• Journal of Korean Library and Information Science Society
• /
• v.54 no.3
• /
• pp.321-346
• /
• 2023

A data paper describing research data helps credit researchers producing the data while helping other researchers verify previous research and start new research by reusing the data. Publishing a data paper and depositing data to a public data repository are increasing with these benefits. A domestic academic society that plans to publish data papers faces challenges, including timely acquiring tremendous knowledge concerning data paper structures and templates, peer review policy and process, and trustworthy data repositories, as a data paper has different characteristics, unlike a research paper. However, the need for more research and information concerning the critical elements of data paper and the peer-review process makes it difficult to operate for data paper review and publication. To address these issues, we propose essential concepts of the data paper and the data paper peer-review, including the process model of the peer-review with in-depth analysis of five data journals' data paper templates, articles, and other guides worldwide. Academic societies intending to publish or add data papers as a new type of paper may establish policies and define a peer-review process by adopting the proposed conceptual models, effectively streamlining the preparation of data paper publication.

• Information Systems Review
• /
• v.8 no.1
• /
• pp.25-41
• /
• 2006

This paper is about how to drive a Business Process Management(BPM) implementation project from selecting a target process to BPM deployment. For guidance of BPM implementation, LG CNS BPM Methodology and enPAM(Entrue Process Assessment Model) were used. This paper focuses on the methodology of process selection and presents a case study from the telecommunication industry. The enPAM consists of three major criteria in determining process priority for BPM system deployment: business impact, BPM adequateness and implementation feasibility. These three criteria can be easily modified for other telecommunication business just as we did to suit this telecom case. Moreover, it could provide useful ideas to companies that consider introducing a BPM solution for process management. Although we propose a comprehensive design methodology for selecting a proper target business process for BPM implementation, more work is still needed to extend the results for rigorous and practical method.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.68-79
• /
• 1999

This paper describes an approach to collaborative design which focuses on the effects of individual activities on the overall design process. We utilize a new process modeling tool to define the process and then analyze and refine the process based on critical paths. This information is then shared over the Internet with all participants. The goal of this system is to detect critical errors at initial design stage and guide the designers to make better decisions based on the knowledge of the overall process. This system enables participating designers to publish his local process through an Internet bulletin board. Other members of the team can then provide feedback based on how the proposed process impacts their activities. The system provides a context-rich, persistent forum for collecting, preserving, and refining corporate expertise of the team. For example, designers can select any process from the bulletin board and use it as a template for his current project and then use it to maintain his own design history. This paper is based on the process modeling concepts of Design Roadamap and describe several key extensions in the area of CPM calculations and collaborative interfaces.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.337-339
• /
• 1992

This paper deals with the tuning method of PID controls for process controls. It introduces the normalized process gain and the normalized process dead-time for processes based on Ziegler-Nichols tuning methods. In the case of PID auto-tuning, the first, this method applies Ziegler-Nichols tuning method and introduces the set-point weighting for reducing overshoot in the large normalized process gain or small normalized process dead-time, the second, this method is modified and includes the set-point weighting in the small normalized process gain or large normalized process dead-time. In the case of PI auto-tuning, this method is modified for reducing overshoot. This paper obtains empirical data with Ziegler-Nichols methods for refined Ziegler-Nichols tuning methods.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.1
• /
• pp.173-183
• /
• 2011

Global logistics including Korea had developed at various fields through the developed IT technology. In addition, in changing into Internet based digital economy times, economic and logistics activities became extending into worldwide over the cross-border. Logistics activity performed by off-line rapidly changed in real environment. But, unfortunately business process modeling about the whole logistics was not happened, even though process modeling had done by transport stages or logistics entities. Therefore, it is difficult to grasp the whole logistics. Additional cost and time was requested due to no association between logistics entities and invisibility. So, this paper has to be process modeling for logistics industry domain. For objective modeling, work area shall be divided and it extracts general work process per each area. And then it defines subprocess of general work process. Cargo tracking in logistics industry domain means to grasp the status and present states at transportation or storage stage. This paper defines business process and data model for electronic processed work area using the UN/CEFACT standard modeling methodology.

• Korean Management Science Review
• /
• v.26 no.1
• /
• pp.127-136
• /
• 2009

This paper purposes analyzing how task assignments influence on business process efficiency, and improving business process efficiency in Business Process Management (BPM) environments. For this purpose, task assignment is categorized into dynamic assignment and static assignment. Dynamic assignment binds a user to a task at process run-time, whereas static assignments assigns a task to a user at process build-time. So far, the influence of task assignment methods has not been studied. We, in this paper, analyze the business process efficiency using two different assigning rule, in terms of cycle time as a efficiency measure. The comparison result can provide a guideline for a company who wants to employ commercial BPM systems.

• Transactions of Materials Processing
• /
• v.18 no.3
• /
• pp.229-235
• /
• 2009

This paper covers finite element simulations to evaluate the terminal crimping process of automobile electrical connector. Crimping is a classical technology process to ensure the electrical and the mechanical link between a wire and a terminal. Numerical modeling of the process is helpful to choose and to optimize the dimensions of the crimping part of the connector. In this paper, we discuss a 2D simulation of the crimping process, using explicit finite element methods (ABAQUS/Explicit) and we compare the results with experimental data from the industrial process of crimping (crimping height, crimping width and compressibility). The explicit method is preferred for the modeling of multi-contact problems, in spite of the quasi-static process of crimping. As compared with CAE analysis, a performance improvement makes certain of the truth of the matter.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.255-261
• /
• 2000

Tube bending is one of the conventional manufacturing process. Recently, tube bending was highlighted in automotive industry by hydroforming. Tube hydroforming process is divided into pre-bending process and hydroforming process. It's initial state is very important in die cavity of first hydroforming process. So tube bending is important factor of the hydroforming process. In this paper, two pre-bending simulations, by a rotary draw bending machine and a bend die. This paper presents the simulation results in pre-bending process that is used to form an automotive part, tie-bar.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.259-264
• /
• 2009

E-Commerce system now is advancing toward providing integrated trade process supports. This paper proposes an approach to integrate various trade processes and discusses the validity of the approach. Process propagation issues, which is critical in process integration, has not been treated in this paper.

• Journal of Distribution Research
• /
• v.6 no.1
• /
• pp.22-35
• /
• 2001

The focus of Business Process Re-engineering (BPR) has been extended to inter-business process that cuts across independent companies. Combined with Supply Chain Management (SCM), inter-business process reengineering (IBPR) focuses on synchronization of business activities among trading partners to achieve performance improvements in inventory management and cycle time. This paper reviews the business process reengineering movement from the historical perspective and presents a case of inter-business process reengineering using the latest internet-based Business-to- Business (B2B) technology based on Collaborative Planning, Forecasting, and Replenishment (CPFR). The case demonstrates how CPFR technology reengineers the distribution process between Heineken USA and its distributors. As world's first implementor of web-based collaborative planning system, Heineken USA reduces cycle time from determining the customer need to delivery of the need by 50% and increases sales revenue by 10％. B2B commerce on the internet is predicted to grow from $90 billion in 1999 to $2.0 trillion in 2003. This paper provides the management with the bench-marking case on inter-business process reengineering using B2B e-commerce technology.