• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.115-121
• /
• 2017

Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.1-7
• /
• 2010

본 연구에서는 $430^{\circ}C$에서 Bi-10Cu-20Sb-0.3Ni 조성의 솔더 합금과 Cu간의 리플로루 솔더링 시 생성되는 계면 반응층을 분석하였고, 솔더링 시간에 따른 계면 반응층의 성장 속도를 측정하였다. 리플로우 솔더링 후 Bi-10Cu-20Sb-0.3Ni/Cu의 계면 반응층을 분석한 결과, $(Cu,Ni)_2Sb$ 및 $Cu_4Sb$ 금속간 화합물층, 그리고 Bi 조성과 $Cu_4Sb$ 상이 주기적으로 존재하는 아지랑이 형상층이 연속적으로 생성되었다. 또한 120 s까지의 솔더링 시간 영역에서는 계면 반응층의 총 두께가 솔더링 시간에 대해 직선적으로 증가하는 경향이 관찰되었다. 합금원소로 첨가된 Ni은 가장 두꺼운 $Cu_4Sb$ 반응층의 형성에 참여하지 않아 계면 금속간 화합물의 성장 속도를 억제시키는 작용을 나타내지 못했다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.307-310
• /
• 2010

Ubiquitous 사회에서 기본 인프라를 구축하는 전력 공급망과 전력기기의 안전은 중요하다. U-City의 재난을 방지하기 위하여 U-IT전력기기의 모듈별 성능평가와 보안은 U-City 안전을 위해 꼭 필요하다. 본 논문에서는 U-IT전력기기의 모듈에 온도센서, 습도센서, 화재센서들을 탑재한 수배전반, 홈 분전반, Home Network Wall-Pad, 차단기, MPNP 블랙박스, 아크 검출기, 아크 안전기, 아울렛의 모듈별 성능평가와 보안방법을 연구한다. U-IT전력기기들은 센서의 정보들을 전달 및 분석하여 위험성을 사전 예방하여 안전성을 확보하고, 접근 제어, 인증 등 보안대책으로 U-IT 전기안전통합관리시스템의 보안성을 강화시켜, 안전성과 보안성을 갖춘 U-City건설과 운영에 기여하게 될 것이다.

• 농업과학연구
• /
• 제48권2호
• /
• pp.241-250
• /
• 2021

This investigation assessed the berry quality after two months of low-temperature storage (3 ± 1℃) of 'Shine Muscat' grapes, which were treated with CPPU (N-[2-chloro-4-pyridyl]-N'-phenylurea) or TDZ (1-phenyl-3-[1,2,3-thiadiazol-5-yl] urea) in combination with gibbrellic acid (GA₃). The berry shatter rate was the lowest (1%) in 4 cm + CPPU treatment, while it was the highest (2.4%) in 3 cm floral length treated with CPPU. On the other hand, the 4 cm + TDZ treatment resulted in a shatter rate of 2.0%, which was twice as high as that observed after 4 cm + CPPU treatment. The 4 cm + TDZ treatment resulted in a 5.5% berry decay rate, which was the highest among all treatments. Alternatives to using a sulfur dioxide (SD) pad to maintain the quality of 'Shine Muscat' grapes, namely, using ethylene scrubbers (ESs, 3 g × 2 sachet) and alcohol releasers (ARs, 2 g × 2 sachet) in a 2 kg carton package for export, were explored in this study. The berry shatter rate with ES treatment (1.0%) was found to be comparable to that with SD treatment (0.6%) during three months of cold storage. Regarding the berry decay rate, that of the untreated control surged to 36.0% in the three months of storage, followed by 19.9% and 15.5% in samples subjected to AR and ES treatments respectively. Compared with the untreated control, the samples subjected to SD treatment showed a decay rate of 2.2%, which was the most effective in reducing berry decay by 95%. These results demonstrated that SD pad treatment of 'Shine Muscat' grapes was the most effective method of maintaining berry quality, and ES treatment partially reduced the berry shatter and berry decay rates.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2206-2208
• /
• 2003

This paper is performed to find the effects on body heat by stimulating the skin with the heat of a moxibustion cauterizer and the Artemisia-lotion which cause the extension of the blood vessel. The Artemisia-lotion is made by extracting the vasodilator and antioxidant compounds from the $Artemisia-CH_2Cl_2$ fraction. The moxibustion cauterizer is constructed with a DC power supply and 3 heating electrodes with PTC(Positive Temperature Coefficients) thermistor. The stimulation temperature level of the moxibustion cauterizer is $45^{\circ}C\;-48^{\circ}C$. We gave the subjects the following stimulating conditions; only heat stimulation, only Artemisia -lotion stimulation, and both stimulations. The measurement of body heat was performed with a infrared thermography system . Finally we could estimate the effects of a betterment of circulation of the blood from $Artemisia-CH_2Cl_2$ fraction.

• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.149-154
• /
• 2006

This paper presents the braking friction and wears on the rubbing surfaces of a friction pad-disk brake. In this study, four friction disk specimens are sampled from unused and used disks in which are taken from the disk brake system when the friction induced vibration and noise problems have been occurred during a braking period at a running period of 10,000 km, 20,000 km, and 30,000 km in random. The experimental results indicate that the tribological characteristics of an unused disk brake shows equal and stable as a friction coefficient and temperature distributions during a braking friction/wear test period including a total friction mode from the start to running periods. But the used disk brake shows unstable and uneven friction modes between an outside and inside rubbing surfaces of a disk brake in terms of a friction coefficient and wears. This may lead to a friction induced friction vibration and noise problems of a used disk brake.

• Tribology and Lubricants
• /
• 제12권4호
• /
• pp.18-27
• /
• 1996

An interlaboratory wear testing was performed in order to understand the friction behaviors and the wear mechanisms of the sintered composites. The specimens were the sintered bronze matrix composites having various contents of friction additives, friction control agents and reinforcements. The variation of the wear characteristics according to the constituents of the composites as well as the wear conditions was investigated by SEM, EPMA, OM, the hardness testing and the measurement of friction. The specimen having glass fiber as the matrix reinforcement showed a remarkable increase in wear resistance as increasing the content of glass fiber. Graphite particles in the composites exhibited the lubricating effect and also resulted in the lowering strength of the matrix. Addition of Mo powder to the composites led to the deterioration of wear properties at the room temperature, however, an enhanced wear properties were obtained in the containing Mo at an elevated temperature.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.90-96
• /
• 2014

The conventional SnPb solders were widely used for several decades in the electronic packing system due to the superior mechanical properties such as low melting point, better wettavility and good mechanical fatigue. However, in recent years, owing to adverse effect on the human health and environment, conventional SnPb solders have been replaced by Lead-free solders. In this research, the shear punch(SP) test of Sn-4Ag-(Cu)/Ni pad was performed. Pb-free solder alloys which are the environmentally friendly of the electronic components were performed at $150^{\circ}C$ for 100hr~1000hr to artificial aging processing. In order to evaluate the mechanical properties of solder joints, the SP test was conducted at $30^{\circ}C$ and $50^{\circ}C$. As a result, the maximum shear strength of almost the whole specimens was decreased with the increase in aging time and temperature of SP test. The mechanical properties of Sn-4Ag-0.5Cu solder were most excellent in all Pb-free solder which were produced by the SP test at $30^{\circ}C$.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.471-479
• /
• 2016

Cross-drilling and slotting on the frictional surface of a brake rotor are methods used for improving the performance of the brake system. These shapes have particular advantages, such as the shaving effect of a slotted shape, which maintains a clean pad-to-rotor contact surface, and the venting effect of a drilled shape, which provides passageways for the gas to escape. In order to understand the effect of the machined pattern on the brake performance aspect, an experimental method is adopted along with the dynamometer test. The cross-drilled rotor, slotted rotor, and mixed pattern rotor with cross-drilling and slotting machining are prepared and tested in terms of friction coefficient, temperature, braking torque, and noise.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.95-98
• /
• 2011

Recently, there is a growing tendency that fine-pitch electronic devices are increased due to higher density and very large scale integration. Finer pitch printed circuit board(PCB) is to be decrease insulation resistance between circuit patterns and electrical components, which will induce to electrical short in electronic circuit by electrochemical migration when it exposes to long term in high temperature and high humidity. In this research, the effect of soldering flux acting as an electrical carrier between conductors on electrochemical migration was investigated. The PCB pad was coated with OSP finish. Sn3.0Ag0.5Cu solder paste was printed on the PCB circuit and then the coupon was treated by reflow process. Thereby, specimen for ion migration test was fabricated. Electrochemical migration test was conducted under the condition of DC 48 V, $85^{\circ}C$, and 85 % relative humidity. Their life time could be increased about 22% by means of removal of flux. The fundamentals and mechanism of electrochemical migration was discussed depending on the existence of flux residues after reflow process.