• 제목/요약/키워드: Parallel Flow Type

검색결과 146건 처리시간 0.024초

A Study of the SPWM High-Frequency Harmonic Circulating Currents in Modular Inverters

  • Xu, Sheng;Ji, Zhendong
    • Journal of Power Electronics
    • /
    • 제16권6호
    • /
    • pp.2119-2128
    • /
    • 2016
  • Due to detection and control errors, some high-frequency harmonics with voltage-source characteristics cause circulating currents in modular inverters. Moreover, the circulating currents are usually affected by the output filters (OF) of each module due to their filter and resonance properties. The interaction among the circulating currents in the modules increase the power loss and reduce system stability and control precision. Therefore, this paper reports the results of a study on the SPWM high-frequency harmonics circulating currents for a double-module VSI. In the paper, an analysis of the circulating-current circuits is briefly described. Next, a mathematic model of the single-module output voltage based on the carrier frequency of SPWM is built. On this basis, through mathematic modeling of high-frequency harmonic circulating currents, the formation mechanism and distribution characteristics of circular currents and their influences are studied in detail. Finally, the influences of the OF on the circulating currents are studied by mainly taking an LC-type filter as an example. A theoretical analysis and experimental results demonstrate some important characteristics. First, the carrier phase shifting of the SPWM for each module is the major cause of the SPWM harmonic circulating currents, and the circulating currents are in an odd distribution around n-times the carrier frequency $n{\omega}_s$, where n = 1, 2, 3, ${\ldots}$. Second, the harmonic circular currents do not flow into the parallel system. Third, the OF can effectively suppress the non-circulating part of the high-frequency harmonic currents but is ineffective for the circulation part, and actually reduces system stability.

비선형 이동경화를 고려한 점소성 모델의 내연적 적분 (A Semi-Implicit Integration for Rate-Dependent Plasticity with Nonlinear Kinematic Hardening)

  • 윤삼손;이순복
    • 대한기계학회논문집A
    • /
    • 제27권9호
    • /
    • pp.1562-1570
    • /
    • 2003
  • The prediction of the inelastic behavior of the structure is an essential part of reliability assessment procedure, because most of the failures are induced by the inelastic deformation, such as creep and plastic deformation. During decades, there has been much progress in understanding of the inelastic behavior of the materials and a lot of inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. The radial return mapping is one of the most robust integration scheme currently used. Nonlinear kinematic hardening model of Armstrong-Fredrick type has recovery term and the direction of kinematic hardening increment is not parallel to that of plastic strain increment. In this case, The conventional radial return mapping method cannot be applied directly. In this investigation, we expanded the radial return mapping method to consider the nonlinear kinematic hardening model and implemented this integration scheme into ABAQUS by means of UMAT subroutine. The solution of the non-linear system of algebraic equations arising from time discretization with the generalized midpoint rule is determined using Newton method and bisection method. Using dynamic yield condition derived from linearization of flow rule, the integration scheme for elastoplastic and viscoplastic constitutive model was unified. Several numerical examples are considered to demonstrate the efficiency and applicability of the present method.

최소 침습 기법 슬개건 부하 분산 봉합술과 유관 나사못을 이용한 슬개골 횡골절의 치료 (Treatment of Transverse Patella Fracture with Minimally Invasive Load-Sharing Patellar Tendon Suture and Cannulated Screws)

  • 이범석;박병문;양봉석;김규완
    • 대한정형외과학회지
    • /
    • 제56권6호
    • /
    • pp.540-545
    • /
    • 2021
  • 슬개골 횡골절은 수술이 필요한 전위된 슬개골 골절의 가장 흔한 형태이다. 이러한 슬개골 횡골절은 골절선을 지나 평행하게 삽입된 Kirschner-강선이나 나사못에 장력대 강선을 추가적으로 고정한 기법이 흔히 사용된다. 그러나 고식적인 고정 방법의 경우 삽입된 강선이나 핀의 돌출에 의한 합병증이 흔히 발생한다. 이러한 합병증은 내고정물의 제거를 위한 추가적인 수술을 필요로 하고, 의료비 상승 및 슬관절의 기능 제한을 일으킬 수 있다. 이에 슬개골 횡골절에 대해 안정적인 고정력을 제공하고 수술 시 연부조직 손상을 최소화하여 골절부 혈류를 보존하고 수술 후 통증을 감소시키며, 내고정물에 의한 자극과 그에 따른 통증을 감소시켜 관절 운동 제한 발생 위험을 감소 시키는 최소 침습 부하 분산 경피적 슬개건 봉합술을 이용하여 치료한 사례들을 수술 술기와 함께 보고하고자 한다.

