• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.13-16
• /
• 2004

The PCS system, which consists of precast concrete column and steel beam, has been developed. The system is expected to achieve the effectiveness in the constructability and improve the structural performance under earthquake. New types of joint system for the panel zon and column connection has been developed in order to improve the shear strength capacity and rigidity of the of the system. The cyclic seismic test recommended by ACI was conducted to verify the structural performance of the system. As a test results, it is observed that the system satisfy most of the requirements by ACI criteria.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.350-357
• /
• 2019

We analyzed the system efficiency of small solar power plants with 80% of total solar power plants. The data of the solar power plant with installed capacity of 100kW was collected and the correlation of the ESS efficiency according to the capacity of the PCS and the battery of each power plant was deduced. As a result, the higher the C-rate value affecting the discharge rate of the battery, The discharge efficiency of the plasma display panel is increased.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.125-129
• /
• 2018

In order to develop a smart cultivation facility based on ICT (Information Communication Technology), a cultivation house was selected. Sensor devices were installed to monitor any changes in the cultivation environment. A control panel was constructed to monitor and control the data on environmental changes collected by the sensors. To efficiently manage the proceedings of the cultivation environment, the cultivation process was divided into 4 stages. We designed an environmental control module using these processes. PC and mobile phone software were designed for remote monitoring and control to develop a smart cultivation system that can conveniently manage the cultivation environment and produce mushrooms in a more stable manner.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2747-2754
• /
• 2012

This thesis explains the development of multiple LCD system with the additional function to maximize the utilization of PC contents. The newly developed system is composed of host LCD and slave LCD. Host LCD decodes and outputs the image and voice of NTSC, PAL, SECAM signals. It also converts the decoded signals into LVDS signals before transmitting them to slave LCD stage. In addition, the installation of CF Memory and USB Memory helps display multi-media data. Unlike the host LCD, since not including the tuner and memory part, the slave LCD can't receive TV signals and play video signals. It only has the function to receive LVDS image signals and display on a LCD panel. This newly developed multi-LCD system has competitiveness in various aspects. With its simple structure, the failure rate, price and display power are relatively low due to its simplification of the control part. It has price and functional competitiveness as the product whose host LCD can control the entire slave LCD in terms of channel, volume, and video output.

• Fire Science and Engineering
• /
• v.23 no.3
• /
• pp.110-120
• /
• 2009

In tunnel, though the frequency of fire occurrence is relatively lower than other structures, the characteristics of sealed space tends to cause the temperature to rapidly rise to more than $1000^{\circ}C$ within 5minutes after fire, which might eventually lead to a large fire that usually results in a loss of lives and the damage to the properties, not to mention a huge cost necessary for repair and maintenance after fire. We have developed various conditions of the heating furnace and the method to install a thermo couple within the furnace based on EFNARC and KS F 2257-1. Referring to tunnel fire scenarios, it clarified the heat transfer characteristics of concrete PC panel lining depending on fire intensity (ISO, $1^{\circ}C$/SEC, MHC, RWS), and to identify the range of thermal damage, the evaluation was carried out using ITA standard. As a result, 30mm under ISO fire condition, 20mm under $1^{\circ}C$/SEC, 100mm under MHC and 50mm under RWS were measured. And when it comes to spalling, 30mm was measured under RWS and MHC.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.171-178
• /
• 2023

In this paper, we propose a smart automated warehouse to maximize space utilization. Previous elevator-type automatic warehouses were designed with a maximum payload of 100kg on trays, which has the problem of extremely limiting the number of pallets that can be loaded within the space. In this paper, we design a smart warehouse that can maximize space utilization with a maximum vertical stiffness of 300kg. As a result of the performance evaluation of the implemented warehouse, the maximum payload was 500.6kg, which satisfied the original design and requirements, the lifting speed was 0.5m/s, the operating noise of the device was 67.1dB, the receiving and forwarding time of the pallet was 36.92sec, the deflection amount was 4mm, and excellent performance was confirmed in all evaluation items. In addition, the PLC control method, which designs the control UI and control panel separately, was integrated into the PC system to improve interoperability and maintainability with various process management systems. In the future, we plan to develop it into a fully automatic smart warehouse by linking IoT sensor-based logistics robots.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.4
• /
• pp.85-95
• /
• 2014

