• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.945-949
• /
• 1995

In order to investigate the performance of compression-type accelerometer on piezoelectric properties, PZT materials have been studied. The ring-shaped piezoelectric elements were prepared using commercial PZT powders by conventional ceramic process. Their estimated relative dielectric constant, piezoelectric charge constant (d33) and voltage constant (g33) values showed 390∼3400, (90∼593)×10-12 C/N and (19.5∼40.5)×10-3 V-m/N, respectively. The charge sensitivity of accelerometer is proportional to the piezoelectric charge constant value (d33) of PZT, but its voltage sensitivity is related with the piezoelectric voltage constant (g33). Since the mounted resonance frequency and sensitivity are dependent on the seismic mass as well as physical charateristics and size of PZT elements, the suitable considerations between two components are required for accelerometer's design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.450-453
• /
• 2004

A tactile stimulator array using stacked PZT is fabricated and evaluated in this paper. The purpose of this research is the development of a tactile stimulator to represent the obstacle information for the visually disabled. As a first step of this research, we investigate the physiological characteristics of tactile stimuli and design a tactile stimulator based on the investigated results. Also we evaluated a fabricated tactile stimulator. The prototype of tactile stimulator which has 2$\times$2 tactor elements with 3mm spacing is fabricated using stacked PZT actuator. In order to evaluate the characteristics of this tactile stimulator, physiological experiments are carried out. In the experiment, the threshold of tactile stimulus intensity within a frequency range of 5-500Hz at various stimulus amplitudes are investigated. According to the obtained experimental result, the input signal of tactile stimulator for the effective transfer of obstacle information is determined. Also physiological experiments of multi-stimuli recognition such as shift and rotation are carried out

• 연구논문집
• /
• s.33
• /
• pp.81-88
• /
• 2003

A metal jet printing system based on ink jet printing technique is one of the effective equipments for manufacturing elements of display devices, electrical devices, information processing systems, and so on. In order to develop an actuator of the metal jet printing system, bimorph type PZT actuator(length 25.2mm, width 7.2mm, thickness 0.5mm, shim thickness 0.2mm) and its controller(voltage range $\pm24v$, built-in fast recovery diode) were suggested and investigated. Performance tests and characteristic analysis, such as displacement, force, hysteresis and frequency, were carried out. The results show that the suggested actuator and controller are suitable for the metal jet printing system.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.581-586
• /
• 1994

Effect of excess and deficiency of PbO on the sintering and electrical properties of tetragonal Pb(Zr0.5Ti0.5)O3 were investigated. Fired density revealed maximum value with 4 wt% of excess PbO, and decreased with increasing amount of both excess and deficient PbO. Grain size increased with excess PbO, and decreased with deficiency of PbO. It appeared that excess PbO forms a liquid phase to enhance grain growth and completely volatilizes after sintering, whereas ZrO2 particles formed in PbO-deficient PZT inhibit grain growth. The change in the values of the equivalent circuit elements of PZT corresponded well with thar of porosity formed by excess and deficiency of PbO; kp, Co and Cm decreased while Qm, Rm and Lm increased conosiderably with porosity. This change was more pronounced in PbO-deficient type probably due to change in Zr/Ti ratio of PZT.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1E
• /
• pp.14-20
• /
• 2007

The characteristics of a PZT transducer with a cylindrical rear surface were investigated theoretically and experimentally. The transducer was assumed as a set of finite rectangular ceramic elements for applying the staircase model to the theoretical analysis and the KLM equivalent circuit model was modified for analyzing its electric impedance and pulse-echo response. All results were compared with those of a conventional plane transducer which has a constant thickness of average value for the cylindrical arc. It was noted that the transducer with a cylindrical rear surface has several subsidiary resonant frequencies which are able to widen bandwidth.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.392-397
• /
• 2011

