• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.2
• /
• pp.12-18
• /
• 2001

Increasing use of plastics in food packaging materials has led to the issue of food-plastic packaging materials mutual interactions. Rapid development of new microwavable ready-to-meal products requires suitable plastic packaging materials for safe heating with the contained food. However, data is still required to diminish consumers' safety concern about ready to meal packaging materials. Amounts and patterns of extracted materials from the ready-to-meal packaging materials of Korea and Japan by heat treatments ($120^{\circ}C$ for 30 min.) was investigated and compared by using Gas chromatography. Total peak number of extracted materials from Korea packaging materials was six while that of extracted materials from Japan's was only two. Moreover, the extracted amounts of packaging materials from Korea company was much higher than those of Japan's. Additional research is needed to justify the reason why extracted materials from packaging materials from Korea be much more occurred, and how the amounts from Korea packaging materials can be reduced.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.1 no.1
• /
• pp.51-61
• /
• 1995

This paper is discussed on the prospects of packaging industry and technologies of Japan for comming 21th century. It is clear that packaging industry depends on living style and social mechanizms. A trends of numerical consumption, amounts of money and composisition of packaging materials are one of a measure of development of packaging industry. Total consumption of packaging materials in Japan of 1965, 1980 and 1993 were $6,344.5{\times}10^3,\;15,898.7{\times}10^3\;and\;21,603.3{\times}10^3$ tons respectively and also, shipping money of packaging materials were $7,073{\times}10^{11},\;45,421{\times}10^{11}\;and\;63,902{\times}10^{11}$ yen, respectively. It is estimated from these data that the packaging industry is also increasing in future according of GNP of country. Compositions of packaging materials from 1965 to 1993, however, are somewhat changing according to development of new materials or social conditions such as platics packaging or wooden packaging materials. Technical forcasts of packaging industry are shown from view point of national living style, energy and resorces as well as environment of world based on forcasting committee of pulp & paper in Japan, report of research committee for the 21th packaging in JPI and materials of symposium in Kanagawa University in this paper. As a my conclusion, many functional packaging materials shall be developed in the future and accordingly Life Cycle Assesment plays a important role of packaging fields. Furthermore, I am estimating in future the new cellulosic materials such as nonwood fiber resources instead of paper, board, wooden containers and a part of plastic packaging materials shall be developed. This paper is constructed by three items as follow:

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.691-709
• /
• 2007

Concerns on environmental waste problems caused by non-biodegradable petrochemical-based plastic packaging materials as well as consumer's demand for high quality food products has caused an increasing interest in developing biodegradable packaging materials using annually renewable natural biopolymers such as polysaccharides and proteins. However, inherent shortcomings of natural polymer-based packaging materials such as low mechanical properties and low water resistance are causing a major limitation for their industrial use. By the way, recent advent of nanocomposite technology rekindled interests on the use of natural biopolymers in the food packaging application. Polymer nanocomposites, especially natural biopolymer-layered silicate nanocomposites, exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased mechanical strength, decreased gas permeability, and increased water resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. Consequently, natural biopolymer-based nanocomposite packaging materials with bio-functional properties have huge potential for application in the active food packaging industry. In this review, recent advances in the preparation and characterization of natural biopolymer-based nanocomposite films, and their potential use in food packaging applications are addressed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.9-18
• /
• 2007

Nanocomposite has been considered as an emerging technology in developing a novel food packaging materials. Polymer nanocomposites exhibit markedly improved packaging properties due to their nanometer size dispersion. These improvements include increased barrier properties pertaining to gases such as oxygen, carbon dioxide, and water vapor, as well as to UV rays, and increased mechanical properties such as strength, stiffness, dimensional stability, and heat resistance. Additionally, biologically active ingredients can be added to impart the desired functional properties to the resulting packaging materials. New packaging materials created with this technology demonstrate an increased shelf life with maintaining high quality of the product. Nanotechnology offers big benefits for packaging. Nanocomposite technology paves the way for packaging innovation in the flexible and rigid packaging applications, offering enhanced properties such as greater barrier protection, increased shelf life and lighter-weight materials.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.316-322
• /
• 2010

The packaging of fruits is very important because appropriate packaging can optimize the maintenance of freshness of fruits during their distribution in low or normal temperatures until the products reach consumers. The focus of this study was on the use of functional packaging materials for the post-harvest maintenance of the freshness of fruits. Oak charcoal has excellent far infrared emission and ethylene absorption qualities, and we developed a charcoal-processing packaging linerboard to evaluate the possibility for the use of charcoal as a functional packaging material for pears. Oriental pears of the Niitaka cultivar used in this study account for about 70% of pears harvested every year, and are a very popular domestic fruit in Korea. Pears packaged in packaging materials processed with charcoal were of significantly higher quality (p<0.05) than those packaged with conventional packaging materials, suggesting that charcoal-processed packaging materials can be used as functional packaging material for extending the storability and distribution time of fruits. Charcoal-coated linerboard was shown to be the most appropriate packaging material based on its compression strength, ethylene absorption performance, and the firmness and minimal weight loss of pears.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.261-272
• /
• 2014

Home appliances go through a couple of packaging stages from the plant to consumers. The primary packaging, inner packaging for each part, happens for protection after products leave the plant. The secondary packaging happens in the unit of product, ensuring cushioning packaging to protect products from movement. The final tertiary packaging is for transportation and delivery. Each stage of product packaging, however, costs a lot of money because of disposable packaging materials used in each stage including vinyl, tapes, Styrofoam, and corrugated cardboards. Discarded packaging materials also cause environmental problems. In an effort to come up with a measure to solve those problems, this study proposed a plan to minimize logistics costs with semi-permanent packaging materials to replace disposable ones including Styrofoam, vinyl, and corrugated cardboards in the stages of inner packaging, cushioning packaging, product unit-based packaging, and transportation. The study also developed a model to cut down logistics costs by reducing various packaging stages including the primary, secondary, and tertiary stage only to the secondary one through module-type products instead of the transportation- and delivery-type ones, as well as demonstrated the excellence of the study through numerical analysis.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.07a
• /
• pp.134-141
• /
• 2001

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2005

This paper introduces the current status of total overseas packaging industries. The total market of the world packaging industry reached over 500 billion dollars in 2002. The top nations for the packaging industry were U.S. at about 27 percent, the countries of Western Europe at about 27%, Japan at about 14%. In terms of packaging materials, the overall market rate for paper, plastics, and metal parts in world packaging industry was 84%. Also, the market rate of glass, packaging machine, and others was only 5-6%. Among EU nations, Germany showed largest packaging consumption of 23 percent in 2000, and consumed about 17,125,814 ton of packaging materials yearly. For paper and paperboard cartons, the percentage used for the packaging consumption was about 39.4%. The consumption rate of plastic and glass packaging was approximately 14.6% and 23.7% respectively. For metal packaging the consumption rate was about 5.9%. In Japan, the production rate of packaging materials was decreased slowly at paper, metal, glass, and wood areas, but plastic packaging showed a constant rate of growth. In China, total production of packaging industry amounted to about 33.7 billion in 2003. The paper packaging in china was a remarkable production rate of 32%. The production rate of plastic and printing packaging was 28% and 20% respectively. The rate of packaging industry for printing in China was much higher than that in other countries.