• 제목/요약/키워드: Paper Receipt

검색결과 91건 처리시간 0.024초

무선 다중 홉 환경을 위한 기여도 기반의 기회적 플러딩 기법 (Contribution-Level-Based Opportunistic Flooding for Wireless Multihop Networks)

  • 변승규;서형윤;김종덕
    • 정보과학회 논문지
    • /
    • 제42권6호
    • /
    • pp.791-800
    • /
    • 2015
  • 본 논문은 다중 홉 무선 네트워크 환경에서 브로드캐스트 전송 효율성 뿐 아니라 신뢰도도 우수한 기여도 기반 기회적 플러딩 기법을 제안한다. 브로드캐스트 트리를 전송 결과와 관련 없이 미리 결정하면, 무선 네트워크의 내재적 불안정성으로 지정된 릴레이 노드가 패킷을 수신하지 못할 수 있다. 본 논문에서 제안하는 기여도 기반 기회적 플러딩 기법은 릴레이 노드를 전송 결과를 기반으로 선택하는 기회적 전송의 개념을 사용하여 신뢰도를 제고하였다. 또한 전체 네트워크에 대한 단말 기여도에 따라 릴레이 우선 순위를 조정하여 불필요한 릴레이를 제거하고 전송 효율을 높였다. NS-3 시뮬레이터를 활용하여 제안 기법을 블라인드 플러딩, 그리고 도미넌트 프루닝과 비교하였다. 성능 분석 결과 제안 프로토콜은 블라인드 플러딩에 비해 릴레이 횟수에 기초한 효율 관점에서 35%, 도미넌트 프루닝에 비해 수신 노드 수에 기초한 신뢰도 관점에서 20~70% 수준의 성능 향상을 얻었다.

AWG 기반의 WDM-PON을 위한 MAC 칩 설계-II: MAC 프로토콜 (Design of MAC Chip for AWG-based WDM-PON-II: MAC Protocol)

  • 한경은;양원혁;김영천
    • 한국통신학회논문지
    • /
    • 제33권8B호
    • /
    • pp.646-656
    • /
    • 2008
  • 본 논문에서는 혼합형 2단 AWG 기반의 WDM-PON을 위한 MAC 칩을 설계하고 로직 시뮬레이션을 통하여 각 기능을 검증한다. 이 구조에서는 128개의 ONU와 1Gbps 용량의 32개 파장을 고려한다. 하향 전송은 각 ONU에게 할당된 별도의 단일 파장을 통하여 이루어지는 반면 상향 전송은 네 개의 ONU가 동일한 파장을 공유하도록 하였다. 따라서 동일 파장을 공유하는 ONU간 충돌을 회피하고 자원의 효율적 사용을 위하여 MAC 프로토콜이 요구된다. 이를 위해 요청/허가 기반으로 상향 채널을 공유하는 ONU 그룹 단위로 sub-MAC을 정의하여 MAC 프로토콜을 구현한다. sub-MAC은 하나의 제어부, 수신부 그리고 네 개의 송신부로 구성되므로 128개 ONU를 수용하는 가입자망은 32개의 sub-MAC을 필요로 한다. 따라서 본 논문에서는 sub-MAC 칩을 위하여 제어부의 각 기능과 기능 모듈을 정의하고 내부 신호 및 입출력 신호, 신호 간 타이밍에 따른 상태 천이도를 설계한다. 설계된 MAC 칩의 기능 검증을 위하여 ModelSIM 환경에서 로직 시뮬레이션을 수행한다.

