• 소성∙가공
• /
• 제13권8호
• /
• pp.723-730
• /
• 2004

This paper describes the analysis of extrusion process and integrity for a condenser tube which is a component of the heat exchanger in automobile and all conditioning apparatus. Recently, according to the development of analysis method using the computer, the numerical simulation have been applied to the 3-dimensional hot extrusion process with complex section area of the non-steady statement and then results of the analysis have been applied to optimal die design and process design. In this paper, firstly, the die design was performed for a condenser tube with a multi-hole section and the rigid-plasticity FE analysis performed of extrusion process. Secondly, we estimated metal flow of billet, extrusion load, welding pressure in chamber etc. and evaluated the pressure and elastic strain of the die land and mandrel tooth profile through a stress analysis of the die. Finally, the extrusion test was performed to estimate the validity of FE analysis. This paper confirmed that the designed extrusion die of the research is satisfactorily designed fur integrity of condenser tube.

• Geomechanics and Engineering
• /
• 제6권6호
• /
• pp.531-544
• /
• 2014

Studies of earthquakes over the last 50 years and the examination of dynamic soil behavior reveal that soil behavior is highly nonlinear and hysteretic even at small strains. Nonlinear behavior of soils during a seismic event has a predominant role in current site response analysis approaches. Common approaches to ground response analysis include linear, equivalent linear and nonlinear methods. These methods of ground response analysis may also be categorized into time domain and frequency domain concepts. Simplicity in developing analytical relations and accuracy in considering soils' dynamic properties dependency to loading frequency are benefits of frequency domain analysis. On the other hand, nonlinear methods are complicated and time consuming mainly because of their step by step integrations in time intervals. In part Ι of this paper, governing equations for seismic response analysis of surcharged and layered soils were developed using fundamental of wave propagation theory based on transfer function and boundary conditions. In this part, nonlinear seismic ground response is analyzed using extended HFTD method. The extended HFTD method benefits Newton-Raphson procedure which applies regular iterations and follows soils' fundamental stress-strain curve until convergence is achieved. The nonlinear HFTD approach developed here are applied to some examples presented in this part of the paper. Case studies are carried in which effects of some influencing parameters on the response are investigated. Results show that the current approach is sufficiently accurate, efficient, and fast converging. Discussions on the results obtained are presented throughout this part of the paper.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.212-218
• /
• 2022

In this paper, the necessity of AI video interview arises when conducting an interview for acquisition of excellent talent in a non-face-to-face situation due to similar situations such as Covid-19. As a matter to be supplemented in general AI interviews, it is difficult to evaluate the reliability and qualitative factors. In addition, the AI interview is conducted not in a two-way Q&A, rather in a one-sided Q&A process. This paper intends to fuse the advantages of existing AI interviews and video interviews. When conducting an interview using AI image analysis technology, it supplements subjective information that evaluates interview management and provides quantitative analysis data and HR expert data. In this paper, image-based multi-modal AI image analysis technology, bioanalysis-based HR analysis technology, and web RTC-based P2P image communication technology are applied. The goal of applying this technology is to propose a method in which biological analysis results (gaze, posture, voice, gesture, landmark) and HR information (opinions or features based on user propensity) can be processed on a single screen to select the right person for the hire.

• 한국임상보건과학회지
• /
• 제2권2호
• /
• pp.126-132
• /
• 2014

Purpose. Because traditional statistics approach had limitations in learning future forecasting and major factors causing occupational injuries in each industry, this paper develops a model forecasting and evaluating occupational injury rate by using a system dynamics model through the analysis of the industry injury statistics and the project for industry injury prevention. Method. The model of this paper consists of 12 total models such as a model of employees, of industrial disaster victims, of injury rate, etc.; In the analysis of firm size, it is classified and developed according to 12 groups on the basis of the number of employees, and in the analysis of industrial classification, it is done according to 10 total business fields such as manufacturing business, construction one, etc. Results. This paper suggests the methodology which forecasts industry injury rate by business field and size on the basis of developed model, and evaluates an industry injury prevention project from various angles. Conclusions. This paper deduced problem through the analysis of an industry injury by business fields and a comparative analysis of foreign cases, and analyzed to affect industry injury prevention by industry. And it also analyzed actual condition of industry injury, and did a difference in the level of safety consciousness according to the general characteristics of workers and occupational safety and health education related characteristics. In result, this paper suggests that analyzing occupational injury related factors, a safety budgetary allocation, and industry injury related factors can reduce illness costs such as employees' injury and medical care, and also assist cost for a disability.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.27-34
• /
• 2013

