• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.145-153
• /
• 2013

In this study, shear punch-creep (SP-Creep) at Sn-4Ag/Cu pad the joint was tested by using environment-friendly Pb-free solder alloy Sn-4Ag of electronic components. Pb eutectic alloy (Sn-37Pb) joints limited to environmental issues with reflow time (10sec, 30sec, 100sec, 300sec) according to two types of solder alloy joints are compared and evaluated by creep strain rate, rupture time and IMC (Intermetallic Compound) behavior. As the results, reflow time increases with increasing thickness of IMC can be seen at overall 100sec later in case of two solder joints on the IMC thickness of Sn-4Ag solder joints thicker than Sn-37Pb solder joints. In addition, when considering creep evaluation factors, lead-free solder alloy Sn-4Ag has excellent creep resistance more than Pb eutectic alloy. For this reason, the two solder joints, such as in the IMC (Cu6Sn5) was formed. However, the creep resistance of Sn-4Ag solder joints was largely increased in the precipitation strengthening effect of dispersed Ag3Sn with interface more than Sn-37Pb solder joints.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.9
• /
• pp.623-627
• /
• 1999

We report a new in-situ fluorine passivation method without in implantation by employing excimer laser annealing of $SiO_{x}F_{y}$/a-Si structure and its effects on p-channel poly-Si TFTs. The proposed method doesn't require any additional annealing step and is a low temperature process because fluorine passivation is simultaneous with excimer-laser-induced crystallization. A in-situ fluorine passivation by the proposed method was verified form XPS analysis and conductivity measurement. From experimental results, it has been shown that the proposed method is effective to improve the electrical characteristics, specially field-effect mobility, and the electrical stability of p-channel poly-Si TFTs. The improvement id due to fluorine passivation, which reduces the trap state density and forms the strong Si-F bonds in poly-Si channel and $SiO_2/poly-Si$ interface. From these results, the high performance poly-Si TFTs canbe obtained by employing the excimer-laser-induced fluorine passivation method.

• Ocean and Polar Research
• /
• v.38 no.2
• /
• pp.129-137
• /
• 2016

This study aimed to isolate and characterize sulfated polysaccharides (SPs) from Iridaea cordata and evaluate their anticancer activity. SPs of the Antarctic red seaweed were obtained by $CaCl_2$ (SP1) and ethanol precipitations (SP2) following diluted acid extraction at room temperature. Yields of SP1 and SP2 were approximately 14% and 23%, respectively, of the dry weight of red seaweed. The average molecular mass of the SP1 and SP2 was estimated about $1.84{\times}10^3$ and $1.42{\times}10^3kDa$, respectively, by size-fractionation High-Performance Liquid Chromatography (HPLC). From the High-Performance Anion-Exchange Chromatography-Pulsed Amperometric Detection (HPAEC-PAD) analysis, the main monosaccharide was galactose with glucose and fucose as minor components. The sulfate content of SP2 (40.4%) was slightly higher than that of SP1 (33.8%). The FT-IR spectra also showed characteristic band of carrageenan-like sulfated polysaccharides. Taken together the SPs are thought to be carrageenan-like sulfated galactan. The polysaccharides (SPs) from I. cordata exhibited weak antitumor activity against PC-3 (prostate cancer), HeLa (cervical cancer), and HT-29 (human colon adenocarcinoma). To our knowledge, this is the first data on biological activity of the Antarctic red seaweed I. cordata.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.30-36
• /
• 2005

Recently, It has been reported that the spin sprayed ferite film shows better magnetic properties at high frequeny that the ferrite by co-firing over $800^{\circ}C$ . Besides, there is no limitation to select the substrate materials because it can be processed with relatively low temperature below $100^{\circ}C$. Therefore, we fabricated film inductor as a passive device for DC-DC converter by a use of spin sprayed embedded form was completed by via hole process of pad opening. Saturation magnetization of 0.61 T and real part of permeability of 110 were obtained in Ni-Zn ferrite. In addition, inductance of 1.52 ${\mu}H$, quality factor of 24.3 at 5 MHz were measured with spiral 16 turn inductor. The rated current of inductor was 863 mA.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.314-327
• /
• 2009

Weather launch criteria of launch at Oenarodo Space Center is important for the successful launch operation. In particular, most of the launch failure occurs during the period of separation from the launch pad, thus meteorological condition is critical at this phase. In earlier days, the weather launch criteria adopted wind and forecast data for the launch operation. Nevertheless, the control of position and stability require other meteorological components such as vertical wind shear, lightning, temperature and visibility, because the launch vehicle is moving mostly vertically. We analyze these meteorological components by using the observed data at KMA at neighboring Oenarodo to determine the weather launch criteria. These criteria need further refinements through long-term observation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1267-1271
• /
• 2009

