-dimensional Euclidean space 𝔼3, the ellipsoids are the only ones satisfying Ip(t) = 𝜙(p)t, where 𝜙 is a function defined on M. Recently, the characterization theorem was extended to centrally symmetric, strictly convex and closed hypersurfaces in 𝔼n+1 satisfying for a constant 𝛽, Ip(t) = 𝜙(p)t𝛽. In this paper, we study the volume Ip(t) of a strictly convex and complete hypersurface in 𝔼n+1 with the origin o in its convex side. As a result, first of all we extend the characterization theorem to strictly convex and closed (not necessarily centrally symmetric) hypersurfaces in 𝔼n+1 satisfying Ip(t) = 𝜙(p)t𝛽. After that we generalize the characterization theorem to strictly convex and complete (not necessarily closed) hypersurfaces in 𝔼n+1 satisfying Ip(t) = 𝜙(p)t𝛽.

A Nearly Optimal One-to-Many Routing Algorithm on k-ary n-cube Networks

  • Choi, Dongmin;Chung, Ilyong
    • 스마트미디어저널
    • /
    • 제7권2호
    • /
    • pp.9-14
    • /
    • 2018
  • The k-ary n-cube $Q^k_n$ is widely used in the design and implementation of parallel and distributed processing architectures. It consists of $k^n$ identical nodes, each node having degree 2n is connected through bidirectional, point-to-point communication channels to different neighbors. On $Q^k_n$ we would like to transmit packets from a source node to 2n destination nodes simultaneously along paths on this network, the $i^{th}$ packet will be transmitted along the $i^{th}$ path, where $0{\leq}i{\leq}2n-1$. In order for all packets to arrive at a destination node quickly and securely, we present an $O(n^3)$ routing algorithm on $Q^k_n$ for generating a set of one-to-many node-disjoint and nearly shortest paths, where each path is either shortest or nearly shortest and the total length of these paths is nearly minimum since the path is mainly determined by employing the Hungarian method.