• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.125-134
• /
• 2009

The purpose of this study is to analyze the formative characteristics of power-shoulder jacket shown in 08/09 F/W and 09/10 F/W London, Paris, Milan, New York collection and extract main expression words for development of semantic differential scales of visual image according to the change in shoulder angle and width of power-shoulder jacket. The result of this study is as follows. Power-shoulder jacket which were worn by 1980 business women have similar cutting with men's suit jacket, but have characteristics of exaggerating the body figure as exaggerated shoulder with pad and tight waist like an inverted triangle silhouette. Power-shoulder jackets shown in collections used glossy and glittering material and dark colors and formed slim silhouette with matches of shoulder line of temperate senses and casual wear. Like this, the power-shoulder jacket was expanded to daily casual wear from traditional formal wear. Main expression words of visual image of jackets according to the changes in angle and width of shoulder differ greatly depending on the expansion degree of angle and width of shoulder. Changes in shoulder angle may look tense, stiff and too much according to the amount of changes. However, it also has the image of sharp but dignified and charismatic. Also, it helps to show body figure more efficiently like being slim and looking taller. Related to the current trend emphasizing shoulder among women, it is evaluated to be stylish and trendy. When the expansion degree is not too much, changes in shoulder width partly show slim and slender waist under the influence of wider shoulder with basic tailored jacket image. However, when the expansion degree is enlarged, image related to the body figure is more definite compared to other visual images.

• The Journal of Korean Physical Therapy
• /
• v.24 no.3
• /
• pp.202-207
• /
• 2012

Purpose: The purpose of this study was to determine the effect of monochromatic infrared energy (MIRE) on the blood flow of the superficial radial artery and local skin temperature in healthy subjects. Methods: Forty healthy volunteers were recruited and randomly assigned to MIRE group (n=20) and placebo group (n=20). The MIRE group received a 890 nm MIRE irradiation on the forearm using two therapy pads for 30 minutes. The therapy pad was composed of an array of 60 diodes. MIRE unit was set at bar 8, that corresponds to a diode power of 10 mW and a power density of $63mW/cm^2$. The placebo group received sham MIRE. Peak blood flow velocity (PBFV), mean blood flow velocity (MBFV), and skin temperature (ST) were measured pre- and post-MIRE irradiation. Results: There was a significant difference in PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) between the pre- and post-treated values in the MIRE group. In contrast, no significant difference was found between the pre- and post-treated values in the placebo group. There was significant difference in mean change values from baseline of PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) between the MIRE group and the placebo group. There was a significant increase in PBFV (p<0.001), MBFV (p<0.001), and ST (p<0.001) following MIRE irradiation. Conclusion: The arterial blood flow and local skin temperature of the forearm in the healthy subjects were significantly increased following MIRE irradiation.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.157-165
• /
• 2007

This study was designed to evaluate the effects of fructose(F) or sucrose(S) and guar gum intake on carbohydrate and lipid metabolism in 15-week-old male Goto-Kakizaki(GK) rats. Fifty rats were randomly assigned to 5 groups which were different in carbohydrate(25% of carbohydrate) and fiber(5% w/w) sources. The carbohydrate(CHO) sources of each group were comstarch(control group, 100% of CHO), fructose with cellulose(F), fructose with guar gum(FG), sucrose with cellulose(S), and sucrose with guar gum(SG). Each group was fed exterimental diet for 4 weeks. We measured food intake, body weight gain, adipose tissues weight and organs weight. We conducted oral glucose tolerance test(OGTT) and measured plasma insulin concentration to examine carbohydrate metabolism. To evaluate lipid metabolism, we measured the lipid profile of plasma, liver and feces. Food intake and weight gain of FG or SG groups tended to be less than those of F or S groups. Perirenal and epididymal fat pad weights of SG group were significantly lower than those of S group and those of FG group tended to be lower than those of F group. In OGTT, blood glucose values of F or S groups were significantly higher than those of C group, and FG or SG groups tended to be lower than those of F or S groups during the experimental time. The area under the curve(AUC) of C group was significantly highest among the groups, AUC and plasma insulin concentration of FG or SG groups tended to be lower than those of F or S groups. Plasma and hepatic triglyceride (TG) of FG and SG groups were significantly lower than those of F and S groups, plasma and hepatic total lipid(TL) and total cholesterol(TC) of FG and SG groups tended to be lower than those of F and S groups. Fecal TL, TG and TC of FG or SG groups tended to be higher than those of F and S groups. In conclusion, intake of guar gum should improve carbohydrate and lipid metabolism in partial substitution of fructose or sucrose for cornstarch in GK rats.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.845-853
• /
• 2015

