• Plant Biotechnology Reports
• /
• 제2권1호
• /
• pp.7-11
• /
• 2008

A simple, high-frequency and reproducible protocol for induction of adventitious shoot buds and plant regeneration from leaf-disc cultures of Jatropha curcas L. has been developed. Adventitious shoot buds were induced from very young leaf explants of in vitro germinated seedlings as well as mature field-grown plants cultured on Murashige and Skoog's (MS) medium supplemented with thidiazuron (TDZ) ($2.27{\mu}M$), 6-benzylaminopurine (BA) ($2.22{\mu}M$) and indole-3-butyric acid (IBA) ($0.49{\mu}M$). The presence of TDZ in the induction medium has greater influence on the induction of adventitious shoot buds, whereas BA in the absence of TDZ promoted callus induction rather than shoot buds. Induced shoot buds were multiplied and elongated into shoots following transfer to the MS medium supplemented with BA ($4.44{\mu}M$), kinetin (Kn) ($2.33{\mu}M$), indole-3-acetic acid (IAA) ($1.43{\mu}M$), and gibberellic acid ($GA_3$) ($0.72{\mu}M$). Well-developed shoots were rooted on MS medium supplemented with IBA ($0.5{\mu}M$) after 30 days. Regenerated plants after 2 months of acclimatization were successfully transferred to the field without visible morphological variation. This protocol might find use in mass production of true-to-type plants and in production of transgenic plants through Agrobacterium/biolistic-mediated transformation.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.743-746
• /
• 2019

본 논문에서는 새로운 해양 방사선 자동 감시 시스템을 제안한다. 제안하는 시스템은 다음과 같은 특징들을 가진다. 첫 번째로 NaI + PVT 혼합형 검출기를 사용함으로 반응속도가 빠르고 정밀분석이 가능하다. 두 번째로 섬광체형 센서에 온도보상 알고리즘을 적용함으로서 추가적인 냉각장치가 필요 없으며 시시각각 변화하는 해양환경에 안정적인 운영이 가능하다. 세 번째로 냉각장치가 필요 없으므로 전력소비량이 적어 태양열을 활용하여 전력의 안정적인 공급이 가능하므로 해양환경 관측부이에 설치 가능하다. 네 번째로 GPS 및 무선통신을 사용하여 측정지역에 대한 정확한 위치정보와 실시간 데이터 전송기능으로 주변국 등의 원전사고 등 발생 시 즉각적인 경보대응이 가능하다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 방사선 측정범위는 세계 최고 수준인 $5{\mu}Sv/h{\sim}15mSv/h$의 범위에서 측정이 되었고, 정확도는 ${\pm}8.1%$의 측정 불확도가 측정되어 국제 표준인 ${\pm}15%$ 이하에서 정상동작 됨이 확인되었다. 내환경등급(방수)은 IP67을 달성하였고, $-20{\sim}50^{\circ}C$ 동작온도에서 5% 이내로 변동률이 측정되어서 안정성이 확인되었다. 진동시험 후 측정값 변화율이 10% 이내로 측정되어서, 파도에 의한 해양환경에서 진동으로 인한 측정값의 변화가 없을 것으로 확인되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.65-69
• /
• 2004

A computer code was developed to simulate the filling stage of the injection/compression molding process by a finite element method. The constitutive equation used here was the compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Simulations of a disk part under different processing conditions including the variation of compression stroke and compression speed were carried out to understand their effects on flow-induced birefringence. The simulated results were also compared with those by conventional injection molding and with experimental data from literature.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.415-440
• /
• 2015

In the present case study, High Strain Dynamic Testing of piles is conducted at 3 different locations of Kolkata city of India. The raw field data acquired is analyzed using Pile Driving Analyzer (PDA) and CAPWAP (Case Pile Wave Analysis Programme) computer software and load settlement curves along with variation of force and velocity with time is obtained. A finite difference based numerical software FLAC3D has been used for simulating the field conditions by simulating similar soil-pile models for each case. The net pile displacement and ultimate pile capacity determined from the field tests and estimated by using numerical analyses are compared. It is seen that the ultimate capacity of the pile computed using FLAC3D differs from the field test results by around 9%, thereby indicating the efficiency of FLAC3D as reliable numerical software for analyzing pile foundations subjected to impact loading. Moreover, various parameters like top layers of cohesive soil varying from soft to stiff consistency, pile length, pile diameter, pile impedance and critical height of fall of the hammer have been found to influence both pile displacement and net pile capacity substantially. It may, therefore, be suggested to include the test in relevant IS code of practice.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.137-142
• /
• 2008

