• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.481-484
• /
• 2003

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators have significant advantages over porcelain and glass insulators. With the gradual improvement of their design and material, their reliability has also increased. It is however difficult to establish how they will perform after several years of service. Aging of the insulator weathershed may lead to damages such as excessive chalking and crazing, erosion and tracking which affect the insulator performance. In service insulator are subjected to aging stresses such as humidity, pollution and electrical field which act singly or in combination. There have been numerous accelerated laboratory tests developed with the intention of evaluating suitability of polymeric materials. Some of these are strictly material tests, where as, others evaluate full scale devices. Service experience plays a key role in the utility selection of polymer insulator, but is time consuming, and may not always be available. Hence there is a need for a meaningful and reliable accelerated aging test for polymer insulator. This paper describes multi-stress aging test for reliability of polymer insulator This paper presents the rule of multi-stress aging test and test chamber for polymer insulator in korea electrotechnology research institute.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.413-421
• /
• 2009

This paper investigates tensile characteristics of the stress aging heat-treated SM45C steel which are aging temperature at $250^{\circ}C$, $300^{\circ}C$, aging time at 1, 3 hours, and applied load at 300, 400N conditions by using acoustic emission. Most suitable aging condition was aging temperature $300^{\circ}C$, aging time 1 hour, and aging applied load 300N. And increased yield load 28.3% than non-treatment specimen in this condition. AE energy in elastic limit increased about 16.7 times than non-treatment specimen. When aging time is 3 hours, yield load decreased than other conditions that possibility is high to have itself defect on inside the specimen or coarse grain size precipitation is different in happened over-aging phenomenon. Especially, in case of $300^{\circ}C$, 3 hours and 400N condition appeared AE energy in elastic limit fairly high about 30 times than non-treatment specimen. This is considered by emit a lot of energies when material causes plastic deformation because the ductility increases on specimen by over-aging phenomenon.

• 센서학회지
• /
• 제26권4호
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.124-130
• /
• 2014

In highly reliable and durable systems, failures due to aging might result in catastrophes. Aging monitoring techniques to prevent catastrophes by predicting such a failure are required. This paper presents a scan-based on-line aging monitoring scheme which monitors aging during normal operation and gives an alarm if aging is detected so that the system users take action before a failure occurs. We illustrate our modified scan chain architecture and aging monitoring control method. Experimental results show our simulation results to verify the functions of the proposed scheme.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.50-57
• /
• 2012

In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.48-53
• /
• 2003

The objective of this study was to find in what color Korean handmade paper(Hanji) is dyed when it is dyed with a pigment extracted from waste onion peelings using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. 1. Korean handmade paper was dyed in different colors according to the kinds of mordant. Mainly it was dyed in orange-brown, and sometimes in gold or khaki. 2. Korean handmade paper dyed was not discolored much, which suggests that the pigment is strong under the condition of aging. 3. As for durability, Korean handmade paper dyed in gold was strongest. Korean handmade paper, to which aluminum sulfate, iron sulfate or sodium dichromate was applied as mordant, had poor durability. Thus, these were not suitable as mordant.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.23-28
• /
• 2006

Xylan in hemicellulose has been reported as one of the reasons of the yellowing of chemical pulp and paper. But little relevant information is available in literature. In this study, we examined into the influence that glucuronoxylan or glucomannan and metallic ion($Cu^{2+},\;Fe^{2+},\;Fe^{3+},\;Mn^{2+}$) residued in pulp get each or when mixed at yellowing. Filter paper was treated with each metallic ion, glucuronoxylan and the mixture of glucuronoxylan and metal ions, and brightness and CIE $L^*a^*b^*$ was measured after accelerated aging. As the results of measurements, the filter paper processed by 10% glucuronoxylan was dropped $2{\sim}3%$ on the brightness after accelerated aging for 24 hours. Also, the filter paper treated with glucuronoxylan and $Fe^{2+}$ was dropped 7% on the brightness.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.361-364
• /
• 2006

Generally, aging of paper is evaluated by folding endurance and degree of yellowing. It was known as that lignin, hemicellulose and metallic ion affect yellowing of mechanical or chemical pulps. Among these elements, especially, the study of hemicellulose that affect at yellowing of pulp is insufficient. In this study, we examined into the influence that glucuronoxylan or glucomannan and metallic ion($Cu^{2+},\;Fe^{2+},\;Fe^{3+},Mn^{2+}$) residued in pulp get each or when mixed at yellowing. Filter paper was treated with each metallic ion, glucuronoxylan and the mixture of glucuronoxylan and metal ions, and brightness and CIE $L^*a^*b^*$ was measured after accelerated aging. As the results of measurements, the filter paper processed by 10% glucuronoxylan was dropped 2-3% on the brightness after accelerated aging for 24 hours. Also, the filter paper treated with glucuronoxylan and $Fe^{2+}$ was dropped 7% on the brightness.

• East Asian Economic Review
• /
• 제25권4호
• /
• pp.361-401
• /
• 2021

This paper sets up a two agent small open economy with monopolistically competitive firms and catching up with the Joneses to investigate the labor and capital Laffer curve, taking into account aging population along the line of Auray et al. (2016), Galí and Monacelli (2005), and Trabandt and Uhlig (2011). The paper finds that the higher the market power of firms is, the larger the consumption inequality between asset holders and non-asset holders is in the economy with aging population. It also finds that there is room for government to increase the tax revenue by raising tax rates under the economy with higher markup, as households will work more hours to compensate for their loss of labor income to tax hikes. The expected maximum tax revenue is likely to shrink with progressive taxations, since non-asset holders with additional dividend income work less and consume more. The paper finds that the fiscal multiplier decreases with the degree of progressive redistribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.77-79
• /
• 2004

It is caused that insulation paper, which had got a lot of thermal stress by over-load after installation, should have been deteriorated in electrical and mechanical characteristics. Beside, insulation material is decreased the insulating property and accelerated aging of them in case of dielectric loss when transformers are manufactured with some moisture or transformers would have been them because of moisture-permeation. Therefore, in this study we experienced the influence of moisture content in case of the thermal aged insulation paper. we have measured tan 6 and breakdown voltage in the ratio of paper' moisture content before the aging and then taken the same tests again after insulation paper thermally accelerating-aged. There is a purpose to gain data for a life-design and to establish aging mechanism in order to continuously study life expectancy of the insulation paper