• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.363-371
• /
• 2023

한 척의 선박을 건조하기 위해서는 다양한 크기의 블록(block)들을 이동 및 탑재해야 한다. 이러한 과정에서 블록의 체결 방법 및 각 조선소 설비 특성에 맞는 다양한 기능에 부합하는 러그를 사용하고 있다. 블록 구조의 중량 및 형태에 따라서 러그의 크기와 형상이 다양하며, 샤클(shackle)이 체결되는 홀 주변에 부족한 강성을 보완하기 위하여 덧판(doubling pad)을 용접하여 구조를 보강한다. 리프팅(lifting) 조건별 러그의 설계를 하는 방법은 보 이론(beam theory)에 의한 수계산 방법과 유한요소해석 모델링을 이용한 구조해석을 수행하고 있다. 해석적 방법의 경우, 요소의 종류와 모델링 방법에 따라서 결과 차이가 발생하여 표준화된 평가법의 정립이 필요한 상황이다. 이러한 모호한 방법론 적용 시 블록의 이동 및 반전(turn-over) 과정 중에서 심각한 안전 문제를 유발할 가능성이 있다. 본 연구에서는 러그의 실제 탑재공정에 따른 구조 응답을 평가할 수 있는 모델링 조건, 평가법을 확정하고자 다양한 변수의 영향을 수치 구조해석을 통하여 비교 및 분석하였다. 러그 홀(hole) 주변 덧판부와 용접 비드(bead)를 표현한 모델링 기법이 가장 실제적인 거동 결과를 주고 있다. 실제 러그와 동일한 조건(용접부 비드만 주재료와 연결)의 모델링에 등가하중을 적용한 결과는 MPC 하중 적용 결과보다 낮은 최종강도를 나타낸다. 더불어 해석 시간 단축을 위해서 2차원 쉘(shell) 요소를 적용한 경우, 덧판 두께를 85% 수준으로 감소시켜서 안전사용하중을 예측할 수 있음을 확인하였다. 논문에서 검토한 다양한 변수의 영향들 결과는 러그 설계 및 안전사용하중 예측에 근거 자료로 활용될 것으로 기대된다.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.82-88
• /
• 2007

Sn-3.0Ag-0.5Cu lead fee solder was generally utilized in electronics assemblies. But it is insufficient to research about activation energy(Q) that is applying to evaluate the solder joint reliability of environmental friendly electronics assemblies. Therefore this study investigated Q values which are needed to IMC formation and growth of Sn-3.0Ag-0.5Cu/Cu and Sn-40pb/Cu solder joints during aging treatment. We bonded Sn-3.0Ag-0.5Cu and Sn-40Pb solders on FR-4 PCB with Cu pad$(t=80{\mu}m)$. After reflow soldering, to observe the IMC formation and growth of the solder joints, test specimens were aged at 70, 150 and $170^{\circ}C$ for 1, 2, 5, 20, 60, 240, 960, 15840, 28800 and 43200 min, respectively. SEM and EDS were utilized to analysis the IMCS. From these results, we measured the total IMC$(Cu_6Sn_5+Cu_3Sn)$ thickness of Sn-3.0Ag-0.5Cu/Cu and Sn-40Pb/Cu interface, and then obtained Q values for the IMC$(Cu_6Sn_5,\;Cu_3Sn)$ growth of the solder joints.

• 한국자원식물학회지
• /
• 제20권1호
• /
• pp.63-68
• /
• 2007

본 연구는 호도나무 교잡종 과실의 양적 및 질적형질의 특성을 조사하였으며 입중 및 인중, 인중비 등 과실의 주요형질에 의한 품질이 우수한 개체를 선발하여 신품종을 육성하는데 필요한 기초자료로 활용하는 데 그 목적이 있다. 입중이 13g 이상이고 인중비가 50%이상의 양적형질의 선발기준에 의해 산성4호${\times}$Concord 8번 개체 등 4개체가 우량개체로 가장 유망시 되었다. 특히 봉합선 폭은 인중비가 높은 우량과실 및 개체를 선별할 수 있는 중요한 요인임을 확인할 수 있었으며 인중과 입중이 무거울수록 인의 길이가 긴 것으로 조사되었다. 격막의 두께는 두꺼울수록 인의 분리가 어려운 것으로 나타나 인의 분리용이도에 영향을 미치는 것으로 조사되었다. 질적형질은 개체 및 교배조합간 차이가 있는 것으로 조사되었으며 모든 형질에 대하여 동일개체 내에서 다양한 특성이 동시에 관찰되었다.

