• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1210-1215
• /
• 2010

프로브 카드는 반도체 제조 공정 전에 반도체 소자 및 필름의 기능과 성능을 검사하기 위한 테스트 장비이다. 반도체 산업의 급속한 기술 발전과 반도체 소자의 고집적화로 인하여 반도체 소자의 패드 간격과 패드의 수가 증가하고 있다. 따라서 반도체 소자의 크기 및 배열의 형태가 계속 축소됨에 따라 미세 피치를 갖고 검사용 핀의 수가 많은 프로브 카드가 필요하다. 본 논문에서는 수직형 프로브 카드의 적용을 위하여 MEMS 기술을 이용한 프로브 팁을 개발하였다. 프로브 팁의 설계를 위해서 유한요소해석을 이용하여 프로브 팁의 구조 및 기계적 특성에 대한 구조설계를 수행하였다. 또한 구조 설계를 적용한 프로브 팁을 제작하여 유한요소해석의 결과와 실제 시험을 통한 접촉력의 평가를 수행하였다. 이에 따라 피치 간격이 약 $50{\mu}m$이하의 프로브 카드를 제작하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.3.1-3.1
• /
• 2011

Over the past decade, the major efforts for lowering the cost of electronics has been devoted to increasing the packaging efficiency of the integrated circuits (ICs), which is defined by the ratio of all devices on system-level board compared to the area of the board, and to working on a larger but cheaper substrates. Especially, in flexible electronics, the latter has been the favorable way along with using novel nanomaterials that have excellent mechanical flexibility and electrical properties as active channel materials and conductive films. Here, the tool for achieving large area patterning is by printing methods. Although diverse printing methods have been investigated to produce highly-aligned structures of the nanomaterials with desired patterns, many require laborious processes that need to be further optimized for practical applications, showing a clear limit to the design of the nanomaterial patterns in a large scale assembly. Here, we demonstrate the alignment of highly ordered and dense silicon (Si) NW arrays to anisotropically etched micro-engraved structures using a simple evaporation process. During evaporation, entropic attraction combined with the internal flow of the NW solution induced the alignment of NWs at the corners of pre-defined structures. The assembly characteristics of the NWs were highly dependent on the polarity of the NW solutions. After complete evaporation, the aligned NW arrays were subsequently transferred onto a flexible substrate with 95% selectivity using a direct gravure printing technique. As proof-of-concept, flexible back-gated NW field effect transistors (FETs) were fabricated. The fabricated FETs had an effective hole mobility of 0.17 $cm2/V{\cdot}s$ and an on/off ratio of ${\sim}1.4{\times}104$. These results demonstrate that our NW gravure printing technique is a simple and effective method that can be used to fabricate high-performance flexible electronics based on inorganic materials.

• 대한전자공학회논문지SD
• /
• 제47권7호
• /
• pp.37-43
• /
• 2010

영상데이터의 용량이 늘어남에 따라, 시리얼 링크의 전송속도는 점점 빨라지고 있다. 따라서 기존에 제시되었던 상용화규격도 계속해서 전송속도를 상향시킨 차기 버전을 제안하고 있다. 차기 버전은 기존 버전과 호환성을 갖춰야 하므로 두 가지 이상의 전송속도로 동작할 수 있는 송수신기 회로가 필요하다. 본 논문에서는 4개의 채널을 가지며, 3.2 Gb/s 또는 6.4 Gb/s의 전송속도로 동작하는 송신기를 설계하였다. 이 송신기는 1, 1.5, 2, 3배의 pre-emphasis를 선택적으로 사용할 수 있으며, 출력 스윙을 200, 300, 400, 600 mVdiff,p2p로 선택할 수 있다. 설계된 송신기는 $0.13{\mu}m$ CMOS 공정을 이용하여 제작되었으며, COB 패키징을 이용하여 PCB에 실장되어 검증되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.1051-1054
• /
• 2000

We developed the micro CSF (celebrospinal fluid) shunt valve with surface and bulk micromachining technology in polymer MEMS. This micro CSF shunt valve was formed with four micro check valves to have a membrane connected to the anchor with the four bridges. The up-down movement of the membrane made the CSF on & off and the valve characteristic such as open pressure was controlled by the thickness and shape of the bridge and the membrane. The membrane, anchor and bridge layer were made of the $O_2$ RIE (reactive ion etching) patterned Parylene thin film to be about 5~10 microns in thickness on the silicon wafer. The dimension of the rectangular nozzle is 0.2＊0.2 $\textrm{mm}^2$ and the membrane 0.45 mm in diameter. The bridge width is designed variously from 0.04 mm to 0.12 mm to control the valve characteristics. To protect the membrane and bridge in the CSF flow, we developed the packaging system for the CSF micro shunt valve with the deep RIE of the silicon wafer. Using this package, we can control the gap size between the membrane and the nozzle, and protect the bridge not to be broken in the flow. The total dimension of the assembled system is 2.5＊2.5 $\textrm{mm}^2$ in square, 0.8 mm in height. We could precisely control the burst pressure and low rate of the valve varing the design parameters, and develop the whole CSF shunt system using this polymer MEMS fabricated CSF shunt valve.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.49-55
• /
• 2012

