• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1000-1001
• /
• 2006

In this paper, an DC/DC converter system has been proposed, which is suitable for fuel cell based power generation systems. The proposed converter system has outstanding advantages over the conventional dc-dc converters with respect to high efficiency and high power density. The developed converter system has been experimentally tested with using DSP PWM controller so that the performance of the proposed converter could be effectively examined and the validity of the converter could be verified.

• 항공우주기술
• /
• 제5권2호
• /
• pp.166-173
• /
• 2006

현대의 전자 장치는 안정적인 전력 공급을 위해 DC-DC Converter 등의 스위칭 전원을 사용하고 있다. 직류전원을 필요로 하는 통신장치는 안정적 동작과 높은 효율을 유지하기 위해 DC-DC Converter 등의 스위칭 전원의 사용이 불가피하며, 이는 에너지 절약이라는 시대적 요구에 부응하여 급속히 그 응용이 확산되고 있다. 이와같은 DC-DC Converter를 설계할 때는 각각의 동작 특징을 정확히 검토할 필요가 있다. 이를 위해 DC-DC Converter의 종류별 특성과 적용 분야 및 용도 분석을 통해 활용 분야를 파악하고, DC-DC Converter의 기본적 형태인 Buck type Converter를 선정하여 회로 설계 및 시뮬 레이션을 통해 이론적인 해석치과 설계치를 비교하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.269-271
• /
• 2005

본 논문은 입력 필터 상호 작용 (Interacton)의 일반적인 해석 방법으로 입력 필터단이 연결된 전류 제어 DC-DC 변환기의 동특성을 해석한다. 또한 입력 필터단의 강한 영향을 받는 상태의 전류 제어 강압형 변환기의 새로운 소신호 해석 결과를 제시한다. 이론적 해석은 컴퓨터 시뮬레이션 결과 및 제작된 실험용 PWM DC-DC 변환기로 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.363-365
• /
• 2005

KHSR(Korean High Speed Railway) had achieved the maximum speed of 350 km/h last year. And then, we have concentrated to improve the reliability of the overall system, in particular, motor block of the locomotive. In this paper, simple technique for operating PWM converters under the voltage distortion is introduced. In addition, the electrical braking technique is also made to have the braking capability under the dead zone. Test results revealed the verification of the proposed techniques.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1336-1338
• /
• 2000

This paper proposed the single phase multi-level PWM AC/DC converter using binary combine which controls input current by combining buck converters to improve input current characteristic, and confirmed its validity throughout simulation and experiment. This method, which is multiplying and duplicating output of converter of equal capacity, has the advantage of being able to control unit power factor of input current and reducing of the problem caused by high frequency switching, and appling to high power converter because filter is not necessary etc.

• 전기학회논문지P
• /
• 제51권4호
• /
• pp.163-168
• /
• 2002

This paper presents the comparison results of control algorithm for the simultaneous control of a multi output converter system that controls, simultaneously and independently, the separate Buck converter and Boost converter with the different specification by one DSP digital controller. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating the multi output DC-DC converter. By setting the software switch state, PI and Fuzzy controller can be applied as a controller for each converter without any change of hardware. Also, it is included the control characteristics comparison between PI and Fuzzy controller. The control characteristics of each PWM DC-DC converter is validated by experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.143-146
• /
• 2001

Servomotors, especially linear brushless servomotors have numerous advantages over ball screws, timing belts, rack/pinion drives and friction drives compared wi th rotary servomotors This paper proposes an linear regression method as the estimated ion of unknown parameters from the linear brushless DC motor The estimated parameters are used to tune the gain of controller. In order to agree with this purpose, Digital Signal Processor (TMS320F240), developed for implementation of the motor control, is adopted in this study. The processor playing an important role in controller has A/D converters, PWM generators, riched I/O ports internally.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권2호
• /
• pp.86-90
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously, the separate buck converter and boost converter with the different specification by one digital controller using fuzzy algorithm. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. Inference procedure of fuzzy controller is included. The control characteristics of each PWM DC-DC converter is validated by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.6-8
• /
• 2002

Generally in solar air conditioning system, the diode rectifier is used to build up DC link voltage from AC source. The diode rectifier is simple and cheap but it brings out the problems of low power factor and plentiful harmonics at the AC source. Also It can degrade the utilization rate of solar energy because the reverse of power flow cannot be made. Hence, in this paper to overcome the peak power problems in summer and to endure good AC input characteristics, solar air conditioning system using the PWM converter is proposed. A high input power factor of 97[%] and an efficiency of 98[%] are also obtained. The harmonic guide lines of proposed rectifier is no interfered with inverter switching, resulting in a simple, reliable and low cost ac to dc converters in comparison with the boost type current improving circuits.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.26-35
• /
• 2009

A high efficiency active clamp sepic-flyback converter is presented for fuel cell generation systems. The proposed converter is a superposition of a sepic converter mode and. flyback converter mode. The output voltages of the sepic converter mode and flyback converter mode can be regulated by the same PWM technique with constant frequency. By merging the sepic and flyback topologies, they can share the transformer, power MOSFET and active clamp circuit. The result has outstanding advantages over conventional active clamp DC-DC converters: high efficiency, high power density, and component utilization. Simulation results and experimental results are presented to verify the principles of operation for the proposed converter.