• Korean Journal of Food Science and Technology
• /
• v.1 no.1
• /
• pp.51-61
• /
• 1969

In order to eliminate the considerable loss of rice by insects, to protect the human body from toxin excreted by some microbes, and to promote the storage efficiency of rice by employing the irradiation, the following experiments were carried out. Two varieties of rice, Paldal and Nongkwang polished and unpolished by the conventional methods and were packaged in polyethylene bags. After irradiating to the doses of 6-400 Krad of gamma-radiation from a $Co-^{60}$ source the samples were stored at the room temperature $20^{\circ}C$ for 8 months. The effects of radiation in terms of the removal of insects and microbes and the changes of chemical components (such as moisture, amylose, free sugar, and rancidity) were determined monthly from march to October during the storage. 1) Infestation of insects was greatly influeneed by the packaging materials used. There was no infestation in rice being packaged in a polyethylene bag, while as the rice packaged in a straw sack was infested in two months of the storage. 2) Some yeast and molds survived 400 K rad of radiation. Sterilizing dose to inhibit reproduction and growth of microbes was presumed to be higher than 400 K rad. Yeast mainly were found on the surface of rice, but mold were embeded into rice kernels by mycelium. 3) Changes of moisture contents during storage was not affected by radiation but was by humidity of the storage room. 4) Amylose content in starch increased with increasing dose of radiation and with the length of storage time, indicating possible depolymerization of starch molecules. 5) Free reducing sugar content was not affected by radiation and decreased with storage time. 6) Rancidity also increased with does and storage time.

• Journal of Sensor Science and Technology
• /
• v.10 no.5
• /
• pp.292-303
• /
• 2001

This work reports the tunneling effects of the lateral field emitters. Tunneling effect is applicable to the VMFS(vacuum magnetic field sensors). VMFS uses the fact that the trajectory of the emitted electrons are curved by the magnetic field due to Lorentz force. Polysilicon was used as field emitters and anode materials. Thickness of the emitter and the anode were $2\;{\mu}m$, respectively. PSG(phospho-silicate-glass) was used as a sacrificial layer and it was etched by HF at a releasing step. Cantilevers were doped with $POCl_3(10^{20}cm^{-3})$. $2{\mu}m$-thick cantilevers were fabricated onto PSG($2{\mu}m$-thick). Sublimation drying method was used at releasing step to avoid stiction. Then, device was vacuum sealed. Device was fixed to a sodalime-glass #1 with silver paste and it was wire bonded. Glass #1 has a predefined hole and a sputtered silicon-film at backside. The front-side of the device was sealed with sodalime-glass #2 using the glass frit. After getter insertion via the hole, backside of the glass #1 was bonded electrostatically with the sodalime-glass #3 at $10^{-6}\;torr$. After sealing, getter was activated. Sealing was successful to operate the tunneling device. The packaged VMFS showed very small reduced emission current compared with the chamber test prior to sealing. The emission currents were changed when the magnetic field was induced. The sensitivity of the device was about 3%/T at about 1 Tesla magnetic field.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.60-67
• /
• 2017

In this study, we performed surface modification of biodegradable microcrystalline cellulose (MCC) to use as a filler in polyethylene (PE) composite in food packaging application. We modified MCC surface with (3-trimethoxysilylpropyl)diethylenetriamine (TPDT) silane coupling agent, which has one primary amino group and two secondary amino groups per molecule, to introduce amino groups with a carbon dioxide adsorption capability in MCC. Effects of each of the reaction conditions such as amount of TPDT introduced, swelling time, reaction temperature, and reaction time on surface modification degree of MCC were investigated by changing a variety of above reaction conditions. The amount of TPDT grafted on MCC surface and formation of chemical bonds were confirmed by Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and solid state $^{29}Si$ nuclear magnetic resonance (NMR) spectroscopy. We confirmed increase of grafted amount of TPDT on MCC with increasing reaction time, reaction temperature, and amount of introduced TPDT.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.351-355
• /
• 2001

This study was carried out to examine the of quality on the dried Omija according to its package materials and storage plates. The changes of moisture contents, anthocyanin content, molds damage rates, and color values were measured during storage. In the sealing up by the P.E file, the moisture contents of the dried Omija had just a little differences among the storage places, but in the gauze bag remarkably as the storage period goes on, especially in this case, 8 months later since the storage in the cool chamber, the damage rates of the dried Omija by the mold was 9.0%, twice as much as in the indoor bag packaging it was increasand after 10 months, that was lather high in the indoor and warehouse. The anthocyanin content of the dried Omija after the storage of 10 months was the highest at 0.05mm black P.E film package in the cool chamber, which was 55.7 mg/100g, but in the indoor and warehouse 39.7, 45.0mg/100g, respectively. These results show thats the storage conditions had an important effect on the quality of the dried Omija during the long-term storage.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.720-727
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties of Yukwa during preparation with addition of antioxidants and to develop its storage condition. Antioxidants (tocopherol and Oxyfos) were used in syrup coating and the packaging materials used were PET/EVOH $(16\;{\mu}m)/PL$ : P1 and PET/EVOH $(24\;{\mu}m)/PL$ : P2 (YOP1: P1 with Oxyfos, YOP2 : P2 with Oxyfos, YTP1 : P1 with tocopherol, YTP2 : P2 with tocopherol). Color values measured for Yukwa showed that L values of YOP1, YOP2, YTP1 and YTP2 were changed little during storage while a and b values of YOP1, YOP2, YTP1 and YTP2 were slightly decreased. Hardness and chewiness in textural properties were also decreased during storage. Yukwa packed in YOPl and YOP2 maintained less than 40 in peroxide value during for 12 weeks of storage period. The major fatty acid composition of frying oil were linoleic acid (54.2%), oleic acid (23.4%), palmitic acid (11.3%), linolenic acid (6.5%) and stearic acid (4.6%). There was no difference in composition of fatty acid during storage. Sensory evaluation (Yukwa odor and rancid odor) showed very similar results with determined by electronic nose. YTP1 and YTP2 had maintained sensory characteristics of Yukwa during 10 weeks storage.