The objective of this study was to predict the timing of nitrogen (N) demand through analyzing chlorophyll fluorescence (ChlF), soil-plant analysis development (SPAD), and normalized difference vegetation index (NDVI), which are positively correlated with foliar N concentration in star cluster (Pentas lanceolata). The plants were grown in potting soil under optimal conditions for 30 d, followed by weekly irrigation with five concentrations (0, 4, 8, 16, and 24 mM) of N for an additional 30 d. These five N application levels corresponded to leaf N concentrations of 2.62, 3.48, 4.00, 4.23, and 4.69%, respectively. We measured 13 morphological and physiological parameters, as well as the responses of these parameters to various N-fertilizer treatments. The general increases in Dickson's quality index (DQI), above-ground dry weight (DW), total DW, flowering rate, ${\Delta}F/Fm$', and qP in response to treatment with 0 to 8 mM N were similar to those of SPAD, NDVI, and Fv/Fm. Consistent and strong correlations ($R^2$= 0.60 to 0.85) were observed between leaf N concentration (%) and SPAD, NDVI, ${\Delta}F/Fm$', and above-ground DW. Validation of leaf S PAD, NDVI, and ${\Delta}F/Fm$' revealed that these vegetation indices are accurate predictors of leaf N concentration that can be used for non-destructive estimation of the proper timing for N-solution irrigation of P. lanceolata. Moreover, irrigation with 8 mM N-fertilizer i s recommended w hen leaf N concentration, SPAD, NVDI, and ${\Delta}F/Fm$' ratios are reduced from their saturation values of 4.00, 50.68, 0.64, and 0.137%, respectively.

• Tribology and Lubricants
• /
• v.30 no.1
• /
• pp.29-35
• /
• 2014

The temperature-dependent tribological properties of brake discs for a train were examined in this study. The discs were produced using heat-resistant alloy steel, which showed different thermal conductivity after the heat treatments. A commercial brake friction material was used to evaluate the friction effectiveness, and the friction tests were carried out using a 1/5 scale dynamometer under various initial braking temperature conditions. The results showed that the tribological property of the disc was strongly affected by the heat treatment schedule. At low temperatures (below $250^{\circ}C$), the friction coefficient increased as a function of disc temperature, indicating that frictional heat increased the adhesion between the disc and pad. In addition, fade was observed at high temperatures (above $250^{\circ}C$); it was pronounced in the case of the disc with low thermal conductivity. The different fade resistances observed in the discs with different heat treatment schedules appear to be influenced by microstructural changes such as carbide redistribution occurring during the heat treatments, which affected the thermal conductivity.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.23-29
• /
• 2006

Ultrasonic soldering of Si-wafer to FR-4 PCB at ambient temperature was investigated. The UBM of Si-substrate was Cu/ Ni/ Al from top to bottom with thickness of $0.4{\mu}m,\;0.4{\mu}m$, and $0.3{\mu}m$ respectively. The pad on FR-4 PCB comprised of Au/ Ni/ Cu from top to bottom with thickness of $0.05{\mu}m,\;5{\mu}m$, and $18{\mu}m$ respectively. Sn-3.5wt%Ag foil rolled to $100{\mu}m$ was used for solder. The ultrasonic soldering time was varied from 0.5 s to 3.0 s and the ultrasonic power was 1,400 W. The experimental results show that a reliable bond by ultrasonic soldering at ambient temperature was obtained. The shear strength increased with soldering time up to a maximum of 65 N at 2.5 s. The strength decreased to 34 N at 3.0 s because cracks were generated along the intermetallic compound between Si-wafer and Sn-3.5wt%Ag solder. The Intermetallic compound produced by ultrasonic soldering between the Si-wafer and the solder was $(Cu,Ni)_{6}Sn_{5}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.149-156
• /
• 2018

Objective: Broilers show clear preference towards red color light (RL). However setting of an optimum light intensity is difficult since dim intensities that favor growth reduce welfare. This experiment was conducted to test the most effective RL intensity regimen (Dim [5 lux; DI] vs high [320 lux; HI]) in combination applied at different growth stages that favors for both performance and welfare. Methods: Complete randomize design was adopted with 6 replicates. Treatments were; T1 = early DI (8-21 d)+latter HI (22-35 d); T2 = early DI (8-28 d)+latter HI (29-35 d), T3 = early HI (8-21 d)+latter DI (22-35 d), T4 = early HI (8-28 d)+latter DI (29-35 d) and T5 = control (white light; WT) (8-35 d) at medium intensity (20 lux). Body weight (BW), weight gain (WG), water/feed intake and ratio, feed conversion ratios (FCR) were assessed. Common behaviours (15) were recorded by scan sampling method. Lameness, foot pad dermatitis, breast blisters, hock burning damage were assessed as welfare parameters. Fear reactions were tested using Tonic Immobility Test. Ocular and carcass evaluations were done. Meat and tibiae were analyzed for fat and bone ash respectively. Results: On 35 d, the highest BW ($2,155.72{\pm}176g$), WG ($1,967.78{\pm}174g$) were recorded by T2 compared to WT ($BW_{WT}=1,878.22{\pm}155$, $WG_{WT}=1,691.83{\pm}160$). But, application of RL, either DI, or HI during early/latter stage had no significant effect on FCR. Under HI, birds showed much higher active behaviours. DI encourages eating. Though LI changed from DI to HI, same trend could be seen even under HI. The highest leg strength ($218.5{\pm}120s$) was recorded by T2. The lowest leg strength ($64.58{\pm}33s$) and the highest ocular weight ($2.48{\pm}1g$) were recorded by T1. Significantly (p<0.05) the highest skin weight ($162.17{\pm}6g$) but the lowest fat% in meat ($13.03%{\pm}5%$) was recorded by T2. Conclusion: Early exposure to DI-RL up to 28 days followed by exposure to HI-RL is the most favorable lighting regimen for optimizing production, better welfare of broilers and improving health benefits of meat.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.61-64
• /
• 2000

