• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.142-150
• /
• 2005

This paper presents a systematic approach to study the carrier based pulse width modulation (PWM) techniques applied to diode-clamped and cascade multilevel inverters by using multi-modulating patterns. This method is based on the description of controllable redundant parameters in the modulating signals. A unified mathematical formulation is presented for carrier based PWM methods, which obtains outputs similar to the corresponding space vector PWM. A full and separate control of the fundamental voltage, vector redundancies and phase redundancies can be obtained in the carrier based PWM. In this paper, the proposed PWM method and corresponding algorithm for generating multi-modulating signals will be formulated and demonstrated by our simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권4호
• /
• pp.54-69
• /
• 1991

This study deals with the position control of a hydraulic cylinder system operated by two port 3-way high speed solenoid valve in Pulse-Width-Modulation mode, instead of using conventional electro-hydraulic servovalve. Due to the complexity and the relatively poor reliability of the servovalve, an actuator using simpler and more study high speed solenoid valve will be presented. The high speed solenoid valve acts as converters of electronic pulse signal to hydraulic ones. It has been pointed out that there are practical problems to be solved in the PWM system, that is (1) accuracy of positioning control becomes considerably insufficient because the system is affected by on/off action of the solenoid valves, and (2) serious nonlinerality appears in the valve characteristics as a result of the switching behavior of the valves. As a method to overcome these defects, the differential PWM driving method of a hydraulic cylinder that improved the steady-state-error, flow rate nonlinearity in simple PWM, and the hydraulic hunting of dead time compensated-PWM driving is proposed in this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1937-1939
• /
• 1998

This paper presents a simple switching method to generate a PWM pattern mostly relevant to signle-phase three-level PWM rectifier. The adopted PWM switching pattern is performed in a manner similar to the space vector PWM method, which is popularly used in the three-phase rectifier and inverter. A set of possible voltages has been selected so that an equation with a time integral considered within a sampling period should be satisfied every sampling time. The simulation result shows that the proposed control scheme is good in some performance criteria such as unity power factor, low harmonic distortion of input current, dynamic response and voltage balancing of two series-connected DC capacitors.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.89-96
• /
• 1999

This paper proposes a common-mode voltage reduction method base on SVPWM(Space-Vector Pulsewidth Modulation) in three phase PWM converter/inverter system. By shifting the active voltage vector of inverter and aligning this to the active vector of converter, it is possible to eliminate a common-mode voltage pulse in one control period. Since the proposed PWM method maintains the active voltage vector, it does not affect the control performance of PWM converter/inverter system. Without any extra hardware, overall common mode voltage dv/dt and conrresponding leakage current can be reduced to two-third of the conventional three phase symmetric SVPWM scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.457-462
• /
• 1987

This paper deals with the PWM controlled active AC power filter. A new PWM control method from the viewpoint of speed and simplicity is proposed. And a microprocessor-based controller is used to realize the active AC power filter. The existing PWM control methods are primarily based on Fourier series expansion and these methods need FFT calculation and solving nonlinear harmonic equations, which are heavy burden to real-time control. The proposed method is based upon generalized pulse series expansion and needs only definite integrals of harmonic signal. So, computational effort can be reduced by a large margin. The digital circuit using 16-bit microprocessor is designed to implement the actual active power filler.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.283-288
• /
• 2000

본 논문은 마이크로프로세서를 이용하여 구현하는 전파브리지 인버터의 새로운 PWM 제어 방법을 제안한다. 이 방법은 단방향 전파 브리지 인버터의 한 주기를 주파수 변조비로 등간격 분할하고 기준 기본파와 인버터의 출력 기본파의 진폭을 비교하는 PWM 제어 방법이다. 이 방법을 이용하면 각 간격의 turn-on time 계산이 매우 용이하여 마이크로프로세서 구현에 매우 적합하다. 그리고, 고조파 해석에 있어서 주파수 변조비가 크면 모든 고조파를 무시할 수 있음을 보여준다 시뮬레이션과 실험을 통하여 타당성을 입증하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권3호
• /
• pp.27-33
• /
• 1993

본 논문은 캐리어 주파수 20kHz 이상의 고주파 전압형 PWM 인버터를 구동하기 위한 디지털 제어기에 관한 연구이다.적절한 PWM 패턴을 선택하기 위하여 기존의 PWM을 분석하였고, 비동기형 계단 정현파를 기준신호로 하여 제어기의 PWM 패턴을 구하였으며, PWM 제어방법은 가변 캐리어 비를 이용하였다.PWM 제어기는 모두 디지털 방식으로 구성하였다. 특히, 제시된 제어기의 구성은 연산 및 데이터 처리와 PWM 패턴 합성을 8비트 원칩 마이크로프로세서와 디지털 로직으로 나누어 설계하므로써 제어에 대한 속응성 및 제어성을 개선하였다. 또 변조도 데이터를 9비트로 출력하도록 프로그램을 적절히 이용하여 데이터 처리능력을 높였다.디지털 제어기는 회로구성을 i8051과 원칩 EPLD로 구성하였고, 설계된 제어기는 전압형 인버터를 동작시켜 제어성을 고찰하였다. 그리고 전압형 인버터 시스템의 고조파와 전류파형을 평가 분석하였다.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.352-359
• /
• 2008

본 논문에서는 왜곡된 전원전압 하에서 삼상 PWM 컨버터의 전류 보상 기법을 제안하였다. PWM 컨버터의 제어에 있어서 전원단 전압의 정확한 위상각 정보는 필수적이다. 동기좌표계 PLL 기법을 이용하여 고조파 전압이 포함되어 있는 전원단의 위상각을 검출하는 경우 전원 전압의 고조파로 인해 왜곡된 위상각을 얻게 된다. 이러한 왜곡된 위상각으로 컨버터를 제어하는 경우 입력 전류는 순수 정현파가 되지 않고 고조파가 포함된다. 본 논문에서는 왜곡된 전원단 전압 조건에 대해서도 입력 전류의 고조파를 IEEE Std. 519 규정인 5% 이내로 제한할 수 있도록 하는 전류 보상기법을 제안하였다. 시뮬레이션과 실험을 통하여 제안된 기법의 타당성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.675-679
• /
• 1999

A single-phase PWM current source rectifier with a neutral leg is presented and throughly analyzed in this paper. This novel topology is implemented by adding an extra leg a step-down single phase PWM space vector modulation method to reduce the dc output voltage harmonics is proposed. The PWM pattern generation need a digital system. As compared with a conventional single-phase PWM rectifier, over 20% improvement of the total harmonics distortion in the output voltage can be obtained. Different SVM techniques are analyzed for this PWM rectifier and simulation result are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.372-376
• /
• 2001

Due to several advantages of Pulse Width Modulation(PWM) Converter, such as unity power factor operation, elimination of low-order harmonics and regeneration of motor braking energy to source, the application range of PWM Converter has been rapidly extended in industrial application. Nowadays, vector control algorithm and space vector PWM(SVPWM) method are applied to improve the performances of PWM Converter, but vector control algorithm and SVPWM require to use Microprocessor and other digital devices in hardware, causing costly and somewhat large dimension system. In every practical application of energy conversion equipments, the design and implementation should be carried out considering cost and performance. High performance and low cost is the best choice for energy conversion equipments. So, this paper presents the practical design method and implementation results of 3-phase PWM Converter with analog hysteresis current controller, and verifies the performances of unit power factor operation and energy regeneration operation via experimental results.