1.5Gbps 직렬 에이티에이 전송 칩 구현 (Implementation of 1.5Gbps Serial ATA)

  • 박상봉;허정화;신영호;홍성혁;박노경
    • 대한전자공학회논문지SD
    • /
    • 제41권7호
    • /
    • pp.63-70
    • /
    • 2004
  • 본 논문에서는 PC 의 스토리지 인터페이스로 사용되는 병렬 ATA를 대체하게 될 새로운 표준인 직렬 ATA 의 링크 층과 물리 층을 설계하였다. 링크층에서는 CRC 생성 및 오류 감지, 스크램블링 회로, 8b/10b 복호화/부호화 회로 및 프리미티브 생성/검파 회로로 구성되었다. 물리 층은 직렬화/병렬화 회로와 전원 초기 인가시의 리셋 발생회로, OOB 신호 발생/검파 회로, 데이터로부터 클록을 복원하는 회로, 스?치 회로 및 임피이던스 조정 회로와 콤마 발생/감지 회로로 설계하였나. 또한 불리 층과 링크층의 동작을 확인하기 위한 테스트 제어 블록과 BIST(Built In Self Test) 블록을 설계하였다. UMC 사의 0.18㎛ 표준 CMOS 공정을 이용하여, 칩으로 제작 후 특성을 검증하였다. 링크 층에서 요구하는 모든 기능 및 특성은 사양을 만족하였고, 물리 층의 출력 전압 및 드라이버 출력 지터, OOB 신호등의 특성도 만족하였다. 데이터 전송 율은 1.5Gbps 속도의 사양목표치에 비해서, 실제 측정된 데이터 전송 속도는 1.28Gbps로 측정되었다. 회로 시뮬레이션에 의한 확인 결과, 레이아웃에서의 배선에 대한 기생 성분의 영향에 의한 것으로 분석되었다.

서비스직 근로자들의 영수증 접촉 정도에 따른 비스페놀A 노출량 조사 (Exposure to Bisphenol A through Contact with Thermal Receipts among Service Industry Workers)

  • 이유나;이유진;장지원;한가을;고영림
    • 한국환경보건학회지
    • /
    • 제40권6호
    • /
    • pp.435-441
    • /
    • 2014
  • Objectives: Bisphenol A, or BPA, is a chemical component in polycarbonate plastic with which many people come into contact every day. A great deal of controversy has arisen over its safety since this material, which is known to disrupt the human endocrine system and cause neurological difficulties and cancer, is commonplace in beverage containers, food can liners, and receipt paper rolls. In this study, we determined the levels of exposure to BPA of workers in the service industry depending on the number of receipts contacted. Methods: The participants were 16 male and 18 female workers employed in the service industry. Using a questionnaire, we investigated general and job characteristics. Urine samples were collected and analyzed by the LC-MS/MS technique after enzymatic hydrolysis and solid phase extraction (SPE). Results: The geometric mean (GM) concentration of urinary BPA from all subjects was 1.02 ng/ml. Workers were exposed significantly to more BPA according to the number of receipts they contacted, their work experience, and working hours per day. The BPA concentration of those who touched more than 100 receipts per day was 3.09 ng/ml, while that of the other participants was 0.61 ng/ml. It was shown that wearing gloves can protect from BPA exposure. Conclusion: We determined the urinary BPA concentrations of workers in service industry and found that the contact with receipts could increase the BPA exposure of service workers.

대한미세수술학회 설문조사 결과 보고 (Results of Questionnaire: The Korean Society for Microsurgery)

  • 한현언;정덕환;김우경
    • Archives of Reconstructive Microsurgery
    • /
    • 제16권2호
    • /
    • pp.133-143
    • /
    • 2007
  • For the better success in the society, it is important to collect opinions from members. The progress was slow before because it was hard to collect the opinions from each member. But since we have opened the web site it gets easier to evolve with the society for microsurgery, and expect to have active participations from the members. We make 20 questions in three different groups. The researches are made on participation, development in science council that starting from 2005 October to 2007 June, education on training with member's preference to thesis and individuality and suggestion. Thus we have results following to that research. 1.75% of the members vote for the lecture has to be substantial, and also want the atmosphere of the council to be more sincere. 46.2% of members want the council to be not only exchange information but also the place to experience the social intercourse. 2. When the thesis is present and submitted that will also connect to main society. It will be counted as equal as board thesis, only if the thesis can count in both plastic & reconstructive surgery and orthopedic surgery. Then it will be scored as same as examination of board, and will be a receipt of paper by home page 3. The information-oriented project on our council is slower than what members expected. 100% of members voted yes to online thesis examination, and 66.7% of members voted for preference of web site. We need to make improvements on our web pages as soon as possible such as online payment with credit card. 4. According to the result of questionnaire, our web site helps member's participation in council and eventually become a bridge between members. We hope the questionnaires would help us to develop the council and eventually would help us to society with each other in the council. We also hope this council would be the one that connect all of us in society.

