• 한국추진공학회지
• /
• 제13권5호
• /
• pp.48-56
• /
• 2009

고농도 과산화수소를 산화제로 이용하는 하이브리드 로켓의 자연 점화 연구를 수행하였다. 별도의 점화기 없이 촉매 반응을 통한 과산화수소 분해가스를 파라핀 및 폴리에틸렌에 분사함으로서 점화를 하였고 연속적인 재점화 및 즉각적인 점화 특성을 확인하였다. 안정적인 연소를 위해 파라핀은 PE에 비해 높은 연소실 특성길이가 요구된 반면, 펄스 응답특성은 점화지연 13 ms, 상승시간 30 ms 로서 폴리에틸렌의 응답성에 비해 두 배 가량 빠른 특성을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.552-561
• /
• 2006

The single droplet combustion characteristics of diesel fuel and low quality oil with additive oxygenate and paraffin under high ambient temperature and atmospheric pressure were investigated in the study. The results of the study may are concluded as follows: In the combustion of diesel fuel and low quality oil droplet with additive of oxygenate and paraffin. the dimensionless droplet size of $(D/Do)^2$ was linearly decreased with time. A fuel droplet with low boiling temperature additives and in high boiling temperature base fuel evaporates and burns faster than usual base fuel. Especially. these trends were remarkably obtained by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than n-paraffin agents. This rapid burning may result from so-called 'micro-explosion' and its burning intensity varies with the types of additives. The results above may suggest that rapid evaporation of oxygenate additive in the middle stage of combustion can contribute much to combustion improvement of blended fuels.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.49-56
• /
• 2006

The single droplet combustion characteristics of multicomponent fuel such as diesel-oxygenate and diesel-paraffin blends under high ambient temperature and atmospheric pressure were investigated in the study. The results of the study may be concluded as follows : In the combustion of diesel fuel droplet with additive of oxygenate and paraffin, the dimensionless droplet size of $(D/D_o)^2$ was linearly decreased with time. A fuel droplet with low boiling temperature additives and in high boiling temperature diesel fuel evaporates and burns faster than usual diesel fuel. This rapid burning may result from so-called "micro-explosion" and its burning intensity varies with the types of additives. The results above may suggest that rapid evaporation of oxygenate additive in the middle stage of combustion can contribute much to combustion improvement of blended fuels. When compared to ordinary diesel fuel, neat oxygenate and paraffin fuels show blue flame during entire combustion which prove smokeless combustion.

• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.10-16
• /
• 2000

Preliminary experiment was peformed to investigate the leaching characteristics of paraffin waste forms that had been recently generated in large quantities at domestic nuclear power plants. At first, waste simulants whose compositions were different in mixing ratio of paraffin to boric acid were prepared. Their compressive strengths were measured and ninety-day leaching test of specimen including cobalt was carried out according to ANSI/ANS-16.1 test procedure. Water immersion test was also conducted keeping pace with leaching test and the weight change and the compressive strength of specimen were observed after ninety days. The compressive strength of waste form exhibited 666 psi (4.53 MPa) in the case where mixing ratio of boric acid to paraffin was 78/22, which was adopted in concentrate waste drying system of domestic nuclear power plants. The leaching test resulted in about 50% of the cumulative fraction leached for boric acid and cobalt, respectively. The specific gravity of waste form was 0.87 ［g/g］whose value was less than that of water because the weight loss of about 39% occurred after the water immersion test of ninety days. It was also observed that the waste form which had undergone ninety-day water immersion test exhibited the compressive strength of 203 psi (1.38 MPa).

• 태양에너지
• /
• 제10권2호
• /
• pp.44-58
• /
• 1990

본 연구에서는 파라핀을 채운 수평 원관의 관벽을 가열하여 축열할 때에 관내에서 일어나는 열전달현상을 다루었다. 용융이 진행됨에 따라 고액 밀도차에 의해서 고상이 아래로 가라앉는 침강형을 대상으로 하여 고상 윗부분의 액상에서는 자연대류를 고려한 열전달모델을 세우고, 고상의 하부와 관벽 사이의 액막에서는 중력과 부력 그리고 액막 내의 압력에 의한 힘간의 평형관계를 이용하여 액막 내에서의 열전도모델을 세워 이를 수치모사하여 이론적으로 해석하였다. 그리고 실제 실험에 의하여 시간에 따른 용융형태를 사진으로 기록하여 이를 분석함으로써 용융량을 구하였고 유동장을 가시화하여 이론적 결과와 비교하였다. 실험에서 얻은 전체 용융량을 상부액상과 하부액막에서 녹은 양으로 구분하여 용융이 진행됨에 따른 각 부분에서의 용융속도 변화를 알아보았다.

• 대한화장품학회지
• /
• 제19권1호
• /
• pp.108-126
• /
• 1993

유화, 가용화, 겔화 등의 화장품 제형에서 폴리옥시에칠렌 토코페릴에테르의 기능에 대해 연구하였다. Liquid paraffin의 유화에 있어서 POE(10)TE는 O/W 유화에서 우수한 유화능을 나타내었다. W/o 및 O/W 유화에서 oil 과 polyol 류의 함량 증가가 점도에 미치는 영향에 대해서도 연구하였다. O/W 유화에서 점도는 liquid paraffin 약 70% 함량에서 급격히 증가하기 시작하였으며, propylene glycol 첨가시는 약간의 증가만 나타내었다. 그러나 W/O 유화에서 점도는 liquid paraffin의 함량 증가에 따라 감소하였고, propylene glycol함량 증가에 대해서도 감소하는 경향을 나타내었다. Perfume oil의 가용화에 있어서 POE(18)TE는 우수한 가용화능을 나타내었다. Poe(n)TE의 gelling effect는 폴리옥시에칠렌의 사슬의 증가에 따라 50 mol 까지는 상승하는 현상을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.45-48
• /
• 2001

SL(Stereolithogrphy) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect causes excessive surface roughness and requires additional postprocess finishing such as abrasive basting which is detrimental to part geometry and time consuming. Hence paraffin coating and grinding postprocess is proposed to raise the surface quality of SL part. The paraffin which has suitable properties for the proposed postprocess is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental result, It is verified as very practical for die casting with silicon rubber mold.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.923-928
• /
• 1986

본 논문에서는 열전도율이 큰 금속의 스크랩과 파라핀을 혼합한 축열 매질에 있어서 스크랩의 체적 혼합율에 따르는 열전도율의 변화를 모델링과 실험으로 구해서 축열 계산에 필요한 열전도율 자료를 제시하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• 제19권2호
• /
• pp.127-130
• /
• 2015

Direct injection of foreign material, such as liquid paraffin and silicone, into the breast can induce a foreign body granulomatous reaction and fibrosis, resulting in hard, nodular breast masses and architectural distortion that can mimic neoplasm. Conventional methods, including physical examination, mammography, and ultrasonography are of little use to differentiate between foreign body-induced mastopathy and breast cancer. In patients with foreign body injection such as breast augmentation, dynamic contrast enhanced MR imaging is an excellent imaging modality. Here, the authors report the MR imaging and pathological findings of ductal carcinoma in situ (DCIS) with multicystic changes in a 41-year-old woman with a previous history of interstitial mammoplasty by paraffin injection.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.