• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.115-122
• /
• 1992

Sandwich구조는 복합구조의 특별한 hybrid구조의 형태로써 두 층의 얇은 표면재와 가운데 두꺼운 층인 경량의 심재로 구성되어 있으며, 이는 표면재와 심재가 접착된 일체로써 서로의 단점을 보완하면서 구조 효율을 높인 형상이다. 또한 심재는 표면재에 비해서 상당히 두꺼운 두께를 갖기 때문에 전단 변형이 중요하므로 굽힘 강성도(bending stiffness) 계산에 전단효과가 고려되어야 한다. 구조 설계에서 중요한 목적은 중량 감소에 있기 때문에 본 논문에서는 sandwich panel의 설계시 표면재와 심재의 두께 및 재질을 변화시켜 제한조건에 맞는 최소 중량을 얻는 데 중점을 두었다. 본 해석에서 sandwich panel의 최소중량을 얻기 위하여 표면재와 전단력을 고려한 심재의 변형에 따른 변형에너지를 각각 계산한 후, 최소 potential 에너지 원리를 적용하여 목적함수의 최적치를 구하였다. 설계 제한조건으로는 허용 처짐, 허용 굽힘응력, 허용 전단응력과 국부적인 불안정 상태의 wrinkling 응력이 고려되었으며, 설계 모델은 수직 분포 하중에 의한 여러가지 경계조건에 따른 sandwich panel을 대상으로 하였다. 비선형 최적화 기법은 Nelder and Mead Simplex Search Method와 Hooke and Jeeves Pattern Search method에 External Penalty Function이 적용된 SUMT방법을 결합시킨 SUMTNM와 SUMTHJ를 사용하였으며, 해석 결과는 sandwich panel의 구조 설계에 활용할 수 있도록 표를 작성하였다.

• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.32-42
• /
• 1995

프로펠러 뒷날과 같이 두께가 아주 얇아지는 경우, 또는 선미에서와 같이 물체 표면의 곡률이 급격하게 변하는 경우 등에서는 기존의 평균평면 패널로 물체의 표면을 대치하며 경계적분 문제를 다루면, leakage 문제를 야기하거나 유동장점이 패널에서 아주 가까이 있을 경우에는 유기속도 포텐셜이 부정확해 지는 등의 문제가 있다. 쌍곡면 패널은 그 위에 분포된 다이폴에 의해 유기되는 포텐셜을 근사화하지 않고 정확하게 계산할 수 있도록 한다. 본 연구는 방곡면에 분포된 균일 밀도의 다이폴에 의해 유기되는 포텐셜을 표현하는 적분식을 수치적으로 계산하기에 유용한 2가지 서로 다른 방법, 즉, Gauss-Bonnet 정리를 이용하여 증명하는 방법과 면적분을 선적분으로 치환하는 방법, 을 유도하고 그 정확성을 소개한다.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.971-980
• /
• 1997

This study is to investigate the stiffness degradation of a composite laminated panel including transverse matrix cracks subjected to bending and twisting moments. Micromechanics theory on the composite material is derived by introducing crack density. Iterative numerical scheme is developed to calculate the degraded composite stiffness which has nonlinear relation due to the crack density. The finite element method is used for structural analysis of the composite panel. Structural responses of the composite panel are examined for various laminated angles and crack density under the bending and twisting moments. Also, the effect of crack opening and closing is considered in the examination. It is realized that the matrix cracks may cause severe stiffness reduction and should be considered in the composite laminated panel.

• Steel and Composite Structures
• /
• 제24권6호
• /
• pp.727-740
• /
• 2017

The present paper studies the stability analysis of the continuously graded CNT-Reinforced Composite (CNTRC) panel stiffened by rings and stringers. The Stiffened Panel (SP) subjected to axial and lateral loads is reinforced by agglomerated CNTs smoothly graded through the thickness. A two-parameter Eshelby-Mori-Tanaka (EMT) model is adopted to derive the effective material moduli of the CNTRC. The stability equations of the CNRTC SP are obtained by means of the adjacent equilibrium criterion. Notwithstanding most available literature in which the stiffener effects were smeared out over the respective stiffener spacing, in the present work, the stiffeners are modeled as Euler-Bernoulli beams. The Generalized Differential Quadrature Method (GDQM) is employed to discretize the stability equations. A numerical study is performed to investigate the influences of different types of parameters involved on the critical buckling of the SP reinforced by agglomerated CNTs. The results achieved reveal that continuously distributing of CNTs adjacent to the inner and outer panel's surface results in improving the stiffness of the SP and, as a consequence, inclining the critical buckling load. Furthermore, it has been concluded that the decline rate of buckling load intensity factor owing to the increase of the panel angle is significantly more sensible for the smaller values of panel angle.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.58-66
• /
• 2006

