• 한국보건간호학회지
• /
• 제9권1호
• /
• pp.44-58
• /
• 1995

This study was to investigated the relationship between health locus of control and health promoting behavior of College students. For this study, questionnaires were given to 300 students in the H University of Seoul and collected during the period from Nomber 17 to November 24, 1994. Health locus of control and health promoting behavior were measured by using the MHLC scale and a modified HPLP scale. Healthiness of life style is parameterized by self actualization, health responsibility, exercise, nutrition, stress management, and internal support. The data were analyzed using the statistics package SAS, yielding frequency, percentage, mean, standard deviation, t-test, ANOVA, Pearson's Correlation. The result of this analysis are as follows: 1. Among the components of health locus of control, internal health locus of control showed the highestscore (mean: 3. 12, standard deviation: 0.46). Powerful others health locus of control followed next with the mean of 2. 30 and the standard deviation of 0.44. Chance health locus of control showed the mean of 2.29, and the standard deviation of 0.43 2. The HPLP mean score and the standard deviation of practice of health promoting behavior were 2.51 and 0.31 respectively. 3. HPLP correlated positively with internal health locus of control (r= 0.20, p<.01) and powerful others locus of control (r= 0.21. p<.001). However, HPLP inversely correlated with chance locus of control (r=-0.13, p<.05) 4. The demographic variables representing sex (t= 2.26, p<.05), health status (F = 5.52, p<.01) showed connections to health promoting behavior. Therefore, nurses should consider health locus of control when they take care of College students to improve such health promoting behavior as self actualization, exercise, internal support, stress management, and health responsibility. Further research is required to discover factors influencing health promoting behavior of College students.

• 한국포장학회지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2015

Fruit and vegetables are subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to customers using parcel delivery service, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the fruits with frequency range 3 to 150 Hz. The resonance frequency of the pear ranged from 53 to 102 Hz and the amplitude at resonance was between 1.08 and 2.48 G. The resonance frequency and amplitude at resonance decreased with the increase of the sample mass, and they were slightly affected by mechanical properties such as bioyield deformation and rupture deformation. Regression analysis was performed among the relatively high correlated parameters from the results of correlation coefficient analysis.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.64-70
• /
• 2008

Temperatures of engine head and liner depend on many factors such as spray and combustion process, coolant passage flow and engine related structures. To estimate the temperature distribution of engine structure, multi-dimensional computational fluid dynamics (CFD) codes have been mainly adopted. In this case, it is of great importance to obtain the realistic wall temperature distribution of entire engine structure. In the present work, a CFD-FEM coupling methodology was presented to address this demand. This approach was applied to a real large-size marine diesel engine. CFD combustion and coolant flow simulations were coupled to FEM temperature analysis. Wall heat flux and wall temperature data were interfaced between combustion simulation and solid component temperature analysis via translator by a commercial CFD package named FIRE by AVL. Heat transfer coefficient and surface temperature data were exchanged and mapped between coolant flow simulation and FEM temperature analysis. Results indicate that there exists the optimum cell thickness near combustion chamber wall to reasonably predict the wall heat flux during combustion period. The present study also shows that the effect of cell refining on predicting in-cylinder pressure during combustion is negligible. Hence, the basic guidance on obtaining the wall heat flux needed for the reasonable CFD-FEM coupling analysis has been established. It is expected that this coupling methodology is a robust tool for practical engine design and can be applied to further assessment of the temperature distribution of other engine components.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권7호
• /
• pp.922-925
• /
• 2015