The effect of various post-annealing temperature to sputtered Pb(Zr,Ti)$O_3$ (PZT) thin films was investigated. The crystallization process, surface morphology and the electrical characteristics strongly depends on the rapid thermal annealing (RTA). In radio frequency (RF) sputtering methods, there were many papers mostly forcing on the crystal forming and the surface variations with different elements distribution (Pb, Ti, Zr, O) on the surface of the PZT layer. In this experiment, the post-annealing treatment promoted the Pb volatilization in PZT thin film and affected the Ti diffused throughout the Pt layer into the PZT layer. Second ion mass spectroscopy (SIMS) analysis was employed to show that the Pb element in the PZT layer was decreased at the same time the Ti element mass was slight decreased than Pb with increasing RTA temperature. That result prove the content of Pb affect the PZT thin film property.

• Progress in Medical Physics
• /
• v.13 no.2
• /
• pp.79-84
• /
• 2002

In this study, a cylindrical ultrasound applicator is developed for the treatment of vagina and rectum in combination with high dose rate brachytherapy. A cylindrical transducer (PZT-8, 1=1.5 cm, thickness=1.5mm OD=2.5 cm) was used as an energy source for induction of hyperthermia. Three single-element applicators were constructed to examine the performance of the PZT material. Vector impedance was measured to determine driving frequency. The efficiencies of the elements were determined using a radiation force technique to evaluate the feasibility of using the applicator as a hyperthermia source. A multi-element ultrasound applicator was designed using the PZT-8 material for the treatment of vagina. Results from the vector impedance measurements showed maximum magnitude at 1.78, 1.77, and 1.77 MHz for applicator 1,2, and 3, respectively. The radiation force measurements showed that the acoustic power of 40 watts was obtained in all three elements. The average efficiencies of the elements were 61.4, 65.2, and 54.0% for element 1, 2, and 3, respectively. The designed ultrasound hyperthermia applicator could be used in combination with high dose rate brachytherapy for the treatment of vagina and rectum. The use of this applicator with intracavitary brachytherapy could offer improved tumor control by increasing radiosensitiyity of the tumor.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1093-1102
• /
• 1998

The success of controllability of smart structures depends on the quality of the bonding along the interface between the main structure and the attached sensing and acuating elements. Generally, the analysis procedures neglect the effect of the interfacial bond layer or assume that this bond layer behaves like viscoelastic material. Three different bond layers. two modified epoxy adhesives, and one isocyanate adhesive were prepared for their toughness and moduli. Bond layer of the chosen adhesive provides an almost perfect bonding condition between the composite structure and the PZT while bended significantly like arrow-shape. The perfect bonding condition is tested by considering various material properties of the bond layers. and based on this perfect bonding condition, the effects of the interfacial bond layer on the dynamic behavior and controllability of the test structure is experimentally studied. Once the perfect bonding condition is achieved. dynamic effects of the bond layer itself on the dynamic characteristics of the main structure is negligible. but the contribution of the attached PZT elements on the stiffness of the multi-layered structure becomes significant when the thickness of the bond layer increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.292-298
• /
• 2009

This paper investigates the control performance of the proposed hybrid mount system for vibration isolation table. The hybrid mount system consists of an air spring as a passive device and a PZT stack actuator as an active device in series. The feasibility of the PZT stack actuator as an active actuator was examined through the simple experiments. After that, a series of numerical simulations were carried out to evaluate the control performance of the proposed hybrid mount system. The equations of motion of the table with a set of hybrid mount systems consisting of four devices are derived. The air spring is considered as a 1 spring and 1 dashpot elements, and PID control algorithm is adopted to estimate the control force. The results of the numerical simulations presents that the proposed hybrid mount system could be the promising control system for vibration isolation table.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.383-389
• /
• 1991

The analysis of degradation phenomena of poled PZT ceramics was investigated relate to piezoelectric equivalent circuit elements. As a result, in the case of impressed mechanical shock on poled specimen of degradation phenomena was explained by domain rearrangement, and in the case of left in air, degradation phenomena was explained by space charge diffusion.