We fabricated and characterized Low Noise Amplifier (LNA) using MCM-C (Multi-Chip-Module-Cofired) technology for 2.14 GHz IMT-2000 mobile terminal application. First, We designed LNA circuits and simulated it's high frequency characteristics using circuits simulator. For the simulation, we adopted high frequency libraries of all the devices used in LNA samples. By the simulation, Gain was 17 dB and Noise Figure was 1.4 dB. We used multilayer process of LTCC (Low Temperature Co-fired Ceramics) substrate and conductor, resistor pattern for the MCM-C LNA fabrication. We made 2 buried inductors, 2 buried capacitors and 3 buried resistors. The number of the total layers was 6. On the top layer, we patterned microstrip line and pads for the SMT device. We measured the high frequency characteristics, and the results were 14.7 dB Gain and 1.5 dB Noise Figure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.277-277
• /
• 2011

디스플레이의 기술발전에 의해 대면적 고해상도의 LCD가 제작되어 왔다. 이에 따라 LCD 점등검사를 위한 Probe Unit의 기술 또한 급속도로 발전하고 있다. 고해상도에 따라 TFT LCD pad가 미세피치화 되어가고 있으며, panel의 검사를 위한 Probe 또한 30 um 이하의 초미세피치를 요구하고 있다. 따라서, 초미세 pitch의 LCD panel의 점등검사를 위한 Probe Unit의 개발이 시급하가. 본 연구에서는 30 um 이하의 미세피치의 Probe block을 위한 Slit wafer의 식각 공정 조건을 연구하였다. Si 공정에서 식각율과 식각깊이에 따른 profile angle의 목표를 설정하고, 식각조건에 따라 이 두 값의 변화를 관측하였다. 식각실험으로 Si DRIE 장비를 이용하여, chamber 압력, cycle time, gas flow, Oxygen의 조건에 따라 각각의 단면 및 표면을 SEM 관측을 통해 최적의 식각 조건을 찾고자 하였다. 식각율은 5um/min 이상, profile angle은 $90{\pm}1^{\circ}$의 값을 목표로 하였다. 이 때 최적의 식각조건은 Etching : SF6 400 sccm, 10.4 sec, passivation : C4F8 400 sccm, 4 sec의 조건이었으며, 식각공정의 Coil power는 2,600 W이었다. 이러한 조건의 공정으로 6 inch Si wafer에 공정한 결과 균일한 식각율 및 profile angle 값을 보였으며, oxygen gas를 미량 유입함으로써 식각율이 균일해짐을 알 수 있었다. 결론적으로 최적의 Slit wafer 식각 조건을 확립함으로써 Probe Unit을 위한 Pin 삽입공정 또한 수율 향상이 기대된다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.1052-1059
• /
• 2016

Red light (RL) marked higher weight gain (WG) and preference of broilers compared to other light colors. This study aimed to investigate how different intensities of RL affect the performance, behavior and welfare of broilers. RL treatments were T1 = high intensity (320 lux), T2 = medium intensity (20 lux); T3 = dim intensity (5 lux), T4 = control/white light at (20 lux) provided on 20L:4D schedule and T5 = negative control; 12 hours dark: 12 hours day light. Cobb strain broilers were used in a Complete Randomize Design with 6 replicates. WG, water/feed intake, feed conversion ratio (FCR), mortality, behavior and welfare were assessed. At 35 d, significantly (p<0.05) highest body weight ($2,147.06g{\pm}99$) was recorded by T3. Lowest body weight ($1,640.55g{\pm}56$) and FCR (1.34) were recorded by T5. Skin weight was the only carcass parameter showed a significant (p<0.05) influence giving the highest (56.2 g) and the lowest (12.6 g) values for T5 and T1 respectively. Reduced welfare status indicated by significantly (p<0.05) higher foot pad lesions, hock burns and breast blisters was found under T3, due to reduced expression of behavior. Highest walking ($2.08%{\pm}1%$) was performed under T1 in the evening during 29 to 35 days. Highest dust bathing ($3.01%{\pm}2%$) was performed in the morning during 22 to 28 days and highest bird interaction (BI) ($4.87%{\pm}4%$) was observed in the evening by T5 during 14 to 21 days. Light $intensity{\times}day$ $session{\times}age$ interaction was significantly (p<0.05) affected walking, dust bathing and BI. Light intensity significantly (p<0.05) affected certain behaviors such as lying, eating, drinking, standing, walking, preening while lying, wing/leg stretching, sleeping, dozing, BI, vocalization, idling. In conclusion, birds essentially required provision of light in the night for better performance. Exposed to 5 lux contributed to higher WG, potentially indicating compromised welfare status. Further researches are suggested to investigate RL intensity based lighting regimen that favors for both production and welfare of Broilers.