Auto-ignition Characteristics of Paraffin and PE Hybrid Rocket with $H_2O_2$ Catalytic Decomposition

과산화수소 촉매 분해를 이용한 파라핀 및 PE 하이브리드 로켓의 자연 점화 특성

  • 안성용 (한국과학기술원 항공우주공학과) ;
  • 진정근 (한국과학기술원 기계기술연구소) ;
  • 정은상 (한국과학기술원 항공우주공학과) ;
  • 권세진 (한국과학기술원 항공우주공학과)
  • Published : 2009.10.30

Abstract

The auto-ignition tests of hybrid rockets with the concentrated hydrogen peroxide as an oxidizer were presented. Auto-ignition was successfully demonstrated by injecting decomposed gases from $H_2O_2$ into paraffin or polyethylene fuels. In addition, restart and instant ignition were realized with this rocket. For stable combustion, a higher $L^*$ value was required for the paraffin combustion compared with PE. On the other hand, much faster response time was demonstrated in case of a paraffin, which was 13 and 30 ms at ignition delay and rise time respectively.

고농도 과산화수소를 산화제로 이용하는 하이브리드 로켓의 자연 점화 연구를 수행하였다. 별도의 점화기 없이 촉매 반응을 통한 과산화수소 분해가스를 파라핀 및 폴리에틸렌에 분사함으로서 점화를 하였고 연속적인 재점화 및 즉각적인 점화 특성을 확인하였다. 안정적인 연소를 위해 파라핀은 PE에 비해 높은 연소실 특성길이가 요구된 반면, 펄스 응답특성은 점화지연 13 ms, 상승시간 30 ms 로서 폴리에틸렌의 응답성에 비해 두 배 가량 빠른 특성을 보였다.

Keywords

References

  1. 유덕근, 김진곤, 길성만, 'Lab-scale 하이브리드 로켓 점화장치 개발,' 한국추진공학회 추계학술대회, 2003, pp.122-125
  2. 김권호, 박현춘, 백승욱, '파라핀 연료를 사용하는 소형 하이브리드 로켓의 연소 특성,' 한국추진공학회 추계학술대회, 2005, pp.261-264
  3. 안성용, 박대종, 양계병, 권세진, '무독성 추진제 촉매 분해를 이용한 항공기 비상동력장치 구동용 가스 발생기 개발,' 제6회 KAI 항공우주 논문상 수상논문집, 2008, pp.107-146
  4. 안성용, 박대종, 정승미, 권세진, '인젝터 방식 및 촉매 알갱이 크기에 따른 과산화수소 단일추진제 추력기의 응답 특성,' 한국추진공학회지, 제13권, 제1호, 2009, pp.19-26
  5. 임하영, 안성용, 권세진, '친환경추진제 '과산화수소'의 특성과 응용,' 한국추진공학회 춘계학술대회, 2006, pp.283-287
  6. Arif Karabeyoglu et al., 'Scale-Up Tests of High Regression Rate Paraffin-Based Hybrid Rocket Fuels,' Journal of propulsion and power, Vol. 20, No. 6, 2004, pp.1037-1045 https://doi.org/10.2514/1.3340
  7. Massimo Morbidelli et. al., Catalyst Design- Optimal Distribution of Catalyst in Pellets, Reactors, and Membranes, Cambridge University Press, 2001
  8. 안성용, 권세진, '활성물질에 따른 과산화수소 추력기의 응답 특성,' 한국추진공학회지, 제12권, 제5호, 2008, pp.26-34
  9. 안성용, 권세진, '액체추력기 촉매베드 크기 결정을 위한 실험적 방법,' 한국추진공학회지, 제12권, 제3호, 2008, pp.24-33
  10. Charles D. Brown, Elements of spacecraft design, 2002, AIAA