• Journal of Welding and Joining
• /
• 제30권2호
• /
• pp.65-69
• /
• 2012

Environmental and health concerns over the lead have led to investigation of the alternative Pb-free solders to replace commonly used Pb-Sn solders in microelectronic packaging application. The leading candidates for lead-free solder alloys are presently the near eutectic Sn-Ag-Cu alloys. Therefore, extensive studies on reliability related with the composition have been reported. However, the insufficient drop property of the near eutectic Sn-Ag-Cu alloys has demanded solder compositions of low Ag content. In addition, the solder interconnections in automobile applications like a smart box require significantly improved vibration resistance. Therefore, this study investigated the effect of alloying elements (Ag, Bi, In) on the vibration fatigue strength. The vibration fatigue was conducted in 10~1000Hz frequency and 20Grms. The interface of the as-soldered cross section close to the Cu pad indicated the intermetallic compound ($Cu_6Sn_5$) regardless of solder composition. The type and thickness of IMC was not significantly changed after the vibration test. It indicates that no thermal activities occurred significantly during vibration. Furthermore, as a function of alloying composition, the vibration crack path was investigated with a focus on the IMCs. Vibration crack was initiated from the fillet surface of the heel for QFP parts and from the plating layer of chip parts. Regardless of the solder composition, the crack during a vibration test was propagated as same as that during a thermal fatigue test.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.611-616
• /
• 2010

A cobalt oxide - tin oxide nanocomposite based gas sensor on an $SiO_2$ substrate was fabricated. Granular thin film of tin oxide was formed by a rheotaxial growth and thermal oxidation method using dc magnetron sputtering of Sn. Nano particles of cobalt oxide were spin-coated on the tin oxide. The cobalt oxide nanoparticles were synthesized by polymer-assisted deposition method, which is a simple cost-effective versatile synthesis method for various metal oxides. The thickness of the film can be controlled over a wide range of thicknesses. The composite structures thus formed were characterized in terms of morphology and gas sensing properties for reduction gas of $H_2$. The composites showed a highest response of 240% at $250^{\circ}C$ upon exposure to 4% $H_2$. This response is higher than those observed in pure $SnO_2$ (90%) and $Co_3O_4$ (70%) thin films. The improved response with the composite structure may be related to the additional formation of electrically active defects at the interfaces. The composite sensor shows a very fast response and good reproducibility.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.733-740
• /
• 2010

본 연구는 장판재질의 바닥에 마네킹을 놓고 심폐소생술 시행 시 무릎보호를 한 경우와 하지 않는 경우 간에 심폐소생술의 질에 차이가 있는지를 알아보고자 하였다. 연구 대상자는 2009년 4월 20일부터 11월 15일까지 AHABLS Provider Course를 이수한 G도, U광역시 대학생들로 실험군 48명, 대조군 56명으로 하였다. 본 연구에서는 실험 처치를 위해 무릎을 보호할 수 있는 무릎보호대(재질: 폴리에스터 100%, 두께: 2.5cm, 가로: 16cm${\times}$세로: 17cm)를 제작하였으며, 심폐소생술 질 측정도구는 Resusci Anne(Leardal, Norway) 마네킹과 연결하여 Resusci Anne SkillreporterTM(Leardal, Norway)로 심폐소생술 시행 결과를 기록하였다. 수집된 자료는 SPSS/PC+(version 14.0)을 사용하였다. 본 연구의 결과는 장판재질의 바닥에서 심폐소생술을 시행 시 무릎보호를 한 경우가 성별, 신장과 체중에 상관없이 심폐소생술의 질이 더 우수하였다.

