• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.93-100
• /
• 2006

Post industrial technologies have improved human standard of living, however, a host of negative environmental consequences from the unlimited industrial appetite have posed serious global challenges. Remanufacturing is an industrial manufacturing process that is to restore old products to perform like a new and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. By extending product lift cycle, remanufacturing gives us enormous opportunities for sustainable development of our society. This paper introduces needs and current state of the art in the field of remanufacturing, also analyzes old products in terms of product variety and wear conditions with an example of automobile alternators. Then, a general and a product-specified remanufacturing process will be determined with them. Finally, this paper shows systemized guidelines for remanufacturing process of the specified parts. The results could be also used as a basic information for further remanufacturing applications.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.1-8
• /
• 2013

Remanufacturing of automobile parts is important for increasing the recycling resources. ECU(Electronic Control Unit) systems are becoming an increasingly important part of an automobile. But production company are reported in the ECU remanufacturing industry of domestic automobile parts due to a lack of remanufacturing technology and marketability. This paper introduces the ECU of remanufacturing, also grasps the structure and the analyzes failure cause that is external factors and fault in the characteristic design and steps in the Independent ECU remanufacturing process. The ECU manufacturing industry of the US was examined. The results in this paper could be used as the system information for further remanufacturing industry of domestic automobile parts.

• 한국경영과학회지
• /
• 제38권2호
• /
• pp.43-63
• /
• 2013

Remanufacturing is a process of recovering end-of-life products into serviceable parts for producing new products. Due to the limited supply of recovery cores to remanufacture, a remanufacturing firm also needs to produce or procure new parts for fulfilling the demand. This paper is targeted for solving the problem of determining the optimal amount of newly produced and remanufacturing parts, which is called production and remanufacturing planning (PRP) problem, under uncertain supply of recovery cores. The new production mitigates the risk of insufficient core supply while it takes more costs than the remanufacturing. The PRP model in this paper also considers disassemble-to-order (DTO) environment, in which multiple kinds of parts are remanufactured from multiple products on order of the parts. Whereas existing studies presents only heuristic solutions for DTO remanufacturing, this paper provides an exact solution for this problem and analytical sensitivity of the involved cost parameters, adopting multi-dimensional newsvendor modeling and stochastic linear programming techniques. The result shows that production and remanufacturing plans for multiple products are mutually dependent, and a change of cost parameters involved in only one part is propagated to all other parts.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.38-44
• /
• 2011

Remanufacturing is restoring or manufacturing the worn-out or discarded components of an end of life product in order to bring it to the "like new" condition. The aim is to reprocess used products in such a manner that the quality of the products is as good as or better than the new one, in terms of appearance, reliability and performance. This paper investigates the automotive remanufacturing industry in Europe. To further knowledge in this field, the paper focuses on the remanufacturing of the automotive components of end-of-life vehicles. The paper scope emphasizes key remanufacturing companies, which are identified and were surveyed in terms of their business structures. The research aims to address the potential for growth within the remanufacturing industry, with regard to various players. The state of the art in remanufacturing of automotive equipment will be identified.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.241-244
• /
• 2009

In this paper, it was performed to grasp the latest tendency of remanufacturing industry of domestic electronic components for development of remanufacturing technology and economical support of government. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for electronic components.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.269-273
• /
• 2010

Remanufacturing is an industrial manufacturing process. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.120-129
• /
• 2009

Remanufacturing is an industrial manufacturing process. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts. Also 5 essential tactics and 20 detail strategies are suggested. On the basis of the approach, the domestic remanufacturing industry will carry out the cooperation for their competitions.

• Industrial Engineering and Management Systems
• /
• 제14권2호
• /
• pp.159-174
• /
• 2015

Remanufacturing used, end-of-life products is a complex problem involving multiple types of products that may share common parts. Recovery targets assigned by market demand and environmental legislation add more difficulty to the problem. Manufacturers now need to achieve specified take-back and recovery rates while fulfilling demands for remanufactured products. To assists in the demand- and legislation-driven remanufacturing of a family of products (i.e., multiple products that share common parts), this paper introduces a bi-objective mixed integer linear programming (MILP) model for optimizing remanufacturing. The model identifies optimal remanufacturing plans for a product family, whereby, the remanufacturer can achieve demand and recovery targets more profitably and in an environmentally-friendly manner. The model can also be used to quantify and justify the economic and environmental benefits of a product family from a remanufacturing perspective. A case study is presented for remanufacturing an alternatorfamily of products.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.230-233
• /
• 2009

Remanufacturing is an industrial manufacturing process. The merits of manufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.78-85
• /
• 2010

The remanufacturing system is a series of industrial process in which worn-out products are restored to like-new condition. The remanufacturing system is differ from the repair system not only process characteristics but also product characteristics. So, it is required to design another model for the remanufacturing system which is distinct from the repair system and also performance index is required for the remanufacturing system. Therefore, in this paper we suggest the availability model for remanufacturing system by using Markov Process. This model represents each of the states of the remanufacturing system. Also performance indexes of remanufacturing system are introduced. Performance indexes are consisting of part reuse frequency and time, part disposal frequency and time. As a result, we can have a choice and control the proper part and offer useful information during the remanufacturing by using these availability model and performance indexes.