• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.777-784
• /
• 1997

This paper is fundamental study to develop ceiling materials, using the properties of Zeolite, stone dust and sludge for the purpose of prevention of environmental pollution and reuse of industrial wastes. According to latin square method, We estimated to the significant level ad optimum level for a significant factor, and investigated to the significant degree to extend each factor for required capacity. Thus, we investigated for required capacity in ceiling material such as, compressive and bending strength, absorptivity and thermal conductivity.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.481-486
• /
• 1998

This paper discussed about the effect of Zoogloea ramigera on the initial microorganism attachment and the biofilm growth. The additions of 5, 10 and 15%(w/w) of Zoogoea ramigera were facilitated for the initial attachment on the surface of the acryl disk. At biofilm growth, the more Zoogoea ramikera added to the activated sludge, the more biofilm dry weight was obtained. In order to get the stable blofllm and to mlnlmlze the start-up periods, Initial biofilm formation using activated sludge with floe forming microorganisms like Zoogloea ramigera was recommended rather than that without floe forming microorganisms.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.204-211
• /
• 2002

Combustion experiments are carried out to obtain the fundamental data for application of a internally circulating fluidized bed combustor to the combustion of paper sludge wastes. Experimental parameters are identified as secondary air ratio, sludge weight and water contents. The secondary air ratio was varied from 0 to 20% and water content was 14%, 25%, 35%, 45%, 62% and sludge weight was 30g, 60g, 90g. As a result, carbon conversion ratio was higher than injection of primary air. Emission of CO and NOx reduced with an increase of secondary air injection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2774-2779
• /
• 2010

In this paper, we develope the bucket driven dredger for sludge treatment in box type culvert. The dreadger is opererated in $2m\;{\times}\;2m$ box type narrow culvert under the road, and controlled using remote controller on the remote zone. In order to operate under dangerous environment, we develope the bucket drived dredger, and we will commercialize the result.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.557-565
• /
• 1991

The activated sludge process is a commonly used method for terating sewage and waste waters. The process is chatacterized by a lack of measurement instrumentations and control goals that are not always clear and not well understood. In such process, fuzzy control concept may be able to be adapted, do this paper presents a design method for fuzzy controller based on a selected sub-rule set from the total rule set and a multivariable fuzzy reasoning algorithms. In order to achievesystematic and efficient control of the activated sludge process under a great deal of disiutbances and a variety of perfotmance characteristics, a top-level rule-based fuzzy controller os proposed which provises lower-controllers with the suitable set-points according tothe onput-output states of the process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.75-79
• /
• 1995

The results of an experimental study on the manufacture and the mechanical properties of fiber reinforced calcium silicates-cement composites utilizing by products (fly ash or cement sludge) for construction materials are presented in this paper. As the test results show, compressive, tensile, and flexural strength, fracture toughness of fiber reinforced calcium silicates-cement composites were improved by increasing the fly ash and fiber contents, but were decreased by increasing cement sludge contents. Somehat, especially increasing fiber contents the fracture toughness of the composites were remarkably increased. Also, the mechanical properties of the composites reinforcing alkali-resistance GF were higher than those of the composites reinforcing Samoa Pulp.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.36-40
• /
• 2006

In order to prevent the environmental pollution, the dryers are commonly used to treat sludge that one of sewages is polluting the quality of water. Generally, the drying method is various as to the property of material and use. Rotary dryer is a good apparatus to treat them. It is the way that is to make substance transmission and heat using hot air between sludge particle and heated gas. In this paper, we developed a 3-pass rotary dryer for a design program for the 3-pass rotary dryer with various conditions. The working conditions of dryer are a raw sludge feed rate, input & output water content and operation time etc.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.93-99
• /
• 2014

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.2
• /
• pp.35-39
• /
• 2013

This paper synthesized the new copper removal agent(PW-2001) and investigated removal efficiency of copper, COD, calcium, SS and sludge amounts. Removal efficiency of copper were 96.1% and 99.1% with the lime and PW-2001, respectively while COD removals reached up to 38% and 69.6% with the use of lime and PW-2001. The concentrations of calcium and SS with PW-2001 were decreased 2.68 and 4.95 times lower than those with lime. Amount of sludge with PW-2001 was 60% smaller than lime. Quantity of PW-2001 needed for coagulation only reached 58.7, compared to lime standard quantity(100), and total cost of copper removal with PW-2001 was saved 25% more than lime.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.30-34
• /
• 2014

To apply paper mill sludges to soil as fertilizer, paper mill sludges were investigated to predict suitability and maleficence for soil. Newspaper and Printed Paper sludge were analyzed by IC (Ion Chromatography) and ICP-OES (Induced Coupled Plasma Optical Emission Spectrometer). As a results, harmful materials in two types of sludges were below standard by notified Ministy of Environment (ME). Also ionic substances causing the water pollution in sludges were less than the standard value by notified ME. Thus sludges from newspaper and printed paper is presumed that there are no water pollution and soil contamination.