• 대한미생물학회지
• /
• 제35권2호
• /
• pp.117-127
• /
• 2000

The non-ELR-containing CXC chemokines Mig and IP-10 have been shown to function as chemotactic cytokines for activated T lymphocytes. In this study, we examined the potential involvement of Mig and IP-10 in antimycobacterial response of mice immunized or infected with M. bovis BCG. The accumulation of Mig and IP-10 mRNA in resident peritoneal monocytes ($RPM{\Phi}$) was slightly reduced by stimulation with vBCG, and the degree was greater for 24 hr culture even though IFN-${\gamma}$ was added. Expression of Mig, IP-10, and IFN-${\gamma}$ in 24 hr delayed-type hypersensitivity (DTH) response was stronger in vBCG-immune mice than in the non-immune. The increase of DTH measured by foot-pad thickness appears to be clearly related to the levels of chemokines Mig and IP10 messages and those of IFN-${\gamma}$ and IL-12. Stimulation with vBCG for 2 days decreased or completely dropped the levels of Mig message in non-immune or immune splenocytes, respectively, whereas IP-10 message was slightly decreased in 2 days culture. Moreover, messages for IL-12 (p40) showed similar kinetics for Mig. The levels of Mig and IP-10 mRNA during the course of infection with BCG were not readily changed in lungs, livers, and spleens from BCG-infected mice. Although there was no obvious changes of Mig and IP-10 messages in the target organs during infection process, we found that the infection progressed over the first 3 wk before being contained by the emerging immune response suggested from detectable amount of IFN-${\gamma}$ mRNA around this time. In view of selectivity of chemokines Mig and IP-10 for activated T cells, these data suggest that chemokine Mig and IP-10, especially in collaboration with IL-12 and IFN-${\gamma}$, may playa role as T cell recruiters in immune response against mycobacterial infection.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.132-136
• /
• 2017

We synthesized potassium hexatitanate, ($K_2Ti_6O_{13}$, PT6), with a non-fibrous shape, by acid leaching and subsequent thermal treatment of potassium tetratitanate ($K_2Ti_4O_9$, PT4), with layered crystal structure. By controlling nucleation and growth of PT4 crystals, we obtained splinter-type crystals of PT6 with increased width and reduced thickness. The optimal holding temperature for the layered PT4 was found to be ${\sim}920^{\circ}C$. The length and width of the PT4 crystals were increased when the nucleation and growth time were increased. After a proton exchange reaction using aqueous 0.3 M HCl solution, and subsequent heat treatment at $850^{\circ}C$, the PT4 crystal transformed into splinter-type PT6 crystals. The frictional characteristics of the friction materials show that as the particle size of PT6 increases, the coefficient of friction (COF) and wear amounts of both the friction materials and counter disc increase.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.340-346
• /
• 2005

Major quality features of the beef carcass in most countries including Korea are size, marbling state of the lean tissue, color of the fat and lean tissue, and thickness of back fat of the 13th rib. To evaluate the beef quality, extracting loin parts from the sectional image of the 13th beef rib is crucial and is the first step. However, because of the inhomogeneous distribution and fuzzy pattern of the fat and lean tissues on the beef cut, it is difficult to extract automatically the proper contour of the lean tissue. In this paper, a prototype mobile beef quality measurement system, which can be implemented practically at the beef processing site was developed. The developed system was composed of the hand held image acquisition unit and mobile processing unit mounted with touch-pad screen. Algorithms to extract the boundary of the lean tissue and a proper tool to evaluate the marbling status have been developed using color image processing. The boundary extraction algorithm showed successful results for the beef cuts with simple and moderate patterns of the lean tissue and fat. However, it had some difficulty in eliminating complex pattern of the extraneous tissues adhered to the lean tissue in the boundary extraction. The developed algorithms were implemented to the prototype mobile processing unit.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.247-256
• /
• 2015

This study prepared fabric-heating elements of carbon nanofiber composite to characterize morphologies and electrical properties. Carbon nanofiber composite was prepared with 15wt% PVDF-HFP/acetone solution, and 0, 1, 2, 4, 8, and 16wt% carbon nanofiber. Dispersion of solution was conducted with stirring for a week, sonification for 24 hours, and storage for a month, until coating. Carbon nanofiber composite coated fabrics were prepared by knife-edge coating on nylon fabrics with a thickness of 0.1mm. The morphologies of carbon nanofiber composite coated fabrics were measured by FE-SEM. Surface resistance was determined by KS K0555 and worksurface tester. A heating-pad clamping device connected to a variable AC/DC power supply was used for the electric heating characteristics of the samples and multi-layer fabrics. An infrared camera applied voltages to samples while maintaining a certain distance from fabric surfaces. The results of morphologies indicated that the CNF content increased specifically to the visibility and presence of carbon nanofiber. The surface resistance test results revealed that an increased CNF content improved the performance of coated fabrics. The results of electric heating properties, surface temperatures and current of 16wt% carbon nanofiber composite coated fabrics were $80^{\circ}C$ and 0.35A in the application of a 20V current. Carbon nanofiber composite coated fabrics have excellent electrical characteristics as fabric-heating elements.