Study on shear fracture behavior of soft filling in concrete specimens: Experimental tests and numerical simulation

  • Lei, Zhou;Vahab, Sarfarazi;Hadi, Haeri;Amir Aslan, Naderi;Mohammad Fatehi, Marji;Fei, Wu
    • Structural Engineering and Mechanics
    • /
    • 제85권3호
    • /
    • pp.337-351
    • /
    • 2023
  • In this paper, the shear behavior of soft filling in rectangular-hollow concrete specimens was simulated using the 2D particle flow code (PFC2D). The laboratory-measured properties were used to calibrate some PFC2D micro-properties for modeling the behavior of geo-materials. The dimensions of prepared and modeled samples were 100 mm×100 mm. Some disc type narrow bands were removed from the central part of the model and different lengths of bridge areas (i.e., the distance between internal tips of two joints) with lengths of 30 mm, 50 mm, and 70 mm were produced. Then, the middle of the rectangular hollow was filled with cement material. Three filling sizes with dimensions of 5 mm×5 mm, 10 mm×5 mm, and 15 mm×5 mm were provided for different modeled samples. The parallel bond model was used to calibrate and re-produce these modeled specimens. Therefore, totally, 9 different types of samples were designed for the shear tests in PFC2D. The shear load was gradually applied to the model under a constant loading condition of 3 MPa (σc/3). The loading was continued till shear failure occur in the modeled concrete specimens. It has been shown that both tensile and shear cracks may occur in the fillings. The shear cracks mainly initiated from the crack (joint) tips and coalesced with another one. The shear displacements and shear strengths were both increased as the filling dimensions increased (for the case of a bridge area with a particular fixed length).

이단유로 축전식 탈염공정의 하수고도처리 적용가능성 평가 (Feasibility Study on Double Path Capacitive Deionization Process for Advanced Wastewater Treatment)

  • 차재환;신경숙;이정철;박승국;박남수;송의열
    • 대한환경공학회지
    • /
    • 제36권4호
    • /
    • pp.295-302
    • /
    • 2014
  • 본 연구는 물 재이용을 위한 하수고도처리공정으로서 이단유로 축전식 탈염공정의 적용 가능성을 평가하였다. 일반적으로 축전식 탈염장치는 전극이 병렬식으로 단순 적층되어 있는 반면에 이단유로 축전식 탈염장치는 분리판에 의해 모듈이 2개의 단으로 구분되어 1단과 2단이 수리학적 직렬연결이 되도록 고안되었다. 동일한 유입조건에서 전산유체역학 분석결과 이단유로 모듈이 단일유로 모듈에 비해 스페이서에서 보다 균등하고 빠른 유속분포를 보였고, 사영역도 상대적으로 작게 나타났다. 하지만 입구와 출구 간 압력강하는 단일유로 모듈이 0.4 bar인 반면 이단유로 모듈은 0.7 bar로 높게 나타났다. NaCl용액을 원수로 사용한 단위셀 테스트 결과, 단일유로와 이단유로의 최대 탈염효율은 유입유량 10 mL/min/cell pair에서 각각 88%, 91%이었다. 유량증가에 따른 단위셀 압력강하의 증가는 이단유로가 단일유로보다 높게 나타났으며, 유입유량 70 mL/min/cell pair에서 이단유로의 압력강하는 1.67 bar로 단일유로의 압력강하보다 2배 높게 나타났다. 이단유로의 압력강하를 완화시키기 위하여 전극 간 간격을 100에서 $200{\mu}m$으로 늘린 결과, 탈염효율은 유사하게 유지하면서 압력강하는 최대 0.87 bar로 낮게 유지할 수 있었다. Proto-type 축전식 탈염장치에 하수처리수를 주입하여 연속 운전한 결과, TDS 제거효율은 평균 78%로 나타났으며, 특정이온의 경우, $NH_4{^+}$-N, $NO_3{^-}$-N 및 $PO_4{^{3-}}$-P 제거효율이 각각 50%, 93% 및 50%로 나타나 질소제거 관점에서 CDI기술의 하수고도처리공정 활용가능성이 높을 것으로 판단된다.