Threshold limit value (TLV) test between expert and consumer panel was conducted about absolute, recognition and difference threshold respectively. And we tried to suggest appropriate and minimum acceptable menthol concentration level by consumer panel. Determination of threshold value was based on ASTM E 679-79 method by forced-choice ascending concentration series. In addition, a semi-ascending paired difference method was referred to conduct test. The group threshold value was determined as the value of geometric mean individual threshold. The smokers were dividend by two groups, trained and consumer panel. Trained panel was selected according to sensitivity to menthol discrimination. Consumer panel wasrecruited in proportion as population ratios including female smokers. They were all over twenty years old volunteers and summed up thirty four persons. In terms of sensor evaluation, overall difference test with seven-category scale by both trained and consumer panelists were done. On judging correct or incorrect answer, two by three cut-off levels applied to. Every test was conducted with two sessions, before smoking and during smoking period. And, only two samples served each paneI per test with regard to sensory fatigue and reliable results. All tests were replicated, and in total 32 times per panelist. In conclusion, the recognition threshold about consumer and expert panel was 358 ppm/cig. and 276 ppm/cig. in separately. Besides, absolute and difference thresholds were obtained also. And, we conduct difference threshold test with two different ways, upward and downward. And, The results of each method were 246, 195 ppm/cig., 1414, 1336 ppm/cig. and 1047, 972 ppm/cig.

• 한국지반공학회논문집
• /
• 제37권3호
• /
• pp.43-50
• /
• 2021

우리나라는 산지가 많은 지형적인 특성으로 도로와 도시 개발에 따라 산지를 굴착하고 옹벽을 설치하는 공사가 매년 증가하고 있다. 특히 Panel식 옹벽은 안정성이 높기 때문에 사용빈도가 높으며, 일반적으로 Bottom-up방식을 사용하고 있다. 하지만 옹벽을 설치하기 위해 1:0.3정도의 기울기로 굴착 후 옹벽을 시공하는 방식인데 이러한 방식은 경사굴착으로 인해 추가 토공처리가 필요하며, 되메움과 다짐불량에 의한 안정성 저하 등의 문제점을 지니고 있다. Top-down방식의 경우 이러한 문제점을 보완할 수 있다. 하지만 Panel을 사면에 부착시키기 위해 사용되는 모르타르로 인해 옹벽과 사면 사이에 불투수층이 생긴다. 따라서 본 연구에서는 가상의 사면에 불투수층을 고려하여 배수시스템들의 역할이 우기시 사면의 안정성에 미치는 영향에 대하여 비교 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.369.2-369
• /
• 2002

For the evaluation of the plasma display panel (PDP)'s noise, vibration and sound characteristics of fanless PDP are measured and investigated. PDP is a type of two-electrode vacuum tube which operatres on the same principle as a household fluorescent light. An inert gas such as argon or neon is injected between two glass plates on which transparent electrodes have been formed, and the glass is illuminated by generating discharge. (omitted)

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.743-745
• /
• 2002

We reported the possibility of color filtering of white method for achieving full-color displays using OELDs. Here, we fabricated white organic electroluminescent devices (OELDs) and drove moving images with a 384${/times}$160 pixel.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.191-203
• /
• 1992

To analyze the unsteady heat transfer phenomena in radiant heating panel, a mathematical model was considered. Numerical analysis for solving the governing equations was conducted by using the finite difference method with boundary-fitted meshes. Transient temperature distributions and thermal responses in heating panel were obtained for various design parameters such as pipe pitches, pipe diameters and pipe depths. Experimental results were also obtained to verify the results of calculation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권4호
• /
• pp.161-165
• /
• 2005

Need of a dimmer function becomes more important with increasing interest on a HDTV for home theater applications. In a conventional AC PDP, a possible method to reduce luminance of a whole Panel is to reduce a total number of sustain pulses and then to change the gray level. However, the reduction of the total sustain number causes the step of luminance to be rough. Moreover, it is impossible to control the luminance of the panel for a given gray level. In this paper, a simple and robust method is proposed to control linearly the luminance of whole panel by applying the asymmetric sustain pulses in the display period of the ADS driving scheme. As the range of luminance control by the proposed method is about $50\%$ for a given gray level. Moreover, it is experimentally verified that the proposed method shows similar dynamic margin performances compare with the conventional method.