• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.1
• /
• pp.33-41
• /
• 1998

The response characteristics of the PZT transducers during glass capillary breakage were studied at the epicenter of the glass plate. The PZT transducers had been made by using EC-65 PZT ceramics(supplied by Edo co.) with a constant area and a various thickness. The theoretical displacement and velocity at the epicenter of glass plate with an air boundary condition were calculated by assuming the point load of 1N force strength and a rise time of 280 ns with a ramped functional dependence, and the 1st pulses of the PZT transducer may be considered as the vertical velocity incident on the electrode of the PZT ceramic. The responses of the PZT transducer may be depended on the thickness mode of the PZT ceramic below 0.33 in the ratio of the thickness to the diameter of PZT ceramic, but the reponse of the PZT transducer may be depended on the other modes of PZT transducer in the addition of the thickness mode of the PZT ceramic above 0.33. The full time of half maximum at the 1st pulse was nearly 280 ns without a variation of applied breakage load and the resonant frequency of the PZT transducer, and then may be considered as the rise time of a AE source. The maximum amplitude of the 1st pulse depended on the incident vertical velocity and capacitance of the PZT transducer. Therefore, the full time of half maximum and maximum amplitude of the 1st pulse may be considered as the rise time and strength of acoustic emission source respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.457-463
• /
• 2024

(Bi_1/2Na_1/2)TiO₃(BNT) piezoelectric ceramics are one of the promising materials that can replace Pb(Zr, Ti)O₃(PZT) piezoelectric ceramics due to the high electromechanical strain properties. However, it is still difficult to use practical applications because the required electric field for inducing electromechanical strain is relatively higher than that of PZT ceramics. To overcome this problem, it has been intensively studied on doping impurity or modifying other ABO₃ for BNT-based piezoelectric ceramics. Therefore, this study investigated the effects of La₂O₃ doping on the phase transition behavior and electromechanical strain properties in BNT-SrTiO₃ (BNT-ST) lead-free piezoelectric ceramics. In the case of the temperature-dependent dielectric properties, it was confirmed that a phase transition from ferroelectrics to relaxors is induced with increasing La₂O₃ content. As a result, the electromechanical strain properties of BNT-ST ceramics were improved. The highest S_max/E_max value corresponding to 300 pm/V was obtained at 2 mol% La₂O₃-dopped BNT-ST ceramics. Accordingly, this study successfully demonstrated that La₂O₃ doping is effective on the inducing phase transition from ferroelectrics to relaxors and the improving electromechanical strain properties of BNT-ST lead-free piezoelectric ceramics.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.829-834
• /
• 1994

The aim of this study is to investigate the changes in dielectric properties, Young's modulus and remnant compressive strength with compressive cyclic loading in PZT of tetragonal, MPB and rhombohedral composition. Higher relative dielectric constants appeared in the poled condition than the unpoled condition for all the compositions. After poling treatment remarkably higher relative dielectric constants were observed particularly in MPB, tetragonal compositions. Until five percent of the expected fatigue life was exhausted, the dielectric constant increased with compressive cyclic stress in MPB and rhombohedral while it remained nearly constant in tetragonal. During the subsequent compressive cyclic stress, dielectric constant decreased in all the three compositions. As the compressive cyclic stress is applied the change of Young's modulus was coincided with the change of remnant compressive strength.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.6
• /
• pp.524-529
• /
• 2008

In this paper, in order to develop low loss multilayer actuator, piezoelectric properties of PZW-PMN-PZT multilayer actuator sintered at $900^{\circ}C$ low temperature were investigated according to the number of multilayer. The multilayer actuator was fabricated using tape casting method and used pure Ag internal electrode. The density above $8.0\;g/cm^3$ was obtained at all specimens. With increasing number of multilayer, effective electromechanical coupling factor($k_{eff}$) was increased. $k_{eff}$ of multilayer actuator shows the maximum value of 0.283 at 11 layers actuator. However, effective mechanical quality factor(Qm') was decreased according to the increase of number of multilayer. The Qm' of multilayer actuator showed the maximum value of 920 at 5 layers actuator.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.753-756
• /
• 1992