운전조건에 따른 O3/UV, TiO2/UV 및 O3/TiO2/UV 시스템의 BTEX 증기처리에 관한 비교 연구 (A Comparative Study on Degradation of BTEX Vapor by O3/UV, TiO2/UV, and O3/TiO2/UV System with Operating Conditions)

  • 김경진;박옥현
    • 한국대기환경학회지
    • /
    • 제24권1호
    • /
    • pp.91-99
    • /
    • 2008
  • A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

북극 척치 해저평원의 해양지열관측 초기결과와 지각기원에 대한 의미 (Preliminary Results of Marine Heat Flow Measurements in the Chukchi Abyssal Plain, Arctic Ocean, and Constraints on Crustal Origin)

  • 김영균;홍종국;진영근;장민석;소병달
    • 지질공학
    • /
    • 제32권1호
    • /
    • pp.113-126
    • /
    • 2022
  • 북극해 아메라시아 분지(Amerasia Basin)에 속한 척치 해저평원(Chukchi Abyssal Plain)의 지구조 역사(tectonic history)는 혹독한 해빙 조건으로 인한 관측 부족으로 인하여 아직 밝혀지지 않았다. 지구조역사에 대한 여러 경쟁 가설들은 형성 시기로는 중생대에서 신생대까지, 지각 유형으로는 과도하게 확장된 대륙 지각에서 해양 지각까지, 형성 기작으로는 평행/부채꼴 균열에서 평행이동까지의 광범위한 범위를 갖는다. 2018년(ARA09C 항차)과 2021년(ARA12C 항차)에 쇄빙연구선 아라온을 이용해 해저평원의 수심 2,160~2,250 m 범위의 3개 정점에서 해양지각의 연령 결정에 필수적인 역할을 하는 해양지열의 관측이 이루어졌다. 해양지열 정점은 약 40 km에 걸쳐 확장축에 수직으로 위치한다. 퇴적물 코어 시료의 실험실 열전도도로부터 보정된 현장 열전도도를 사용하면, 관찰된 해양지열은 54~60 mW/m2 범위를 보인다. 해양지각을 가정할 때, 해양지열 관측결과는 형성 시기로서 후기 백악기(중생대)에 해당한다. 추정된 연대는 후기 중생대-신생대 동안 마카로프 분지가 열리면서 척치 해저평원 형성이 활성화되었다는 가설을 뒷받침한다. 이 시기는 동쪽으로 해저평원에 인접한 척치 보더랜드(Chukchi Border Land)의 열개 현상 발생과 동시대이다. 본 연구의 해양지열 관측결과로 퇴적물 내 가스하이드레이트 안정영역 하부(the base of the gas hydrate stability zone)의 위치가 추정되었고(332~367 mbsf), 이는 척치 고원(Chukchi Plateau)에서처럼 가스하이드레이트와 연관된 해저면 모사 반사면을 식별하는 데 도움이 될 것이다. 척치 해저평원의 정확한 형성 과정과 맨틀 열구조에 대한 이해를 높이기 위해 해양지열 관측을 포함한 추가적인 지구물리 탐사가 필요하다.

