• 농업과학연구
• /
• 제48권2호
• /
• pp.241-250
• /
• 2021

This investigation assessed the berry quality after two months of low-temperature storage (3 ± 1℃) of 'Shine Muscat' grapes, which were treated with CPPU (N-[2-chloro-4-pyridyl]-N'-phenylurea) or TDZ (1-phenyl-3-[1,2,3-thiadiazol-5-yl] urea) in combination with gibbrellic acid (GA₃). The berry shatter rate was the lowest (1%) in 4 cm + CPPU treatment, while it was the highest (2.4%) in 3 cm floral length treated with CPPU. On the other hand, the 4 cm + TDZ treatment resulted in a shatter rate of 2.0%, which was twice as high as that observed after 4 cm + CPPU treatment. The 4 cm + TDZ treatment resulted in a 5.5% berry decay rate, which was the highest among all treatments. Alternatives to using a sulfur dioxide (SD) pad to maintain the quality of 'Shine Muscat' grapes, namely, using ethylene scrubbers (ESs, 3 g × 2 sachet) and alcohol releasers (ARs, 2 g × 2 sachet) in a 2 kg carton package for export, were explored in this study. The berry shatter rate with ES treatment (1.0%) was found to be comparable to that with SD treatment (0.6%) during three months of cold storage. Regarding the berry decay rate, that of the untreated control surged to 36.0% in the three months of storage, followed by 19.9% and 15.5% in samples subjected to AR and ES treatments respectively. Compared with the untreated control, the samples subjected to SD treatment showed a decay rate of 2.2%, which was the most effective in reducing berry decay by 95%. These results demonstrated that SD pad treatment of 'Shine Muscat' grapes was the most effective method of maintaining berry quality, and ES treatment partially reduced the berry shatter and berry decay rates.

• 대한토목학회논문집
• /
• 제31권2B호
• /
• pp.187-192
• /
• 2011

질산성 질소는 대표적인 지하수 오염물질로써 우리나라를 비롯한 여러 국가들이 음용수 중의 질산성 질소 농도를 WHO 권고기준인 10 mg/L as N 이하로 규제하고 있다. 본 연구에서는 처리하고자 하는 물질과의 접촉면적을 극대화 시켜줄 수 있는 영가철 충진 복극전해조를 이용하여 지하수 중의 질산성 질소를 처리하기 위해 다양하게 실험조건을 변화시켜 최적의 효율을 얻고자 하였다. 실험결과로서 영가철을 환원제로 사용할 때, 질산성 질소는 산성조건에서 좋은 제거효율을 보여주었으며, 산성조건을 유지시켜주지 않았을 때 암모니아성 질소로 환원되는 과정에서 수산화기 발생으로 pH가 증가하여 환원반응에 필요한 수소이온이 감소함으로 효율이 점차 감소하는 문제가 발생하였다. 복극전해조에서, 영가철과 주문진규사의 충진비는 0.5~1:1에서 제거효율이 가장 좋았으며 이는 각각의 영가철 입자가 미세전극으로 작용했기 때문이라고 판단된다. 충진비 2:1 이상에서는 점진적인 침전물의 형성 및 clogging의 가속화로 제거효율이 감소하였다. 인가전압이 상승할수록 제거효율이 높아졌으나 반응기 내 bypass current가 증가하는 것으로 확인되었으며 소비되는 전력량이 비례 이상으로 증가하였다. 본 실험에서는 최적 인가전압을 50 V로 결정하였고 그 때 질산성 질소를 94.9% 제거할 수 있었다.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.331-340
• /
• 2000

기존의 2상 생물학적 유동상은 산소 공급의 한계 및 유동 분산판 폐쇄 등의 문제점을 가지고 있다. 이러한 문제를 해결하기 위하여 3상의 선회류 유동상을 고안하여 그 운전특성을 연구하였다. 합성 폐수의 평균 TOC농도는 약 $70mg/{\ell}$($62{\sim}84mg-TOC/{\ell}$)이었고, HRT는 1.6시간, 평균입경이 0.397 mm인 모래의 충전량을 200에서 $600m{\ell}/{\ell}$까지 단계적으로 변화시키며, 미생물의 농도 및 처리 수질을 측정하였다. 실험 결과 기존 유동상 반응기의 분산장치의 폐색과 산소공급의 제한 등 연속운전에 지장을 주는 단점을 보완할 수 있었다. 실험 기간 중에 반응조의 DO의 농도는 $3mg/{\ell}$이상을 유지할 수 있었으며, TOC 제거율은 91~94 %, MLVSS농도는 $2,360{\sim}3,860mg/{\ell}$, F/M 비는 $0.59{\sim}1.04kg-TOC/kg-MLVSS{\cdot}day$, 생물막의 두께는 $35{\sim}71{\mu}m$, Media-g당 MLVSS는 8.4~17.3 mg/g, 그리고 슬러지 발생량은 $1.08{\sim}2.35kg-SS/m^3{\cdot}day$의 변화를 보였다. 충전량에 따른 MLVSS농도 변화를 분석한 결과 충전량이 $400{\sim}450m{\ell}/{\ell}$일 때 MLVSS농도를 가장 높게 유지할 수 있었고, Media-g당 MLVSS농도 측면에서는 충전량이 $250m{\ell}/{\ell}$일 때 가장 높은 농도를 유지할 수 있었다. 유출수의 SS는 $350{\sim}450m{\ell}/{\ell}$에서 낮게 나타났다. 적정 처리효율에서 F/M 비가 낮고, 슬러지 발생량이 적은 최적조건에서의 생물막의 두께는 약 $54{\mu}m$, g-Media당 MLVSS의 농도는 13 mg이였으며, 충진량은 $350{\sim}400m{\ell}/{\ell}$(35~40%)임을 알 수 있었다. 최적 충전 상태에서 광학 현미경으로 Media를 관찰할 때 Epistylis sp.의 고착성미생물을 일부 관찰할 수 있었으며, Media 표면을 전자현미경으로 촬영한 결과 구균류가 부착 성장하는 것을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.205-208
• /
• 2007

