• 환경영향평가
• /
• 제23권3호
• /
• pp.169-176
• /
• 2014

The purpose of this study is to estimate the vibration reduction effect of the borehole which is controlled the vibration propagation in the ground. For this study, we measured the vibration velocity before and after the borehole installation. The results are as follows: The peak particle velocity(PPV) and peak vector sum(PVS) was reduced by the borehole. And also, the deviation of vibration velocity before and after the borehole installation showed large values in longitudinal and vertical component depending on the receive distance, and increased depending on the size of vibration energy. Finally, the vibration isolation efficiency was 25~35 percentage at 1.5m receive distance, and was 4~14 percentage at 3.0m receive distance. It was found that the vibration isolation efficiency was good in small vibration energy, but was not good at long receive distance.

• 한국발생생물학회지:발생과생식
• /
• 제22권3호
• /
• pp.213-223
• /
• 2018

Ultrastructural studies on oocyte differentiation and vitellogenesis in the oocytes of female Kareius bicoloratus were investigated by transmission electron microscopy. The Golgi complex in the cytoplasm is involved in the formation of yolk vesicles that contain yolk carbohydrates in the yolk vesicle of oocytes in the early vitellogenic phase. In this phase, many pinocytotic vesicles (PVs), which are formed by pinocytosis, contain yolk precursors (exogenous substances). These substances are associated with exogenous heterosynthetic vitellogenesis. In yolked oocytes in the late vitellogenic phase, two morphologically different bodies, which formed by modified mitochondria, appear in oocytes. One is a multivesicular body (synthesized by autosynthetic vitellogenesis), and the other is a yolk precursor (an exogenous substance formed by heterosynthetic vitellogenesis). The multivesicular bodies (MVB) are taken into the yolk precursors (YP) and are transformed into primary yolk globules. However, after the YP mix with exogenous PVs near the zona pellucida, they are transformed into primary yolk globules. Vitellogenesis of this species occurs via endogenous autosynthesis and exogenous heterogenesis. Vitellogenesis occurs through endogenous autosynthesis, which involves the combined activity of the Golgi complex, mitochondria and MVB formed by modified mitochondria. However, heterosynthesis involves pinocytotic incorporation of extraovarian precursors (such as vitellogenin in the liver) into the zona pellucida (via granulosa cells and thecal cells) of the yolked oocyte.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.535-543
• /
• 1997

In order to compare the accuracy of impression technique using the addition silicone putty and improved heavy body material, impression were taken for the natural 6 maxillary anterior teeth, and for the metal mast model that has full arch shape with 4 cylindrical abutment teeth. Marginal gingiva was retracted by routine method using retraction cord, and two techniques were tried to compare the length of impression materials in the gingival sulcus. This was aimed to see the effect of viscosity and hydraulic pressure of impression materials for the subgingival impression. Impressions for the full arch-shaped metal master model were taken to compare the linear stability of the different impression materials and their related techniques. The conclusions were as belows : 1. The one-step impression technique showed longer extension of impression material in gingival sulcus than two-step impression technique. 2. High viscosity and hydraulic pressure of impression material were useful to take subgingival impression. 3. There was no statistically significant difference for the two-dimensional accuracy of impression technique, but two-step technique showed better trend than one-step technique.

• Journal of Forest and Environmental Science
• /
• 제36권4호
• /
• pp.274-280
• /
• 2020

As the importance of biological resources increases, the conservation technology is becoming important for rarities. This study was conducted to establish an efficient cryopreservation conditions for the Deutzia paniculata, endangered plant species, by using both cryopreservation methods of vitrification and encapsulation. As a result, the sucrose pretreatment seed viability showed up to 30.7% in the treatments. The cryoprotectant treatment improved the viability of the seeds, and was found to be excellent in the vitrification method using PVS3. The vitrification method had over 10% higher germination rate than the seeds preserved by encapsulation. In addition, the germination rate showed a significant difference according to the cryopreservation treatment time, and the germination rate of seeds decreased very much as the long time became longer. Plants germinated from preserved seed in liquid nitrogen showed poor growth compared to untreated, and good growth in PVS3 120 minutes. In addition, the growth of germinated plants by liquid nitrogen treatment time was better in the vitrification method. These results are expected to be useful for long-term preservation of D. paniculata, endangered plants.