본 논문에서는 $Low-V_T$ 트랜지스터가 필요 없는 로직공정으로 Parasitic NPN BJT를 이용하여 저 전압에서 동작 가능한 밴드갭 기준전압 발생기 회로를 제안하였다. $0.18{\mu}m$ triple-well 공정을 사용한 BGR회로를 측정 한 결과 VREF의 평균전압은 0.72V $3{\sigma}$는 45.69mV로 양호하게 측정되었다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.527-532
• /
• 2005

The construction industries are facing problems of productivity, quality of work, safety, and the completion of projects in time. In construction industry a worker is exposed to hazardous environment, and has to do more physical work, effecting his health and also productivity. The automation and robotics can offer solution to many problems of the industry. In the past the major barrier to construction automation is the lack of electronic components and systems. This is solved now with the development of information technology, and the current obstacle is the high cost of automated systems, shortage of public money for R&D, and problems of acceptance. The robots employed in construction have followed the same concept as those employed in manufacturing. However, construction industry requires a different kind of robot compared to manufacturing Industry. The robots are stationery and product moves along the assembly line in manufacturing sector, but construction robots have to move about the site because buildings are stationary and of large size. The construction robots must function in adverse weather conditions, including variation in humidity, and temperature and increase the overall construction productivity rate. The major objective of the paper is to review the existing applications of building robots and to assess their implementation in building industry. A case study is considered for the implementation of robots for the painting work of the University Building at Saifabad PG College of Science, Hyderabad, India.

• 전자공학회논문지
• /
• 제49권9호
• /
• pp.251-258
• /
• 2012

SSD (Solid-state Drive), 더 나아가 SSS (Solid-state Storage System)와 같은 고성능 스토리지 요구 사항을 지원하기 위해 최근 낸드 플래시 메모리도 DRAM에서와 같이 SDR (Single Data Rate)에서 고속 DDR (Double Data Rate) 신호구조로 진화하고 있다. 이에 따라 PHY (Physical layer) 회로 기술을 적용하여 협소 타이밍 윈도우 내에서 유효 데이터를 안정적으로 래치하고, 핀 간 데이터 스큐를 최소화하는 것 등이 새로운 이슈로 부각되고 있다. 또한, 낸드 플래시 동작 속도의 증가는 낸드 플래시 컨트롤러의 동작 주파수 상승으로 이어지고 동작 모드에 따라 컨트롤러 내부 소모 전력 변동성이 급격히 증가한다. 공정 미세화와 저전력 요구에 의해 컨트롤러 내부 동작 전압이 1.5V 이하로 낮아지면서 낸드 플래시 컨트롤러 내부 전압 변화 마진폭도 좁아지므로 이러한 소모 전력 변동성 증가는 내부 회로의 정상 동작 범위를 제한한다. 컨트롤러의 전원전압 변동성은 미세공정으로 인한 OCV (On Chip Variation)의 영향이 증가함에 따라 더 심화되는 추세이고, 이러한 변동성의 증가는 순간적으로 컨트롤러의 보장된 정상 동작 범위를 벗어나게 되어 내부 로직의 오류를 초래한다. 이런 불량은 기능적 오류에 의한 것이 아니므로 문제의 원인 규명 및 해결이 매우 어렵게 된다. 본 논문에서는 낸드플래시 컨트롤러 내부의 비정상적 전원 전압 변동하에서도 유효 타이밍 윈도우를 경제적인 방법으로 유지할 수 있는 회로 구조를 제안하였다. 실험 결과 기존 PHY회로 대비 면적은 20% 감소한 반면 최대 데이터 스큐를 379% 감소시켜 동등한 효과를 보였다.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2024-2034
• /
• 2016

This paper presents a DC-DC buck converter with a Phase-Locked Loop (PLL) that can compensates for power efficiency degradation over a wide input range. Its switching frequency is kept at 2 MHz and the delay difference between the High side driver and the Low side driver can be minimized with respect to Process, Voltage and Temperature (PVT) variations by adopting the PLL. The operation mode of the proposed DC-DC buck converter is automatically changed to Pulse Width Modulation (PWM) or PWM frequency modes according to the load condition (heavy load or light load) while supporting a maximum load current of up to 1.2 A. The PWM frequency mode is used to extend the CCM region under the light load condition for the PWM operation. As a result, high efficiency can be achieved under the light load condition by the PWM frequency mode and the delay compensation with the PLL. The proposed DC-DC buck converter is fabricated with a $0.18{\mu}m$ BCD process, and the die area is $3.96mm^2$. It is implemented to have over a 90 % efficiency at an output voltage of 5 V when the input range is between 8 V and 20 V. As a result, the variation in the power efficiency is less than 1 % and the maximum efficiency of the proposed DC-DC buck converter with the PLL is 95.4 %.