This study was conducted to estimate the genetic parameters for pork belly traits and muscles in Yorkshire pigs. Each pork belly was cut into nine parts perpendicular to the thoracic vertebrae (6th to 14th). Traits of belly muscles including the deep pectoral, latissimus dorsi, cutaneous trunci, rectus abdominis, external and internal abdominal oblique from 382 purebred pigs were recorded and analyzed using SAS Package (9.1) and Derivative-free restricted maximum likelihood methods. Heritability estimates for belly traits ranged from 0.27 to 0.49, while they were 0.12 to 0.66 for belly muscles. Moderate to high heritability estimates were noted in belly weight (0.33), belly length (0.28), and belly width (0.49). In belly muscles, the latissimus dorsi and deep pectoral, which are located only in the 6th to 9th vertebrae sections, were found to have heritability estimates ranging from 0.21 to 0.29 and 0.23 to 0.35, respectively. Strong heritability estimates were observed in the 7th to 13th sections of cutaneous trunci muscle ranging from 0.42 to 0.66. Genetic correlations of latissimus dorsi m. with belly length were positive (0.50), while cutaneous trunci m. with belly weight also revealed a positive relationship that ranged from 0.35 to 0.47. The estimated genetic parameters indicate that belly weight can be improved by genetic selection. Differences in the levels of heritability occurred among various parameters of Yorkshire pork belly, which should be considered when performing selection to improve pork belly quality. Moreover, these results can provide valuable information that can be used as the basis for further investigations to improve pork belly.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2007년도 학술논문요약집
• /
• pp.190-191
• /
• 2007

Cleanout of the F Reactor Fuel Storage Basin (FSB) is an element of the FSB decontamination and decommissioning (D&D) and is required to complete interim safe storage (ISS) of the F Reactor. Following reactor shutdown and in preparation for a deactivation layaway action in 1970, the water level in the FReactor FSB was reduced to approximately 0.6 m (2 ft) over t]to floor. Basin components and other miscellaneous items were left or placed in the FSB. The item placement was performed with a sense of finality, and no attempt was made to place the items in an orderly manner. The F Reactor FSB was then filled to grade level with 6(20of local surface material (essentially a fine sand). The reactor FSB backfill cleanout has the potential of having to remove spent nuclear fuel (SNF) that may have been left unintentionally. Based on previous cleanout of six water-filled FSBs with similar designs (i.e., the B, C, D, and DR FSBs in the 1980's), it was estimated that up to five SNF elements could be discovered in the F FSB (I). In reality about 17 full SNF elements were found in the excavation. This paper covers the technical and programmatic challenges of performing this decommissioning effort with some of the controls used for SNF management. The paper also will highlight how many various technologies were married into a complete package to address the issue at hand and show how no one tools could complete the job, but combined, good progress is being made.

• 한국학교보건학회지
• /
• 제11권1호
• /
• pp.91-97
• /
• 1998

The main purpose of this study was to develop, implement, and evaluate a weight control program for overweight elementary school children The results of our previous study in 1996 Identified overweight as one of several health problems among elementary school children in urban areas The research method utilized was a quasi experimental design using one group in a pre and post test comparison The sample consisted of 198 children from 3 elementary schools in Kyung-gi Province who were 20% over the ideal weight for their height Height and weight were measured and a BMI score was calculated at the beginning of the program and monthly thereafter. The program had three components: physical exercise, counseling of children, and health education of children, parents, and teachers. The program lasted from March, 1997 to November, 1997. The data were analyzed using an SAS PC statistical package. The results indicate that the overweight children in two elementary schools had statistically Significant changes in their BMI score after the program while those in one school id not. When the process notes were reviewed it was Identified that the school which showed little change averaged less physical exercise, and less parent and teacher participation in the program In conclusion, a school based weight control program is an effective way to manage and prevent obesity for overweight elementary school children It is suggested that a school wide exercise program may be better accepted by overweight children than a program specifically designed for overweight children only. One of the most important factors which determine the successful outcome of any health promotion project in school is the enthusiasm and cooperation of the principal and school health nurse.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8541-8551
• /
• 2016