We injection molded a thin plate with micro prism patterns on its surface and investigated the fidelity of replication of the micro pattern depending on the process parameter such as mold temperature, injection rate or packing pressure. The size of the $90^{\circ}$ prism pattern is $50{\mu}m$ and the size of the plate is $400mm{\times}400mm$. The thickness is 1mm. The fidelity of the replication turned out quite different according to the process parameters and location of the patterns of the plate. We measured the cavity pressure and temperature in real-time during the molding to analyze the effect of the local melt pressure and temperature on the micro pattern replication.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.264-268
• /
• 2003

Recently reduction of industrial products in size and weight has been increased by application of micro-drills in gadgets of high precision and a great interest of a micro-drilling has been raised. Due to the lack of tool stiffness and the chip packing, the micro-drilling requires not only the robust tool structure which has not affected by vibration but also effective drilling methods designed to prevent tool fracture from cutting troubles. This paper presents an optimum design shape of a 0.15 mm micro-drill associated with a new manufacturing process to improve the production rate and to lengthen the tool life and suggestions on the micro-drilling characteristic properties associated with the tool life and workpiece quality.

• 소성∙가공
• /
• 제17권7호
• /
• pp.486-490
• /
• 2008

This study demonstrates that preloading via the elastostatic compression imposed on amorphous alloys at room temperature induces homogeneous plastic strain associated with structural disordering. This structural disordering causes disorder, which at room temperature creates excess free volume and in turn enhances the plasticity. In this study, we investigated the effects of various parameters, such as stress level, flow rate and preloading time, on the degree of the structural disordering at room temperature. On the basis of the present findings, we proposed a method of enhancing the plasticity of amorphous alloys.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.109-116
• /
• 2002

Resently, reduction of industrial products in size and weight has increased by the application of micro-drill for gadgets of high precision and gave rise to a great interest in a micro-drilling. Due to the lack of tool stiffness and the chip packing, micro-drilling requires not only the robust tool structure which has not affected by the vibration, but also the effective drilling methods designed to prevent tool fracture from cutting troubles. Firstly, this paper presents a new manufacturing process of micro-drill for improving the product rate and an optimum shape of micro-drill for lengthening the tool life, and secondly suggests between tool life and drilling torque acquired in the inprocess monitoring system.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.133-140
• /
• 2004

Recently reduction of industrial products in size and weight has been increased by application of micro-drills in gadgets of high precision and a great interest of a micro-drilling has been raised. Due to the lack of tool stiffness and the chip packing, the micro-drilling requires not only the robust tool structure which has not affected by vibration but also effective drilling methods designed to prevent tool fracture from cutting troubles. This paper presents an optimum design shape of a 0.15 mm micro-drill associated with a new manufacturing process to improve the production rate and to lengthen the tool life and suggestions on the micro-drilling characteristic properties associated with the tool life and workpiece quality.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.418-421
• /
• 2007

For Shock obsorber piston led is launched to the market through luring, milling, grooving, rolling, inspection and finally packing processes, To this time around 11 items, that is, out diameter and length etc..for the piston lod are inspected strictly as a total inspection. Piston Lod is being produced 30,000 a day and its excessively repeating inspection is getting induce repetition strain injury and reduce production rate as fatigue accumulation of worker increase inspection errors. Therefore, for the inspection process is severely needed a progressive improvement through the automation. In this study, we consider automation method of piston led inspection process and suggest an efficient automation strategy as improving the various problems in present manual inspection way.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1537-1541
• /
• 2007

We injection molded a wedge type of plate with micro prizm patterns on its surface and investigated the fidelity of replication of the micro pattern depending on the process parameter such as mold temperature, melt temperature, injection rate or packing pressure. The size of the size of the $90^{\circ}$ prizm pattern is $50{\mu}m$ and the size of the plate is about 300㎜${\times}$200㎜. The thicknesses are 2.6㎜. and 0.7mm at each edge of the wedge type of plate. The fidelity of the replication turned out quite different according to the process parameters and location of the patterns on the plate. We measured the cavity pressure and temperature in real-time during the molding to analyze the effect of the local melt pressure and temperature on the micro pattern replication.