In the e-commerce, the conversion into the multi-media is the important issue. According to the research by Nielsen Korea, the 83% of customers who purchase the products in the e-commerce utilize multi-channel to buy the products such as mobile and online [3]. Thus, to effectively implement online advertising, marketers should understand the customers' path [15] in the multi-channel. The study of the multi-site activities plays an important role to predict customers' purchase [28]. To explain the e-commerce site visit activities of customers, we have developed research model in terms of the online advertising. This research model is based on the study of Moe and Fader [23]. There are two types of composition in the research model. First, general site visit as an exploratory search have net effect on the shopping site visit because customers could acquire or develop information on the e-commerce site via online advertising. Secondly, the e-commerce site visit as a goal-directed search cause threshold of the e-commerce site visit because customers could achieve their goal. When the threshold is increased, the probability of a shopping site visit is decreased and vice versa. Thus, we have investigated the impact of customers' previous visit activities (general site visit and shopping site visit) on the next e-commerce site visit in terms of dynamic view. Research data was provided by Cheil World Wide. This panel data include mobile and online log data of panelists from Jan. 2013 to March 2013. As the results, the customers' e-commerce site visit on the online media would decrease the probability of e-commerce site visit because these visit activities increase the threshold of e-commerce site visit. This result is similar with the previous study [23]. Otherwise, since e-commerce site visit on the mobile media decrease the threshold, the customers' probability of e-commerce site visit would increase In summary, the site visit activities on the mobile could improve the probability of e-commerce site visits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.290-290
• /
• 2012

터치패널은 키보드나 마우스와 같은 입력장치를 사용하지 않고, 스크린에 손가락, 펜 등을 접촉하여 입력하는 방식이다. 누구나 쉽게 입력할 수 있는 장점으로 인해 기존에는 현금인출기, 키오스크 등 공공분야에 주로 많이 사용되어 왔으나, 최근의 터치스크린은 휴대폰, 게임기, 네비게이션, 노트북 모니터 등 개인정보기기의 입력장치로 활용분야가 넓어져가고 있다. 기존 터치패널은 유리 기판 위에 ITO박막(투명전도막)을 진공코팅하여 사용하여 왔지만, 최근 터치패널은 경량화를 고려하여 PET 필름 기판 위에 ITO 박막을 진공코팅하여 사용하고 있다. PET 필름의 유연성 때문에 ITO 코팅된 필름을 PC 혹은 강화유리 위에 OCA 물질을 이용하여 다시 고정하여야 한다. 이때 터치패널 제작시 생산공정이 늘어나 생산성이 떨어지고, 터치패널의 광투과율도 떨어지는 2차적인 문제가 발생한다. 이를 해결코자하는 터치페널 업체의 Needs가 있고, 최근에 이를 해결하기 위하여 PC, 강화유리 그리고 COP 기판 위에 ITO 박막을 직접 진공코팅하는 공정개발이 진행되고 있다. ITO 박막은 진공코팅 중에 열을 가하여 결정화를 이루어야 하는데, PC, 강화유리 그리고 COP 기판의 열에 약한 특성을 고려하여, 열을 가하지 않고 ITO 박막을 진공 코팅하여야 한다. 이러한 ITO 박막의 진공코팅 공정에는 In-line magnetron sputtering system이 사용된다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 강화유리 기판위에 정전용량방식 터치패널용 패턴 인비저블 ITO 투명전도막을 제작하고 그 특성을 조사하였다. ITO 박막의 면저항은 230O hm/cm2, 최고 광투과율은 90.96%(@541-543nm), 그리고 550 nm에서 광투과율은 90.45%로 ITO 박막 코팅 전후에 투과율 차이가 0.4임을 확인하였다. 정전용량 방식의 터치패널에서는 ITO 박막 코팅 전후에 투과율 차이가 1 이하의 특성, 즉 패턴 인비저블의 특성을 필요로 하는데, 이는 ITO 박막 패턴후에 패턴이 보이지 않게 하기 위해서이며, 이러한 시장의 Needs를 고려하면 본 연구에서 매우 중요한 연구 성과를 얻었다고 말할 수 있다. 그리고 면저항 기준 150에서 230Ohm/cm2 사이 여러 종류의 ITO 투명전도막을 제작하고 그 특성을 조사하여, 이를 논하고자한다. (본 연구는 지식경제부 사업화연게기술개발 연구지원금으로 일부 이루어졌음).

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.103-114
• /
• 2022

Global virtual reality (VR) and augmented reality (AR) markets are growing as VR and AR become a new source of revenue for industries around the world. In the edutech sector, an industry that combines traditional education, research on new innovative educational models and business models are scarce, and improvements are needed in the technology group and business environment to realize edutech in detail. Therefore, this study aims to define the elements strategically required for VR Toon development by comparing and analyzing the characteristics of existing touch panel-based display Toon and VR Toon content experiences. Tablet PC Toon and VR Toon were selected to conduct the research. Thirty people (19 men and 11 women) from their teens through their forties were surveyed using questionnaires. The questionnaires were formulated through a quantitative method by using AttrakDiff with a 7-point scale (-3: negative words to 3: positive words). Qualitative evaluations were also performed addressing nine concepts (satisfaction, novelty, operability, creativity, understanding, education, interest, participation, expressiveness). As a result, the usability test results of educational content using tablet personal computers and VR equipment were analyzed from the viewpoint of user experience to define elements expected to be strategically required for VR Toon development.