• 한국자원식물학회지
• /
• 제14권3호
• /
• pp.241-246
• /
• 2001

옻나무 근삽에 의한 묘목의 생산성을 향상시키기 위하여 7종류의 삽상배지를 공시하여 신초발생율과 묘소질을 조사하였다 삽상배지는 PV(peatmoss vermiculite = 1 : 1)와 PVS(peat moss : vermiculite : sand = 1 : 1 : 2) 처리구에서 3주 후부터 신초가 발생되었고, 삽 식 10주 후의 신초발생율은 PVSC(peatmoss : vermiculite : sand : clay loam = 1 : 1 : 2 : 2)배지에서 80%로써 가장 높았다. 삽수당 신초형성수는 PH와 PVC 삽상배지가 2.2개로써 가장 많았고 HSC 삽상배지 는 1.3∼1.5개로써 가장 적었으나 통계적인 유의차는 인정되지 않았다. Peatmoss, vermiculite, sand 및 clay loam을 각각 1:1:2:2 (v/v/v/v)로 혼합한 PVSC 삽상배지가 옻나무 근삽의 삽상배지로 이용하기에 양호하였으며, 수장, 분지수, 엽수, 경직경 및 엽면적 등의 묘소질 역시 양호하여 본포에 이식하기에 적당하였다.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.498-504
• /
• 2014

Potato virus Y (PVY) and potato leafroll virus (PLRV) are among the most damaging potato viruses and prevalent in most potato growing areas. In this study, cryopreservation was used to eradicate PVY and PLRV using two cryogenic methods. Potato shoot tips proliferated in vitro were cryopreserved through droplet-vitrification and encapsulation-vitrification using plant vitrification solution 2 (PVS2; 30% glycerol + 15% dimethyl sulfoxide + 15.0% ethylene glycol + 13.7% sucrose) and modified PVS2. Both cryogenic procedures produced similar rates of survival and regrowth, which were lower than those from shoot tip culture alone. The health status of plantlets regenerated from shoot tip culture alone and cryopreservation was checked by reverse transcription-polymerase chain reaction. The frequency of virus-free plants regenerated directly from highly proliferating shoot tips reached 42.3% and 48.6% for PVY and PLRV, respectively. In comparison, the frequency of PVY and PLRV eradication after cryopreservation was 91.3~99.7% following shoot-tip culture. The highest cryopreserved shoot tip regeneration rate was observed when shoot tips were 1.0~1.5 mm in length, but virus eradication rates were very similar (96.4~99.7%), regardless of shoot tip size. This efficient cryotherapy protocol developed to eliminate viruses can also be used to prepare potato material for safe long-term preservation and the production of virus-free plants.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.385-391
• /
• 2006

In vitro-grown axillary buds of Melia aredarach were successfully cryopreserved by vitrification. On the MS medium supplemented with BA 1 mg/L, multiple shoots were developed within $4{\sim}5$ weeks. Plantlets of Melia azedarach were cold-hardened at $10^{\circ}C$ for a 16-hr photo-period for 6 weeks. Excised axillary shoot-tips from hardened plantlets were precultured on a solidified Murashige & Skoog agar medium (MS) supplemented with 0.7 M sucrose for 1 day at $25^{\circ}C$. Axillary shoot-tip meristems wert dehydrated using a highly concentrated vitrification solution (PVS2) for 60 min at $0^{\circ}C$ prior to a direct plunge into liquid nitrogen (LN). The PVS2 vitrification solution consisted of 30% glycerol (w/v), 15% ethylene glycol (w/v), 15% DMSO (w/v) in MS medium containing 0.4M sucrose. After short-term warming in a water bath at $40^{\circ}C$, the meristems were transferred into 2 ml of MS medium containing 1.2M sucrose for 15 min and then planted on solidified MS culture medium. Successfully vitrified and warmed meristems resumed growth within 2 weeks and directly developed shoots without intermediary callus formation. The survival rate of cold-hardened plantlets for 3 and 4 weeks was 90%. We did not find any difference in PCR-band patterns between control and cryopreserved plants. This method appears to be a promising technique for cryopreserving axillary shoot-tips from in vitro-grown plantlets of Medicinal plants.

• Imaging Science in Dentistry
• /
• 제49권4호
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.300-303
• /
• 2013

On BIPV systems, especially roof-top PV systems, the power generation is easier to be reduced due to the shades of facilities nearby, or roof itself. To secure profitability of roof-top PV systems, the optimal design of solar arrays through the precise shading analysis is an important item of design considerations. In this paper, an optimization system for array design of roof-top PVs is to be developed using three-dimensional Geospatial Information System(GIS). The profitability of income and expense is considered through the shading analysis of entire roofs. By applying the system to project for validation, the adequacy and the improvement of NPV of the system were verified compared to expert's design. The system has significance by reason that PV modules are placed through rules established with expert knowledge and geometric rules were applied to reflect the constructability and maintainability.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.121-127
• /
• 2004

This paper presents a new vertex selection scheme for shape approximation. In the proposed method, final vertex points are determined by "two-step procedure". In the first step, initial vertices are simply selected on the contour, which constitute a subset of the original contour, using conventional methods such as an iterated refinement method (IRM) or a progressive vertex selection (PVS) method In the second step, a vertex adjustment Process is incorporated to generate final vertices which are no more confined to the contour and optimal in the view of the given distortion measure. For the optimality of the final vertices, the dynamic programming (DP)-based solution for the adjustment of vertices is proposed. There are two main contributions of this work First, we show that DP can be successfully applied to vertex adjustment. Second, by using DP, the global optimality in the vertex selection can be achieved without iterative processes. Experimental results are presented to show the superiority of our method over the traditional methods.