• Composites Research
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2003

This study developed SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites for electronic packaging to which reinforcements were added with the volume fractions of 49%, 56% and 63% by the squeeze casting method. 0.8 wt. % of the inorganic binder as well as the A1$_2$O$_3$ fiber and SiC Particles with the volume fraction of 1:10 were added to the composites, which were produced in the newly designed mold. For the produced SiC/Al composites, the CTEs (coefficients of thermal expansion) were measured from 30 to 300 and compared with the FEM numerical simulation to analyze the temperature dependent properties. The experiment showed the CTEs of SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites that were intermediate values of those of Rule of Mixture and Turner's Model. The CTEs were close to Turner's Model in the room temperature and approached the Rule of Mixture as the temperature increases. These properties analyzed from the difference of the average stress acting between the matrix and the reinforcements proposed in this study.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.108-108
• /
• 2019

느타리버섯은 전남 장흥군에서 병재배로 재배된 '곤지 7호' 느타리버섯 품종을 $3^{\circ}C$에서 1일간 냉각시킨 후 실험에 사용하였다. 이산화탄소 처리는 10mm 두께의 아크릴로 제작한 밀폐 챔버($40{\times}70{\times}40cm$)를 이용하여 CO2가스를 주입하여 내부의 CO2 농도를 $30{\pm}1%$로 조정하여 3시간 동안 밀폐시켰으며 $3^{\circ}C$ 저온 저장고에서 수행하였다. 처리 후 포장필름은 3처리로 하여 PVC랩, 재배농가에서 이용하는 필름인 $20{\mu}m$ OPP필름, $30{\mu}m$ OPP필름을 재료로 하여 산소투과율을 $5,000cc/m2{\cdot}day{\cdot}atm$로 조정한 필름(OPP5)을 사용하였다. PVC랩 처리는 스티로폼 트레이에 옮긴 후 균일하게 한 겹으로 둘렀고, OPP와 OPP5는 봉지에 옮겨 봉지 입구 4cm 안쪽을 비닐접착기로 열접착하여 밀봉하였으며 $3^{\circ}C$에 저장하면서 필름내부의 기체조성, 경도, 색도, 이취, 종합선도 변화를 조사하였다. 포장된 느타리버섯의 포장재 내 이산화탄소 농도는 저장초기 0.03%에서 점차 증가하여 저장 3일 후 PVC랩은 3.5~3.9%, 나머지 처리는 18%이상으로 증가하였으며 OPP필름보다 OPP5필름의 경우 포장재 내 이산화탄소 농도가 더 낮게 유지되었다. 생체중 감소는 PVC랩에서 저장 26일 후 9.9% 이하로 육안으로 보이는 시들음이 관찰되었으며 나머지 처리들은 저장 26일 후까지 1.6% 이하의 중량감소율을 보였다. 느타리버섯 갓 경도는 유지되었으며 줄기표면의 황색도 $b^*$값은 PVC랩에서는 증가 경향을, OPP나 OPP5에서는 유지 경향을 보였다. 느타리버섯의 이취 및 전체적인 품질은 무처리 후 PVC랩 포장은 저장 6일 후에 이취가 상품성 한계로 발생하였고 OPP5 포장은 포장재 중 가장 이취발생이 늦게 발생하였으며 CO2 처리에 의해 지연되는 것을 알 수 있었다. 이런 결과를 종합하여 느타리버섯의 $3^{\circ}C$ 저장 중 품질유지기간은 각 PVC랩(6일) ${\rightarrow}$ 30% CO2+PVC랩(7일) ${\rightarrow}$ OPP(10일) ${\rightarrow}$ 30% CO2+OPP(17일) ${\rightarrow}$ OPP5(20일) ${\rightarrow}$ 30% CO2+OPP5(22일)로 조사되었다. CO2처리 후 산소투과율을 $5,000cc/m2{\cdot}day{\cdot}atm$으로 조정한 미세천공(OPP5)필름이 가장 높은 전체적 품질점수를 나타내었으며 상대적으로 낮은 이취발생, 갈변과 갓무름이 적어 높은 점수를 얻는데 영향을 준 것으로 보인다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.109-109
• /
• 2019

