• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.847-851
• /
• 2011

태양광 발전 시스템은 친환경성을 바탕으로 설치용량이 증가하고 있으며 효율 개선을 위한 연구가 활발하다. 고 효율 시스템 설계를 위해서는 태양전지 패널의 출력특성을 정확히 파악하는 것이 중요하다. 태양전지 패널은 단일 다이오드 모델로 물리적 특성을 표현할 수 있으나, 정확한 파라미터를 얻는 것은 여러 단계의 측정과 수치해석 등의 복잡한 과정을 거쳐야 한다. 본 논문에서는 패널 제조사의 데이터 시트에 제공되는 태양전지 패널의 I-V 특성곡선을 기반으로 패널의 단일 다이오드 모델의 특성 파라미터를 추출하는 방법을 제시하였다. 제시한 방법의 검증을 위하여, Simulink의 Solar Cell 블록에 추출한 파라미터를 입력하여 출력을 측정하고, 데이터 시트와 오차를 계산하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.559-568
• /
• 2008

This paper analyzes Korean residential tenure choice for house which is the most important in Korean households' assets. Data used in the analysis is the data of Korean Labor and Income Panel Study for the period from 1998 to 2006 and with 2341 households. In this paper, a household chooses a housing tenure mode, either by renting or by owing house. We use a mixed-logit panel model as an estimation model to take into consideration household's heteroscedasticity of preference in tenure choice. It turns out that the heteroscedasticity is significant in households' tenure choice behavior, implying that Korean housing policy emphasizing supply side should consider the demand side.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.283-289
• /
• 2000

The panel shear and bearing strengths determining the seismic resistance of reinforced concrete column-to-steel beam connections are predicted by various methods for four previously tested exterior beam-column joints. The analytical approach to model the joint deformation is also examined. Several analyses incorporating the deformations of panel shear and bearing in the joint are demonstrated using a analyses incorporating the deformations of panel shear and bearing in the joint are demonstrated using a fairly simple connection model in the commercial packages such as Drain2dx and IDARC. The strength prediction results indicated that the ASCE method with the modifcation of the comprssion strut contribution is th most accurate. It is also considered that the analytical model presented including the joint deformation can be used for the overall analysis

• Advances in materials Research
• /
• 제5권4호
• /
• pp.205-221
• /
• 2016

In this article, the buckling responses of functionally graded curved (spherical, cylindrical, hyperbolic and elliptical) shell panels under elevated temperature load are investigated numerically using finite element steps. The effective material properties of the functionally graded shell panel are evaluated using Voigt's micromechanical model through the power-law distribution with and without temperature dependent properties. The mathematical model is developed using the higher-order shear deformation theory in conjunction with Green-Lagrange type nonlinear strain to consider large geometrical distortion under thermal load. The efficacy of the proposed model has been checked and the effects of various geometrical and material parameters on the buckling load are analysed in details.

• Asian Journal of Business Environment
• /
• 제6권1호
• /
• pp.19-24
• /
• 2016

Purpose - This paper aims to find and analyze factors that determine the flows of bilateral foreign direct investment in intra-ASEAN. It specifically focuses on the dimension of macro-economic, natural resources, human resources, and the quality of governance. Research design, data, and methodology - Data were collected from 64 bilateral relations between ASEAN nations from 2002 to 2013. Panel gravity model was utilized to find factors that determine the flows of bilateral foreign direct investment. Results - Significant factors were identified that determine the flows of bilateral foreign direct investment: GDP home country, GDP host country, real interest rate, distance, and total natural resources rent. Unexpectedly, natural resources have a negative effect. Conclusions - In a situation of increasing the flow of FDI among the countries of ASEAN, the government should control the interest rates and maintain good relations with nearby countries. The negative effect of total natural resource rents implies that ASEAN countries should not depend on their natural resources to attract foreign investments.

• 제어로봇시스템학회논문지
• /
• 제10권6호
• /
• pp.487-493
• /
• 2004

In this Paper, we propose a lighting system for the stable detection of check defects of the CRT panel through the analysis of the lighting interaction between the lighting unit and the CRT panel. The check defect is very difficult to detect reliably because of its high sensitivity according to the direction of incident light. At first, we model the physical shape of check defects using SEM image. And then we apply physics based illumination model to investigate the optical characteristics of the check defect. Finally, we propose a lighting system for the stable detection of check defect. Experimental results show the feasibility of the proposed lighting system for check inspection.

• Communications for Statistical Applications and Methods
• /
• 제21권2호
• /
• pp.193-200
• /
• 2014

It was recognized by some researchers that the disturbance variance in a censored regression model is frequently underestimated by the maximum likelihood method. This underestimation has implications for the estimation of marginal effects and asymptotic standard errors. For instance, the actual coverage probability of the confidence interval based on a maximum likelihood estimate can be significantly smaller than the nominal confidence level; consequently, a Bayesian estimation is considered to overcome this difficulty. The behaviors of the maximum likelihood and Bayesian estimators of disturbance variance are examined in a fixed effects panel regression model with a limited dependent variable, which is known to have the incidental parameter problem. Behavior under random effect assumption is also investigated.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.85-91
• /
• 1998

In this paper an assessment has been proceeded about component technology that stamping car panel can be designed and manufactured efficiently. Also this study investigate standard model of CAD/CAM system in production process of automobile dies, Recently, motor companies are doing their best to increase productivity and to reduce production time. So to develop user-friendly and effective standard model of CAD/CAM system is very important. The cbtained results will lead to the reductions in lead time and man-hour required for the design and manufacture of the automobile dies.

• 한국경영과학회지
• /
• 제31권2호
• /
• pp.157-167
• /
• 2006

Estimating the effects of price increase on a company's sales is important task faced by managers. If consumer has prior information on price increase or expects it, there would be stockpiling and subsequent drops in sales. In addition, consumer can suppress demand in the short run. These factors make the sales dynamic and unstable. In this paper we develop a time series model to evaluate the sales patterns with stockpiling and short-term suppression of demand and also propose a forecasting procedure. For estimation, we use panel data and extend the model to Bayesian hierarchical structure. By borrowing strength across cross-sectional units, this estimation scheme gives more robust and reasonable result than one from the individual estimation. Furthermore, the proposed scheme yields improved predictive power in the forecasting of hold-out sample periods.

• Wind and Structures
• /
• 제4권6호
• /
• pp.481-494
• /
• 2001

Wind tunnel pressure tests were conducted on a 1:100 scale model of a large industrial building with solar panels mounted parallel to the flat roof. The model form was chosen to have the same aspect ratio as the Texas Tech University test building. Pressures were simultaneously measured on the roof, and on the topside and underside of the solar panel, the latter two combining to produce a nett panel pressure. For the configurations tested, varying both the lateral spacing between the panels and the height of the panels above the roof surface had little influence on the measured pressures, except at the leading edge. The orientation of the panels with respect to the wind flow and the proximity of the panels to the leading edge had a greater effect on the measured pressure distributions. The pressure coefficients are compared against the results for the roof with no panels attached. The model results with no panels attached agreed well with full-scale results from the Texas Tech test building.