• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.35-40
• /
• 2005

압축하중을 받는 실린더형 구조물에 대한 보강방법으로는 스킨-스트링거, 격자보강 형상 등 여러 종류가 있다. 그 중 isogrid 형상은 정삼각형형태의 보강대가 반복되는 보강구조로서 여러 가지 조합하중 및 집중하중에 대한 대처능력이 우수한 보강구조이다.본 논문에서는 격자보강 구조 중 isogrid 구조에 대한 압축 좌굴시험 및 비선형 해석을 수행하였다. Isogrid 패널은 두께가 11.43 mm, 높이가 660 mm, 외경이 2.4 m이며 70도의 원호를 이루는 알루미늄합금 일체형 구조이다. 시편에 대한 압축 좌굴시험을 통하여 국부좌굴강도, 전체좌굴강도, 국부좌굴후의 거동 등을 확인하였다. 또한 MSC/MARC를 이용한 비선형 FEM 해석을 수행하여 구조시험 결과와 비교하였다. 해석 시에는 패널의 소성 가공 시 발생한 형상공차를 고려하였다. 시험결과와 해석결과는 좌굴하중 및 좌굴모드가 모두 비교적 일치하였다.

• 한국항만경제학회지
• /
• 제29권3호
• /
• pp.95-111
• /
• 2013

본 연구는 한 ASEAN FTA의 교역효과를 살펴보기 위해 패널분석을 실시하였다. Panel Unit Root Test, Panel Cointegration Test, Pooled OLS, Hausman Test, Fixed Effect, Random Effect를 살펴보았다. 분석자료는 ASEAN회원국 10개국 중 우리나라와 교역규모가 적은 브루나이, 라오스, 미얀마, 캄보디아 4개국은 제외하고, 인도네시아, 말레이시아, 필리핀, 싱가포르, 타이, 베트남 등 6개국의 1997년부터 20011년까지 15년간의 년간 자료를 분석하였다. 본 연구의 시사점은 우리 정부는 세계적인 FTA 확산추세에 대응하고 안정적인 해외시장 확보를 통한 경쟁력을 강화하기 위해서 FTA 체결 효과를 극대화할 필요가 있다. 또한 WTO의 상품과 서비스관련 규정에 일치하는 높은 수준의 FTA 체결을 지향함으로써 다자주의를 보완하고, FTA를 통해 국내제도의 개선 및 선진화까지를 도모할 필요가 있다. 이 모든 노력에도 불구하고 FTA가 성공적으로 추진되기 위해서는 무엇보다도 FTA의 추진에 따른 교역 증진 효과를 분석하여 FTA 추진과정의 투명성을 제고하고, FTA 추진과정에서 전문가의 의견을 최대한 반영할 필요가 있다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.180-188
• /
• 1997

The theoretical analysis and experiment with simulator were performed to obtain the temperature distributions in radiant heating panel and heat supply from hot water to heating space for the purpose of the development of comfortable living space from a point of view of the improvement of air quality and the enhancement of system efficiency. The relations of various parameters, such as pipe pitch, room temperature as well as flow rate and temperature of hot water and so on, with the rate of heat supplied, mean temperature and maximum temperature difference at panel surface were discussed. The effects of these parameters were also verified on the thermal performance of heating panel using the relations which could be used for the optimal design and operation of the radiant heating panel.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.41-46
• /
• 2015

This paper describes study results on the development of an automatic program for generating surface-panel grid for the aircraft optimal design. The aerodynamic analysis is combined into a PIDO tool in conjunction with a number of programs in order to integrate processes for the optimal design. Due to design optimization's iterative feature, it may require lots of time and cost. To relieve this problem, cost-reduction of computation time for aerodynamic analysis is pursued by using the Panel-method, and reduction of grid generation time by automating surface panelling.

• Structural Engineering and Mechanics
• /
• 제37권5호
• /
• pp.529-542
• /
• 2011

Three dimensional solutions for free vibrations analysis of functionally graded fiber reinforced cylindrical panel are presented, using differential quadrature method (DQM). The orthotropic panel is simply supported at the edges and is assumed to have an arbitrary variation of reinforcement volume fraction in the radial direction. Suitable displacement functions that identically satisfy the simply supported boundary condition are used to reduce the equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which can be solved by differential quadrature method to obtain natural frequencies. The main contribution of this work is presenting useful results for continuous grading of fiber reinforcement in the thickness direction of a cylindrical panel and comparison with similar discrete laminate composite ones. Results indicate that significant improvement is found in natural frequency of a functionally graded fiber reinforced composite panel due to the reduction in spatial mismatch of material properties.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.115-126
• /
• 2004

In the present work a finite element formulation using dynamic-explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and dynamic explicit formulation. Analyzed auto-body panel stomping process correction of forming using software called Dynaform using dynamic extensive method. Further, the simulated results for the auto-body panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.278-283
• /
• 2003

Analysis has been carried out to investigate the temperature variation and the uniformity of the temperature distribution of the glass panel by infrared radiant heating. Halogen lamps are used to heat the panel and located near the top and bottom of the rectangular chamber. The thermal energy is transfered only by radiation and the radiation exchange occurs only on the solid surfaces and is considered by using the view factor. The results show that the uniformity of the temperature distribution of the panel is improved but the time for heating increases as the wall reflectivity is large. The temperature difference reaches a maximum in the early stage of the heating process and then decreases until it reaches the uniform steady-state value.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.30-36
• /
• 2005

The static implicit finite element method is applied effectively to analyze total tray panel stamping processes, which include the forming stage. Complicated and abnormal large size tray panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Further, the simulated results for the total tray panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.67-70
• /
• 2005

The static implicit finite element method is applied effectively to analyze total roof panel stamping processes, which include the forming stage. complicated and abnormal Large size roof panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Further, the simulated results for the total roof panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.391-396
• /
• 2014

For the purpose of finding out the acoustical characteristics of exterior materials in bridge, analytical studies are performed with boundary elements method by using the commercial program SYSNOISE. Before analysis, to figure out material property, it was conducted experiments of absorption coefficient for absorptive material. And prediction of pressure were conducted I GIRDER type (before & after installation of absorption panel ) and BOX GIRDER type (before & after installation of absorption panel) The results show that when the absorption panel is installed, environment around bridge can help reduce traffic noise. It was proved to be the effective noise reduction counter-plan for a traffic noise in the bridges.