2018년 5월 전라북도 남원군에서 재배하여 수확 후 $0^{\circ}C$ 저장고에서 예냉을 마친 산마늘을 사용하였으며 외 포장 상자는 골판지로 구성된 통기공이 없는 골판지상자 1kg용을 사용하였다. 골판지상자와 함께 내부 포장으로 사용하기 위한 내포장 필름은 $20{\mu}m$ 두께의 HDPE으로 된 필름 봉지, 흡습종이는 파라핀왁스 코팅 종이($32{\times}35cm$, 태영산업)를 이용하여 조합 처리하고 국내에서 개발한 기능성 필름2종으로 포장처리는 총 4가지로 (1) PE(관행) (2) PE+흡습지 (3) 기능성필름1($30{\times}58cm$, 기능성물질 1%+40,000OTR, 제조사: 신영산업사) (4) 기능성필름2($30{\times}58cm$, Key fresh, 제조사: 씨앤케이프로팩(주)) 각 처리당 1kg 씩의 산마늘 잎을 포장하였다. 실험은 포장 처리 후 상온상태로 전북 완주군 실험실까지 수송하였으며 실험실 도착 후 상온 실험실에 두고 2일과 6일 후 중량감소율, 색도, 엽록소, 손실률 및 종합선도 등 품질특성 변화를 조사하였고 각 포장방법별 온도와 상대습도 변화를 보기 위하여 산마늘 잎이 포장된 상자 내부 중앙 부분에 디지털온습도기록계(SP-2000-20R)를 고정한 후 측정하였다. 대조구로 사용한 PE필름 단용으로 포장한 산마늘 잎은 상온저장 6일 경과 후 중량 소율이 1.7%, PE필름+신선지 처리는 1.0%, 기능성필름1과 기능성필름2는 거의 중량감소가 없어 1% 미만의 변화를 보였다. 산마늘 잎의 SPAD 값에 의한 엽록소 수치와 색도를 측정한 명도($L^*$)와 Hue angle 값의 변화는 기능성필름1과 기능성필름2가 유사하게 높게 유지되었고 반면에 PE필름은 저장 2일 후 부터 값이 감소하기 시작하여 6일 후 크게 감소하였다. 저장 6일 후 기능성필름1과 기능성필름2가 외관품위에서 높은 평가를 받아 상품성을 유지하고 있었으나 PE필름 처리와 PE필름+흡습지 처리는 상품성을 상실한 상태였다. 이러한 경향은 건전율에 있어서도 유사하였으며 기능성필름1(다공성 나노 물질이 혼입되어 있으며 산소투과율을 $40,000cc/m2{\cdot}day{\cdot}atm$으로 조성한 필름)이 상온저장 6일 후 상품성을 유지하는 건전율이 83%로 가장 높았다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.279-298
• /
• 2019

This study comprehensively addresses recent progress at KAERI in waste treatment technology to cope with waste produced by pyroprocessing, which is used to effectively manage spent fuel. The goal of pyroprocessing waste treatment is to reduce final waste volume, fabricate durable waste forms suitable for disposal, and ensure safe packaging and storage. KAERI employs grouping of fission products recovered from process streams and immobilizes them in separate waste forms, resulting in product recycling and waste volume minimization. Novel aspects of KAERI approach include high temperature treatment of spent oxide fuel for the fabrication of feed materials for the oxide reduction process, and fission product concentration or separation from LiCl or LiCl-KCl salt streams for salt recycling and higher fission-product loading in the final waste form. Based on laboratory-scale tests, an engineering-scale process test is in progress to obtain information on the performance of scale-up processes at KAERI.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2022

Purpose Recently, in the process of examining the self-disposal of radioactive waste by the Korea Institute of Nuclear Safety, it is difficult to reach the final approval process for self-disposal. In connection with this, we intend to increase the processing efficiency of self-disposal and strengthen safety by analyzing cases of recent supplementary matters. Materials and Methods From 2018 to 2021, we compare and review a supplementary requests that preparing the procedures and plans for the self-disposal of radioactive waste by 20 institutions. In this regard, based on the provisions of the Atomic Energy Safety Act, we derive a detailed proposals for the self-disposal of radioactive waste by arranging the review processing period calculation and supplementary requests that occurred during the review process. Results The representative supplementary requests of the Korea Institute of Nuclear Safety are the calculation of the storage period by type and nuclide of radioactive waste, the contents of the packaging container, the RASIS reporting method, the planned storage method for self-disposal, confirmation of the final disposal company, and the storage period of the waste filter Calculation, radioactive labeling, etc. And it is emphasized as important. Conclusion The expected effects of the guidelines reflecting the latest supplements include reduction of the time required for document preparation and increase of work processing efficiency, improvement of storage efficiency in the radioactive waste storage room, and economic cost reduction. If the radioactive waste self-disposal guideline presented in this study is applied to the field, it is thought that it will be helpful in improving the work efficiency of those who are experiencing difficulties.