• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.205-206
• /
• 2014

본 논문에서는 3-레벨 인버터 시스템에서 공통 모드 전압 변동 제거를 위한 새로운 Medium Vector PWM(MVPWM)을 제안한다. 제안된 MVPWM의 특징은 다음과 같다. 1) 스위칭 상태와 관계없이 공통모드 전압은 일정하게 유지된다. 2) 무게 중심좌표계 방법에 의하여 구현되므로 구현이 간단하고 직관적이다. 본 논문에서는 시뮬레이션을 통하여 제안된 MVPWM의 위와 같은 특성을 밝히고 태양광 인버터의 제어에 적합함을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.260-265
• /
• 1999

This paper describes a novel control method of a three-phase PWM inverter for uninterruptible power supply(UPS) applications. To obtain the fast dynamics and excellent harmonic characteristics, a new state feedback control technique is proposed. The proposed control consists of the inner-loop current and outer-loop voltage controllers with a load current estimator to reduce the effects of the load variations and nonlinearity. In order to verify the effectiveness of the proposed control, the simulation is carried out for various load condition.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.287-290
• /
• 1998

This paper presents PWM method which modulates two third period only during one cycle of power converter. This method is compared with the conventionl sinusoidal modulation method applying to the power converter with large capacity necessitating low switching frequency. The presented modulation method enables to reduce power semiconductor rating, minimize switching loss, and improve the current wave form.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.384-385
• /
• 2019

본 논문에서는 단상 컨버터/3상 인버터 시스템에서 공통모드 전압 저감을 위한 PWM 기법을 제안한다. 컨버터/인버터 시스템은 스위칭에 의한 공통모드 전압으로 인해 전동기의 누설전류와 절연파괴 등의 문제가 발생할 수 있다. 이에 본 논문에서는 영전압벡터 인가시간에 따라 유효전압벡터의 위치를 선정하여 공통모드 전압을 저감하는 방법에 대해 제안한다. 모의실험을 통하여 제안된 기법의 효용성을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.6
• /
• pp.64-72
• /
• 2000

This paper deals with the parallel operation of two PWM converters for auxiliary block of high speed train. The parallel operation of AC/DC PWM converter controlled by 3-level PWM switching method to operate switching devices to realize a high power factor and reduce the primary side of the transformer current harmonics is proposed. In this paper, it is presented the phase shift technique between two converters switching phase, solution to eliminate the coupling effects due to the transformer and zero crossing detection method for synchronized with the source and controller. Experimental results for laboratory system with TMS320C31 microprocessor and 10［kVA］PWM converter confirm the validity of the proposed algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.298-308
• /
• 2017

This paper presents a Interleaved Buck Converter(IBC) system with Random PWM to reduce electromagnetic noise by harmonics. Swithced mode power supply generally controlled by high switching frequency have a electromagnetic interference(EMI) issue due to the high-voltage/high-current switching to regulate the voltage in buck converter. To solve the problem. we present a novel IBC system with PRBS. IBC system has two active switches with 180 phase difference that controll the cicuit with two PWM signal. IBC system may be disadventageous for the cost due to the addtion of one set of switch, but it has adventages of power distribution, current ripple cancellation, fast transient response, and passive component size reduction. To verify the validity of study, simulation program has been bulit using PSIM and the experimental results of IBC system using RPWM was compared with the conventinal PWM and randomized PWM.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.617-624
• /
• 2023

Recently, miniaturization and low power consumption of electronic products and improved efficiency and power factor improvement have become a matter of great interest. In this paper, an AC-DC converter based on PWM control was designed and made. The AC-DC converter is designed with a structure in which one rectifier circuit and one output voltage control circuit are connected in series. The rectifier circuit is a diode-based single phase full-wave current circuit and the output voltage control circuit is a DC-DC conversion circuit based on PWM control. Arduino was used as the main control device for PWM control, and LCD was configured at the output stage so that the control result could be checked. The error between the output voltage displayed on the oscilloscope and LCD and the target output voltage was confirmed through repeated experiments with the test circuit, and the validity of the proposed design methodology was confirmed by showing an error rate of about 5% based on the oscilloscope measurement value.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.105-114
• /
• 2017

This paper proposes a design method of an LCL-filter for grid-tied three-level inverter systems. The demand for three-phase PWM inverters in applications such as wind or solar power generation systems has been increase in recent years. To reduce harmonic components caused by switching operation, such inverters are connected to the grid via an LCL filter. Although there are research results for designing LCL-filter, the modulation method should be fully considered to make the filter perform desired cancellation ability with minimized size. This paper presents the design methodology for an LCL-filter that is optimized for SVM switching operations. The simulation and experimental results verify the validity of the LCL-filter designed with proposed method in this paper.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.354-355
• /
• 2011

그 동안 스위칭 손실 저감을 위해 Si 다이오드를 SiC 다이오드로 대체한 인버터들이 많이 소개되었다. NPC 인버터에서도 마찬가지로 클램프 다이오드 소자를 SiC 다이오드로 대체함으로써 스위칭 손실을 저감시킬 수 있다. 하지만 IGBT의 스위칭 손실이 매우 크기 때문에 단지 클램프 다이오드 소자를 바꿈으로써 줄일 수 있는 스위칭 손실은 한계가 있다. 따라서 본 논문은 낮은 변조지수를 갖는 NPC 인버터에서 역회복 손실을 포함한 스위칭 손실을 최소화 시킬 수 있는 새로운 PWM 방법을 제시한다. 제안한 방법에 의해 역회복 현상은 거의 발생하지 않으며 스위칭 손실은 상당히 저감된다. 그러므로 전체 시스템 효율을 증가시킬 수 있고 인버터를 더 높은 스위칭 주파수에서 동작시킬 수 있다. 제안한 방법의 타당성은 각 소자의 성능평가와 수치해석적 방법을 적용해 검증하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.164-170
• /
• 2010

In brushless DC motor, current flow should be controlled such that only properly selected 2 out of 3 phases carry current depending on the position of rotor. In order to detect position of rotor, hole sensor, encoder, optical position-detecting sensor, and magnetic position-detecting sensor are frequently employed. These sensors not only often cause malfunction in low and high temperature but they also have disadvantage of increasing cost and size of an motor system. To reduce the cost and size and to increase the robustness of the motor system, recently researches on sensorless motor dirve are very active. This paper proposes a novel unipolar PWM switching method that can improve the control problem caused by the difficulty of detecting zero crossing point at high revolution speed by minimizing the switching noise while increasing the lifespan of the drive system.