  • PDF

전자서명 기록기를 이용한 공정한 부인방지 프로토콜의 설계 (Design of An Fair Non-Repudiation Protocol Using Digital Signature Recorder)

  • 이용준;오해석
    • 한국통신학회논문지
    • /
    • 제29권9C호
    • /
    • pp.1345-1351
    • /
    • 2004
  • 최근 인터넷의 중요성으로 보다 다양한 보안 서비스가 요구되고 있다 부인방지 서비스는 새로운 보얀 요구사항이다. 인터넷뱅킹, 증권거래시스템 , 전자의무기록, 전자상거래 등의 많은 어플리케이션은 부인방지 서비스와 관련이 있다. 그러나 통신의 기밀성이나 신원확인에 대한 보안에 비교하여 부인방지에 대한 연구는 부족했다. 이론적으로, 부인방지 프로토콜이 종료되었을 때 발신자가 수산부인 방지증거를 획득하고 수신자가 발신부인 방지증거를 동시에 획득하거나 쌍방 모두 유효한 증거를 획득하지 못하였을 때 공정하다고 정의한다. 기존의 대부분의 부인방지서비스는 신뢰된 제3자인 TIP(Trusted Third Party)를 기반으로 하여 프로토콜의 단계마다 통신에 관여한다. 따라서 TIP는 통신부하를 발생시키는 단점이 있다. 제안하는 전자서명기록기는 논리적으로 부인방지의 공정 성을 보장하연서, 물리적으로 검증서버와 함께 구성하여 네트워크의 부하를 최소화한다.

해상송부매매에서 국제매매협약상 매도인의 서류적합의무에 관한 일고찰 - 선하증권을 중심으로 - (A Study on the Seller's Obligation of Conformity of Transport Documents in Shipment Sales under CISG - Focused on Bill of Lading)

  • 허해관
    • 무역상무연구
    • /
    • 제37권
    • /
    • pp.61-85
    • /
    • 2008
  • Bills of lading are crucial in international sales on shipment terms since they guard buyers against loss of or damage to the goods in transit by giving them the rights against carriers. A bill of lading, as document of title, gives the buyer the right to demand physical possession of the goods from the carrier and enables the buyer who is in possession of damaged or short-delivered goods to sue the carrier. In this context the buyer in sales on CIF or CFR terms or FOB terms with additional services benefits from the bill of lading which functions as a receipt of goods and a evidence of the terms of the contract of carriage. Protection of such buyer's interests can be provided in the sale contract through appropriate express or implied terms on the seller's documentary obligations: Which transport document, a bill of lading or a sea waybill, is required? Who should be named as the consignee in the transport document and, in case of bill of lading, by whom should the bill be endorsed? What should be stated in the bill of lading for the quantity of the goods? How about a bill of lading that contains so called "unknown clause"? How many bills of lading for the entire contract goods should be tendered? Can a bill of lading stating that the goods have been shipped in apparent good order and condition also state that the goods were damaged after shipment? This paper seeks to provide answers for these particular questions.

  • PDF

화환신용장 거래에서 은행의 불일치서류 거절의 적시성에 관한 연구 -Federal Bank Ltd. v. VM Jog Engineering Ltd.의 사건에서의 인도 최고법원의 판결을 중심으로- (Analysis on Timely Refusal to Accept Discrepant Documents in Documentary Credit Transactions -with a special emphasis on Federal Bank Ltd. v. VM Jog Engineering Ltd, Indian Supreme Court Decision-)