Even though corrugated boards are the most common packaging materials for agricultural products, conventional corrugated boards are not able to maintain the freshness of agricultural products. In order to overcome the limitations of conventional corrugated boards, a new hybrid corrugated board-composed of linerboard, a corrugating medium, and non-woven fabric-was designed to possess antibacterial, high porous and shock-absorbing properties. In this study, we compared the physical properties of non-woven fabric to those of the base papers of conventional corrugated boards and developed a new adhesive system as a first step toward manufacturing the hybrid corrugated board. We found that the non-woven fabric, which had relatively high elongation, was applicable in the corrugated board process, and that the manufacturing conditions must be controlled in order to prevent the break of the non-woven fabric. The mixture of starch and styrene-butadiene (SB) latex showed high adhesive strength, but the addition level of SB latex should not exceed 30% in starch solution.

• 한국동물위생학회지
• /
• 제33권3호
• /
• pp.303-307
• /
• 2010

The aim of this study was to determine the effects of body weight, organ weight, hematological values and biochemical parameters by estrogen on the ovariectomized (OVX) rats. The animals were divided into 4 groups. Intact group (n=10) received no treatment and operation. Sham group (n=10) received only sham operation and no treatment. OVX group (n=10) received operation and no treatment. OVX+E2(n=10) received operation and estrogen. The body weight of each group increased, but that of OVX+E2 group decreased. There were very significant differences (P<0.001) of body weights between OVX+E2 group and the other groups. Also, the wight of important organs such as heart, liver, spleen and kidney was measured. The heart weight was significantly lower(P<0.05) in the OVX+E2 group than the Intact group. The liver weight of the OVX+E2 group was significantly different in comparison with those of the other groups. On the other hand, there were no significantly differences in the organ weight of spleen and kidney between the OVX+E2 group and the other remaining groups. The hematological values of WBC, RBC, MeV, MCH and MCHC were not significantly different among the groups. The serum total protein and albumin decreased significantly in the OVX+E2 group as compared to those in the intact group. But, there were no significant differences in Ca, IP and Mg among the groups. We conclude that estrogen was significantly decreased the body weight in the ovariectomized rats. Our findings suggest that estrogen may influence the process of lipid packaging and absorption in the ovariectomized rats.

• 한국동물위생학회지
• /
• 제34권1호
• /
• pp.63-68
• /
• 2011

The present study was devised to determine the effects of body weight, organ weight, hematological values and biochemical parameters by vitamin E and selenium (Selevit) on the Orch rats. The animals were divided into 4 groups. Intact group (n=10) received no treatment and operation. Sham group (n=10) received only sham operation and no treatment. Orch group received operation and no treatment. Orch+Selevit received operation and Selevit. The body weights of each group increased, but that of the Orch+Selevit group were significantly lower than those of all the other groups. There were significant differences (P<0.001) of body weights between Orch+Selevit group and all the other groups. Also, organ weights such as heart, liver, spleen and kidney were measured. The heart weights were significantly lower (P<0.001) in the Orch+Selevit group than in Intact and Sham group. The liver weights in the Orch+Selevit group were significantly differences (P<0.001) in comparison with those in the Intact and Sham groups. The kidney weights in the Orch+Selevit group were significantly differences (P<0.01, P<0.001) in comparison with those in all the other groups. On the other hand, there were no significantly differences in the organ weights of spleen between the Orch+Selevit groups and the any other groups. The number of white blood cell (WBC) was significantly higher (P<0.05) in the Orch+Selevit group than in all the other groups. The hematological values of red blood cell (RBC), mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH) and mean corpuscular hemoglobin concentration (MCHC) were not significantly different in any of the groups. The concentrations of serum total protein, albumin and alkaline phosphatase increased significantly (P<0.05, P<0.01) in the Orch+Selevit group as compared to that in the Orch group. However, there were no significant differences in AST and ALT in any other groups. We conclude that Selevit was significantly decreased the body weight in the orchidectomized rats. Our findings suggest that Selevit may influence the process of lipid packaging and absorption in the orchidectomized rats.