The piezoelectric ceramics of PMS-PZT was made in the radial mode disk. As the results, in the application of filter required conditions: that is, higher-values for piezoelectric properties($K_p$, $Q_m$) and lower-values for stabilities of $F_{\tau}$(temp. coefficient, aging rate), 5PMS-51PT-44PZ composition statified well. This composition was made in the dot-ring type. Asthe results, with increasing $n^2$ both $Q_m$ and S had high values, decreasing $n^2$ both $K_p$ and BW had low values when the diameter of sintered bodies were constant. Therefore, curve of filter characteristic have sharped with increasing $n^2$ and BW broadened with decreasing $n^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.161-164
• /
• 2001

In this paper, we investigated the dielectric and piezoelectric properties of Pb(Sb, Nb)O$_3$-Pb(Zr, Ti)O$_3$ ceramic(PSN) for piezoelectric transformer and actuator etc. Effect of MnO$_2$ addition on the PSN ceramic was investigated. Anisotropic properties of electromechanical coupling factor and piezoelectric properties proved to be varied with amount of MnO$_2$ impurity and sintering temperature. The electromechanical coupling factor k$_{p}$ of 0.38 and the mechanical quality factor Q$_{m}$ of 1944 were obtained from the specimen with 0.4 wt% MnO$_2$ sintered at 115$0^{\circ}C$ addition. Experimental results indicated that the PSN ceramic with MnO$_2$ impurity can be effectively used for piezoelectric transformer and actuator.tor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.203-204
• /
• 2008

In this study, in order to develop the multilayer piezoelectric actuator and ultrasonic resonator, PMN-PNN-PZT ceramics were fabricated by the variations of ball size at sintering temperature of $900^{\circ}C$ and their piezoelectric and dielectric characteristics were investigated as a function of the variations of ball size. When the ball size was 3mm$\phi$, density, dielectric constant$({\varepsilon}r)$, electromechanical coupling factor(kp) and piezoelectric d constant$(d_{33})$ were increased. At the ball size of 3mm$\phi$, the specimen showed the optimum values of density=7.909g/$cm^3$, kp=0.592, Qm=1292, $d_{33}$=368pC/N, $\varepsioln_r$=1502, respectively.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.244-248
• /
• 1990

The effect of Nd3+ on the electrical and optical properties in PZT ceramics were investigated. The powders were prepared by the coprecipitation method using the salt solutions and Nd3+ was partially substituted for Pb2+ of Pb(Zr0.54 Ti0.46)O3. The coprecipitate were obtained under pH 11.8-12 and the single phase of PLZT powders were synthesized at about 500$^{\circ}C$. In the case of specimens with 4at.% of Nd which were sintered at 1250$^{\circ}C$ for 55 hours under 1atm, showed 50% of transmittance for 600nm(wave length).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.550-553
• /
• 2005

[ $Pb(Zr_{0.2}Ti_{0.8})O_3$ ] powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT thick films were fabricated by the screen-printing techniques on Pt/alumina substrates. The structural and dielectric properties were examined as a function of sintering temperature. The particle size distribution of the powder is bimodal with the mean particle size of about $1.2\;{\mu}m$. The average grain size of the PZT thick films sintered above $1000^{\circ}C$ was about $3.1\;{\mu}m$ and the thickness of the specimens was approximately $41\;{\mu}m$. The relative dielectric constant and dielectric loss of the thick films sintered at $1050^{\circ}C$ were 337 and $1.24\%$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.26 no.6
• /
• pp.755-762
• /
• 1989

A pyroelectric ceramic material based on Pb(Sn1/2Sb1/2)O3 modified PZT system is studied as a function of the amount of Pb(Sn1/2Sb1/2)O3 and PbTiO3. With increasing the Pb(Sn1/2Sb1/2)O3 amount the dielectric constant increases up to 10mol% and then decreases, but the pyroelectric coefficient decreases and as the PbTiO3 contents increase in the 10mol% added PZT system, the dielectric constant increases but the infrared sensitivity decreases. The good pyroelectric material has low dielectric constant and no pyrochlore phase, but does not depend in the amount of remanent dipole, and its composition sites around ferroelectric-to-antiferroelectric phase boundary.