  • 한재필
    • 한국중재학회지:중재연구
    • /
    • 제16권3호
    • /
    • pp.161-189
    • /
    • 2006
  • This paper is aiming at analyzing case law of India in relation with reasonable time to make decision whether to accept or to refuse the documents received from the presenter in credit transactions. As specified in UCP, the failure to refuse to accept the documents within a reasonable time precludes the Issuing Bank, Confirming Bank (if any) and Nominated Bank from asserting that they are discrepant. Compliance of the stipulated documents on their face with the terms and conditions of the credit shall be determined by international standard banking practice as reflected in this Articles of UCP 500. The Issuing bank is only to be held responsible for honoring the documents presented by beneficiary through the nominated banks if they are strictly in compliance with terms and conditions of the Credit. As any well experienced banker knows, however, a word-by-word, letter-by-letter correspondence between the documents and the credit terms means a practical impossibility. Thus the notion of reasonable care in conjunction with the doctrine of strict compliance mixed with International Standard Banking Practices has not played a right functional standard for checking the documents as stipulated in the credit and UCP 500. And so the rejection rate is highly estimated at approximately 50% in EU and 40 to 70% according to their geographical locations in the USA. As a result, it can possibly be inferred from this fact that the credit industry would be facing the functional failure as the international trade credit facility, if not supported with motive power as a relevant scheme in UCP 500. It is quite important to note that UCP 500 Article 13(b) which specify the time limit for the banks to notify the presenter their decision not to accept the documents within a reasonable time not to exceed seven banking days following the day of receipt of documents would be the motive engine to improve the negotiability of documents in international trade financial facility.

  • PDF

구상보증거래에서 보증은행의 부당한 지급거절과 주요 쟁점에 관한 연구 (A Study on Guarantor's Wrongful Dishonor and Main Issues under Counter Guarantee)

  • 채진익
    • 무역학회지
    • /
    • 제43권6호
    • /
    • pp.25-50
    • /
    • 2018
  • 국제비즈니스에서 구상보증제도는 제도적 특성과 그 간편성으로 그 청구과정에서 많은 문제점에 노출되고 있으며, 또한 이와 관련하여 실제로 많은 분쟁이 발생되고 있는 것이 현실이다. 특히 보증은행 또는 그 보증수혜자의 부당한 또는 사기적 청구, 또는 그 과정에서의 사기의 공모 또는 묵인 등이 있다. 한편 특별한 사유없이 보증은행의 지급거절 또는 법원의 지급금지명령을 통하여 거래당사자 간의 분쟁해결의 수단으로도 악용될 수 있다. 본 연구는 구상보증제도상 보증은행의 부당한 지급거절과 그 관련 쟁점에 대해 사례를 중심으로 분석하였다. 또한 본 연구는 비즈니스 관점에서 그 시사점과 적법한 대응방안을 제시하였다.

진료정보 공유를 위한 IC카드 기반 병원 진찰 카드 통합 시스템 구축 (Implementation of A Patient Card Integrating System Using by IC Card To Share A Medical Information)

  • 박두희;이남용;김윤정;이기한
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권6호
    • /
    • pp.533-541
    • /
    • 2003
  • 본 논문은 환자 진료정보 공유 시 환자의 개인 및 진료 정보 보호 문제점을 해결하기 위해서 여러 장의 진찰카드를 하나의 IC카드로 통합하기 위한 시스템을 개발하였다. 먼저, 진료정보 공유를 위한 최소데이터세트를 정의하였고, 이 최소데이터세트를 통합 병원 진찰 IC 카드에 구현하고 발급할 수 있는 발급 시스템을 개발했다. 환자의 개인정보 보안 및 인증을 위해서는 윈도우 2000 기반 전자서명 인증센터를 구축하고 3-DES 적용한 IC 카드 기반의 통합 병원 진찰 IC 카드를 개발했다. 기존 병원 전산시스템과 효율적인 연동을 위한 통합 병원 진찰 IC 카드에 의한 진료접수/예약 시스템을 개발했다. 본 연구에서 개발한 통합 병원 진찰 IC 카드 시스템을 11개 병원에서 1.000명의 환자에게 적용한 결과, 시범 대상 병원들의 환자 진료 접수/예약뿐 아니라 정보 공유의 안정적 확장을 도모할 수 있는 기반을 마련할 수 있었다.