• 한국동물위생학회지
• /
• 제34권1호
• /
• pp.69-73
• /
• 2011

This was conducted to determine the effects of body weight, organ weight, hematological values and biochemical parameters by L-carnitine (Carn) on the orchidectomized (Orch) rats. The animals were divided into 4 groups. Intact group (n=10) received no treatment and operation. Sham group (n=10) received only sham operation and no treatment. Orch group received operation and no treatment. Orch+Carn received operation and L-carnitine. The body weights of each group increased, but that of the Orch+Carn group were significantly lower than those in all the other groups. There were significant differences (P<0.05, P<0.001) of body weights between Orch+Carn group and all the other groups. Also, organ weights such as heart, liver, spleen and kidney were measured. The heart weights were significantly lower (P<0.001) in the Orch+Carn group than those in Intact and Sham groups, respectively. The weights of liver and kidney in the Orch+Carn group were significantly differences (P<0.001) in comparison with those in all the other groups. Also, the spleen weights were significantly lower (P<0.05) in the Orch+Carn group than those in Intact and Sham groups, respectively. The hematological values of mean corpuscular volume (MCV) and mean corpuscular hemoglobin (MCH) were significantly differences (P<0.05, P<0.01, P<0.001) in comparison with those in all the other groups. On the other hand, the hematological values of white blood cell (WBC), red blood cell (RBC) and mean corpuscular hemoglobin concentration (MCHC) were not significantly different in any other groups. The concentrations of total cholesterol (T-chol), triglyceride (TG) and high density lipoprotein (HDL) decreased significantly (P<0.05) in the Orch+Carn group as compared to those in the Orch group. We conclude that L-carnitine was significantly decreased the body weight in the orchidectomized rats. Our findings suggest that L-carnitine may influence the process of lipid packaging and absorption in the orchidectomized rats.

• 한국수산과학회지
• /
• 제49권6호
• /
• pp.772-778
• /
• 2016

To develop a value-added product from individually quick-frozen oysters Crassostrea gigas (IQFO), we prepared a retort pouched oyster soup (RPOS) from IQFOs and characterized its processing conditions and quality metrics. We found that the most appropriate manufacturing process for the RPOS consisted of half-thawing and washing raw IQF oysters, blanching, adding them to the retort pouch along with other ingredients (base soup stock, IQF oyster extract, radish, bean sprouts, garlic, and red pepper), sealing, retort sterilization ($120^{\circ}$, F0-value 10 min.), cooling, and packaging inspection. The moisture, crude protein, pH and salinity of the RPOS were 91.0%, 2.8%, 6.20 and 0.9%, respectively. The total amino acid content of the RPOS was 2,163.8 mg/100 g, and the main amino acids were glutamic acid, aspartic acid, leucine, proline, lysine and arginine. The primary inorganic ions were Na, K, S and Zn. In taste compounds, total free amino acid content was 313.4 mg/100 g, and the main free amino acids were glutamic acid, taurine, proline, hydroxyproline, aspartic acid, glycine, alanine, valine, lysine and arginine. This RPOS has good storage stability and organoleptic qualities compared with commercial retort pouched shellfish soup, and is suitable for commercialization as a value-added instant seafood soup.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.63-70
• /
• 2020

본 논문에서는 35 GHz 대역의 군 탐색기용 송수신 모듈을 설계 및 제작하였다. 밀리미터파 대역의 기판 성능과 집적도를 높이기 위해, 4층 액정 폴리머 기판을 개발하였다. 4층 액정 폴리머 기판은 3장의 FCCL 기판과 2장의 접착층으로 구현되었으며, 적층을 위해 기판간의 녹는 점 차이를 이용한 공정을 이용하였다. 스트립선로와 마이크로스트립 선로를 이용하여 기판의 길이에 따른 전송손실을 확인하였고, 35 GHz 대역의 전력분배기를 통해 액정폴리머 기판의 성능을 검증하였다. 이러한 기판을 이용하여 전력증폭기와 저잡음증폭기와 같은 송수신모듈을 구성하는 개별 블록에 대한 성능을 확인한 후, 단일 채널 Ka대역 송수신모듈을 4층 액정 폴리머 기판을 이용하여 개발하였다. 제작한 송수신모듈의 송신출력은 펄스 Duty 10%에서 1.1W 이상, 수신 잡음지수는 8.5 dB 이하, 수신 이득은 17.6 dB 이상의 수신 특성을 갖는다.