In this paper, a diplexer circuit to separate GSM from CDMA band is designed using a LTCC (Low Temperature Cofired Ceramic) multi-layer technology. In order to increase a integration capability of the diplexer, it is designed using 3-dimensional (3-D) multi-layer compact inductor and capacitors in e-layer LTCC substrate with a relative dielectric constant of 7. In order to achieve high selectivity of the bands, a shunt capacitor and inductor are designed in the high-pass filter (HPF) and low-pass filter (LPF), respectively. The size of the fabricated diplexer including CPW pads is 3,450 ${\times}$4,000 ${\times}$694 ${\mu}m^3$An insertion loss (IL) and return loss in GSM band are less than -1.35dB and more than -5.66dB,respectively. In the case of CDMA band, the IL of -1.54dBandRLof above -9.30dBare archived.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.45-56
• /
• 2019

As a result of analyzing the quality of imported grapes during the 2018 season, the hardness of the grape berry was found to be 10 N or less in total. In the case of Chilean grapes, the soluble solids tended to be lower as imports and distribution periods were delayed. The berry weight was the largest at 14.4 - 14.8 g for the 'Red Globe', 7.1 - 7.4 g for the 'Thompson Seedless' and 6.0 - 7.0 g for the 'Crimson Seedless'. The 'Crimson Seedless' grapes imported from Chile, which had a high berry shatter rate, had a shorter pedicel length, pad width and brush length than that of the other 2 varieties. Regardless of the grape varieties, the weight loss during the distribution at room temperature ($25^{\circ}C$) increased rapidly as the import season was delayed. Additionally, it was found that the later the distribution seasons, a higher stem browning index was observed regardless of the variety. The 'Thompson Seedless' was revealed to be more susceptible to browning than that of the other varieties. The shrinkage of the stem and the pedicel browning progressed within a short time during shelf-life as the distribution time was delayed. The incidence of berry decay of the imported grapes tended to increase with the progression of the distribution period. In the fruits distributed on April, except for the 'Crimson Seedless', the grapes were rapidly corrupted in the second half of the distribution. The 'Red Globe' grapes completely lost marketability due to a berry decay of 26.1% and 69.9% at 9 and 12 days after shelf-life, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.481-486
• /
• 2006

There are attempts to utilize Hanji for apparel material, but, the reason that the strength and durability of Hanji decrease to a great extent in the wet condition, restricts the usability of Hanji. In order to improve the resistance against water, Hanji was treated with silicone type water repellent agents. The treatment was carried out by conventional pad-dry-cure method. The optimum treatment condition was obtained by varying the concentration of repellent agent, curing temperature and time. Water repellency was tested by spray rating method. Wet and dry tensile strength, tearing resistance and abrasion resistance were examined after the treatment. Flexural stiffness and wrinkle recovery angles of hanji were also measured. In result, the optimum condition of treatment was at resin concentration of 40g/l, catalyst concentration of 20g/l(half of resin concentration), curing temperature of 160$^{circ}C$, curing time of 120 sec. Flexural stiffness of Hanji was hardly increased and wrinkle recovery angle of Hanji was improved a little by resin treatment. After the treatment, in dry condition, tensile strength and tearing resistance were little changed but abrasion resistance was improved. In wet condition, tensile strength, tearing strength and abrasion resistance were improved.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.23-29
• /
• 2006

Ultrasonic soldering of Si-wafer to FR-4 PCB at ambient temperature was investigated. The UBM of Si-substrate was Cu/ Ni/ Al from top to bottom with thickness of $0.4{\mu}m,\;0.4{\mu}m$, and $0.3{\mu}m$ respectively. The pad on FR-4 PCB comprised of Au/ Ni/ Cu from top to bottom with thickness of $0.05{\mu}m,\;5{\mu}m$, and $18{\mu}m$ respectively. Sn-3.5wt%Ag foil rolled to $100{\mu}m$ was used for solder. The ultrasonic soldering time was varied from 0.5 s to 3.0 s and the ultrasonic power was 1,400 W. The experimental results show that a reliable bond by ultrasonic soldering at ambient temperature was obtained. The shear strength increased with soldering time up to a maximum of 65 N at 2.5 s. The strength decreased to 34 N at 3.0 s because cracks were generated along the intermetallic compound between Si-wafer and Sn-3.5wt%Ag solder. The Intermetallic compound produced by ultrasonic soldering between the Si-wafer and the solder was $(Cu,Ni)_{6}Sn_{5}$.