Ecological Functions and Losses of Traditional Korean Village Groves

  • Lee, D.-W.;Park, C.-R.
    • 한국제4기학회지
    • /
    • 제18권2호통권23호
    • /
    • pp.65-66
    • /
    • 2004
  • There have been groves, in many cases, along with hedgerows and remnant forests around a traditional Korean village. A village grove is very closely connected to the life of residents. Sometimes it was a holy place where important village festivals were held, and became a resting place for farmers, especially in sunny summer. As a matter of fact, it is noted that traditional Korean village groves had been fostered for many purpose as religion, Confucianism, scenery, sanitation, traffic guard, public security, agriculture, hunting, and military and public uses were included in Chosun Govemor General(1938). Village groves were usually located at the outlet of watershed inside which a village was built. In addition, village groves used to be established along part of mountain ranges, streams and streets. A unique type of village grove, called bibosoop was fostered especially where the outlet of watershed was largely opened. In other cases, it was placed where a part of mountain range was relatively low, or where village residents were likely to see ugly objects such as a huge cliff, stony upland with an unvegetated area and the like(Kim and Jang 1994). In a sense, a sheltebelt is a sort of bibosoop as it is a landscape element to complement places that are exposed to strong winds. However, it is comparable to other typical bibosoop that is situated at a topographically very specific zone of watershed. In this paper, we will address potential functions of Korean village groves from a perspective of modern landscape ecology and show current status of some remnants, based on preliminary surveys. A village grove functions as barrier or filter of objects such as water, nutrients, and other elements and habitat of wildlife (park et al. 2003, Lee 2004). The village grove slows down the flow of water and air, maintains soil moisture an hinders soil erosion, enabling cultivation of crops and bringing up creatures nearby. It contributes to enhancing biodiversity. Birds rest on shrubby and woody trees of the element. Presumably, other organisms may also inhabit the village groves and take advantage of it when those move from a forest patch to others. Emerging insects acclimate themselves in the shade of the green space before they fly to sunny air. Besides the village grove acts as a component of agroforestry system as leaf litter is shed from a grove to an asjacent agricultural area, and transformed into green manure(Lee 2004). By the way, many of the landscape elements were destroyed or declined in Koea during the past several decades. The losses have been parallel or linked to environmental degradation. Unfortunately, we have a little reliable data as for how many groves have disappeared in Korea until now. There has been no complete census on the village groves in Korea, and the viewpoints of survey were to a degree different depending on surveyors. So, it is difficult to analyze the temporal and spatial change of village groves. Currently, national inventory data of Korean village groves are available in three reports. We reviewed the locations of village groves and arranged those according to the present administrative units, DONG. With the limited data, we found that at least 484 of village groves were recorded in South Korea. Among all provinces, village groves were most in Gyeongsanbuk-Do Province and least in Chungcheongbuk-Do Province(Table 1). This is a preliminary report prepared while some quantitative data regarding functions and lossers of the village groves are being collected. More detailed data will be introduced in the near future.

  • PDF

가스 하이드레이트 부존층의 구조파악을 위한 탄성파 AVO 분석 AVO모델링, AVO역산 (Seismic AVO Analysis, AVO Modeling, AVO Inversion for understanding the gas-hydrate structure)

  • 김건득;정부흥
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.643-646
    • /
    • 2005
  • The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

  • PDF

태양광전원이 연계된 고압배전선로의 보호협조 평가 방안에 관한 연구 (Evaluation Method for Protection Coordination of PV Systems Interconnected with Primary Feeders)

  • 김병기;김소희;유경상;노대석
    • 한국융합학회논문지
    • /
    • 제2권4호
    • /
    • pp.29-37
    • /
    • 2011
  • 종래의 배전계통에 있어서의 전력조류는 변전소에서 선로말단을 향한 단 방향이었지만, 신에너지전원(분산전원)이 연계된 배전계통의 경우에는 그 출력용량의 여부에 따라 양방향의 전력조류가 발생할 가능성이 있어, 계통운용상 여러 가지의 문제점이 야기될 수 있다. 분산전원은 대규모전원의 보완적 역할과 배전선로 상의 국부적 부하 감당 역할을 부과하여 그의 적극적 활용을 꾀하기 위해서는, 분산전원으로부터 배전계통에 전력을 공급하는 역 조류의 기능을 허용할 수 있는 양방향 보호협조방식의 체제를 확립할 필요가 있다. 따라서 본 연구에서는 분산전원 연계에 따른 보호협조 기본 방안과 부하절체 운전에 따른 보호협조 방안, 변압기결선에 따른 보호협조 방안 등에 대한 알고리즘을 제시하였다. 또한, 이론적인 계산법(대칭좌표법)과 MATLAB/SIMULINK에 의하여 실 계통에서의 양방향 보호협조에 관련된 문제점을 분석하고, 해결방안을 제시하였다.