Quantitative analysis of 5-hydroxymethylfufural (5-HMF) conversion from fructose by dehydration and rearrangement was investigated by $^1H$-NMR spectroscopic method. Fructose was converted to 5-HMF in dimethylsulfoxide (DMSO)-$d^6$ or acidic deuterium hydroxide at controlled reaction temperature and time. With addition of internal standards (biphenyl for DMSO-$d^6$ solvent, and 2,5-dihydroxybenzoic acid for deuterium oxide solvent), conversion from fructose to 5-HMF was analyzed by $^1H$-NMR spectroscopy. Quantitative analysis was run by comparison with peak area integration between of 5-HMF and internal standard. In DMSO solvent, 5-HMF was stable end product but part of 5-HMF was converted to formic and levulinic acid at acidic aqueous medium.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1204-1209
• /
• 1990

This paper offers the theory and method for regression analysis of the regression model with operational parameter variables based on the fundamentals of mathematical statistics. Regression coefficients are usually constants related to the problem of regression analysis. This paper considers that regression coefficients are not constants but the functions of some operational parameter variables. This is a kind of method of two-step fitting regression model. The second part of this paper considers the experimental step numbers as recursive variables, the recursive identification with unknown operational parameter variables, which includes two recursive variables, is deduced. Then the optimization and the recursive identification are combined to obtain the sequential experiment optimum design with operational parameter variables. This paper also offers a fast recursive algorithm for a large number of sequential experiments.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.67-75
• /
• 1999

The new approach using the Peak Pattern Method was conducted for the analysis of polychlorinated biphenyls (PCBs) from the papers or paper products to provide certain hygienic data for the recycled papers as well as white papers. The height of the each peak, obtained from the PCBs standards, was transformed to the spectrum to compare with that of the samples. In addition to the results of the single PCBs standards, the pattern of mixed PCBs standards with the adequate concentration and ratios were obtained prior to the analysis of the paper samples. The test showed excellent repetition within 5% variation, and the recoveries of PCBs ranged from 92% to 97%. The PCBs, considered as a hazard material, were analyzed using the Peak Pattern Method from six different types of paper samples including the roll tissue. It could not find the same pattern of the PCBs peaks from all of the paper samples.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.188-192
• /
• 2007

This paper presents a current perspective on advanced fusion research trends in the construction industry as reflected in the proceedings of International Symposium on Automation and Robotics in Construction (ISARC) which has focused on advanced fusion technology in last decades. The paper reports the results of a 7-year analysis of papers between 2000 and 2006. The analysis focused on such data as research topics of the proceedings. The paper summarizes the data extracted from the paper and uses it to analyze advanced fusion research trends. The research result shows that the top research topics in advanced fusion research areas are construction robots and automation and intelligent construction management. The research also found that research related to advanced fusion technology is increasing throughout the world and topics are changing as current needs change.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2021

As drone technology advances, the cases of using drones in the construction industry are increasing rapidly. Research by the Ministry of Trade, Industry and Energy, has shown that drone use in the construction sector is expected to expand the fastest, and research has been carried out continuously to utilize drones in the construction industry. In this way, we will identify drone research trends in the construction industry as a basic data that will provide direction for future research. This paper collected papers for 10 years from 2011 to 2020 and keyword analysis through Gephi 0.9.2. This paper was classified by the study details of the paper with the upper keywords by year, through which it analyzed the changes in the direction of the study by field. The data in this paper is designed to contribute to the development of balanced drone utilization research, despite the limitations of 10-year statistics.

• Agribusiness and Information Management
• /
• 제6권2호
• /
• pp.40-48
• /
• 2014

As basic research to develop HEV and EV agricultural field machinery, the present study analyzes the technical trend of electric agricultural field machinery through product analysis, paper analysis, and patent analysis concerning HEV and EV in the automobile, construction machinery, and agricultural machinery sectors. For product analysis, the homepages of companies in these sectors were consulted to analyze the number of products of each company. For paper analysis, key words related to HEV and EV were selected, a search formula was drawn up, and articles search sites were consulted. And for patent analysis too, key words were selected and then a search formula was drawn up to examine published patent applications or registered patent applications, and trends were analyzed by structure, country, and year. The number of HEV and EV products were 17 in the automobile area, 8 in construction machinery, and 4 in agricultural machinery. Notably, in the agricultural machinery area, all HEV and EV products were from advanced companies overseas. In terms of papers, papers published in the past 5 years were searched and 33,195 papers were from the automobile area, 3,806 were from construction machinery, and 2,687, the fewest papers, were from the agricultural machinery area. A search of patents in the electric drive technology area in Korea, USA, and Japan, and Europe showed 1,927 valid patents, with 1,120 in Japan, 497 in USA, 193 in Korea, and 117 in Europe. Analysis of the trend of research on electric agricultural field machinery by product, paper, and patent shows the development of HEV and EV technology in Korea is insufficient compared to USA, Japan, and Europe, which means rapid technological development is needed.