Background: The coverage of breast and cervical cancer screening has only slightly increased in the past decade in Thailand, and these cancers remain leading causes of death among women. This study identified socioeconomic and contextual factors contributing to the variation in screening uptake and coverage. Materials and Methods: Secondary data from two nationally representative household surveys, the Health and Welfare Survey (HWS) 2007 and the Reproductive Health Survey (RHS) 2009 conducted by the National Statistical Office were used. The study samples comprised 26,951 women aged 30-59 in the 2009 RHS, and 14,619 women aged 35 years and older in the 2007 HWS were analyzed. Households of women were grouped into wealth quintiles, by asset index derived from Principal components analysis. Descriptive and logistic regression analyses were performed. Results: Screening rates for cervical and breast cancers increased between 2007 and 2009. Education and health insurance coverage including wealth were factors contributing to screening uptake. Lower or non-educated and poor women had lower uptake of screenings, as were young, unmarried, and non-Buddhist women. Coverage of the Civil Servant Medical Benefit Scheme increased the propensity of having both screenings, while the universal coverage scheme increased the probability of cervical screening among the poor. Lack of awareness and knowledge contributed to non-use of both screenings. Women were put off from screening, especially Muslim women on cervical screening, because of embarrassment, fear of pain and other reasons. Conclusions: Although cervical screening is covered by the benefit package of three main public health insurance schemes, free of charge to all eligible women, the low coverage of cervical screening should be addressed by increasing awareness and strengthening the supply side. As mammography was not cost effective and not covered by any scheme, awareness and practice of breast self examination and effective clinical breast examination are recommended. Removal of cultural barriers is essential.

• 한국식품영양과학회지
• /
• 제38권1호
• /
• pp.98-104
• /
• 2009

본 연구는 $60^{\circ}C$ 고온저장 조건에서 4주 동안 PET 포장된 녹차음료의 품질 변화 특성과 품질열화를 최소화할 수 있는 포장 근거를 마련하기 위하여 PET 포장용기의 산소투과성 및 cap의 밀봉 안정성을 조사하였다. 고온저장 조건에서 MXD6 blend PET는 가스 차단성이 우수하였으며 4주 동안 TEN cap의 removal torque 변화도 적게 나타났다. 4주 동안 고온저장 중 녹차음료의 pH, 색도 및 비타민 C 및 카테킨 함량은 유의적으로 변화하였고 카페인과 총 아미노산의 함량은 고온저장 중 크게 변화하지 않았다. Hexanol, linalool, menthol 및 ${\alpha}$-terpineol 4종의 alcohol류 향기성분은 고온저장 3주차까지 급격한 함량 증가를 보였고 d-limonene은 큰 변화가 없었다. 관능평가 결과는 떫은맛과 향, 전체적인 맛은 기호도가 낮아지는 결과를 보였다.

• 한국음향학회지
• /
• 제15권5호
• /
• pp.99-106
• /
• 1996

컴프레서의 소음은 냉장고로부터 발생하는 전체 소음레벨중 높은 기여를 나타낸다. 그리고, 컴프레서로부터 방사되는 소음의 상당부분이 컴프레서 쉘의 진동에 의해 방사되는 소음이다. 본 연구에서는 컴프레서 쉘의 동특성을 규명하기 위하여 범용 구조해석 패키지인 MSC/NASTRAN을 이용하여 컴프레서 쉘을 여러 분계로 분리하여 해석한 뒤, 부분구조 합성법을 이용하여 전계의 동특성을 규명하였다. 그리고 각 분계의 변형 에너지와 운동에너지를 산정하여 각 분계가 전계에 기여하는 정도를 파악하였다. 컴프레서 소음에 가장 높은 영향을 미치는 1차모드를 고주파로 이동시키기 위하여, 1차 모드에 기여가 높은 분계의 질량과 강성을 변경하여 컴프레서 쉘의 동특성 개선 방향을 제시하였다.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.125-130
• /
• 2019

Shock and vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the pears for exporting with frequency range from 10 to 200 Hz, sweep rate of 1 octave/min, sweep method of logarithmic up and down and acceleration levels of 0.2, 0.4, 0.6, 0.8 and 1.0 G considering the domestic transportation environment. The resonance frequency of the pears ranged from 49.04 to 87.16 Hz and the amplitude at resonance was between 0.96 and 4.02 G in test frequency band and acceleration level. The resonance frequency and amplitude at resonance frequency band of the pears decreased with the increase of the sample mass. The multiple nonlinear regression equations for predicting the resonance frequency of the pears were developed using the independent variables such as mass, input acceleration.