• Title/Summary/Keyword: PVS2

Search Result 77, Processing Time 0.027 seconds

Estimation of energy self-sufficiency in municipal wastewater treatment plant using photovoltaic power simulated by azimuth and hydrophilic coating (방위각과 초친수코팅에 따른 태양광발전량 시뮬레이션과 하수처리장 에너지자립율 산정)

  • An, Young-Sub;Kim, Sung-Tae;Kang, Ji-Hoon;Chae, Kyu-Jung;Yoon, Jong-Ho
    • KIEAE Journal
    • /
    • v.11 no.6
    • /
    • pp.133-138
    • /
    • 2011
  • This paper presents energy self-sufficiency simulated in municipal wastewater treatment plants (WWTPs) by adopting solar energy production systems that were simulated by varying azimuth and super-hydrophilic coating on the surface of photovoltaic (PV). Relative to the national average energy consumption in WWTPs, the employment of 100 kW PV system was simulated to achieve 2.75% of energy self-sufficiency. The simulated results suggested that the installation of PVs toward South or Southwest would produce the highest energy self-sufficiency in WWTPs. When super-hydrophilic coating was employed in the conventional PV, 5% of additional solar energy production was achievable as compared to uncoated conventional PV. When 100 kW of PV system was installed in a future test-bed site, Kihyeung Respia WWTP located in Yongin, South Korea, the energy self-sufficiency by solar power was simulated to be 1.77%. The simulated solar power production by azimuth and super-hydrophilic coating will be useful reference for practitioners in designing the solar PV systems in the WWTPs.

Antioxidative capacity of hydrolyzed rapeseed cake extract and oxidative stability of fish oil-in-water emulsion added with the extract

  • Lee, A-Young;Lee, Jeung-Hee
    • Food Science and Preservation
    • /
    • v.24 no.4
    • /
    • pp.529-535
    • /
    • 2017
  • Rapeseed cake was extracted with 80% ethanol and then fractionated with $H_2O$ (fraction I) as well as with 30% (II), 50% (III), 70% (IV), and 100% ethanol (V). Total phenolic content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric-reducing antioxidant potential, and Trolox equivalent antioxidant capacity were in the order of fractions II > III > I > IV > V. The three fractions with high antioxidant activities and TPC (I, II, and III) were pooled and hydrolyzed by NaOH solution, resulting in 18.97 mg sinapic acid/g hydrolyzed extract and 21- and 2.2-fold increases in TPC and DPPH radical scavenging activity, respectively. Hydrolyzed rapeseed cake extracts (200, 500, and 1,000 ppm) and catechin (200 ppm) as a comparison were added to 10% fish oil-in-water emulsion, and their effects on oxidative stability were investigated by measuring hydroperoxide values (PV) during refrigerated storage. PVs were significantly lower in the emulsions with added hydrolyzed extract as compared to the control (p<0.05) and significantly decreased with increasing extract concentration (p<0.05) over a period of 29 days. The emulsion added with hydrolyzed extract showed higher PV than that added catechin at the same concentration (200 ppm) during 13-22 days (p<0.05), but after then, the PV was not significantly different (p>0.05). This study indicates that hydrolyzed rapeseed cake extract rich in sinapic acid may inhibit oxidation in a fish oil-in-water emulsion in a concentration-dependent manner.

A successful regeneration from shoot tips of Fragaria x ananassa DUCH following cryopreservation by droplet-vitrification (작은방울유리화법을 이용한 딸기 생장점 초저온동결보존)

  • Lee, Young-yi;Baek, Hyung-Jin;Yoon, Mun-Seop;Balaraju, Kotnala;Song, Jae-young
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2019.04a
    • /
    • pp.80-80
    • /
    • 2019
  • This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of (Fragaria x ananassa DUCH. cvs. 'Derunoka' and 'Jumbo pure berry'. The shoot tips of strawberry were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.7M). Precultured explants were treated with loading solution (LS, C4) containing glycerol 17.5% and sucrose 17.5% for 40 min and exposed to dehydration solution (B1) containing 50% of glycerol and 50% of sucrose for 60 min at $25^{\circ}C$, and then transferred onto droplets containing $2.5{\mu}l$ PVS3 on sterilized aluminum foils ($4cm{\times}0.5cm$) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regeneration rate (%) was obtained when shoot tips were precultured with treatment-2 (exposing of shoot tips to MS + 0.3M Sucrose for 30 h and then treated with MS+0.5 M sucrose for 16 h) at $25^{\circ}C$ in both the cultivars. The viability of cooled samples, followed by culturing on MS medium for 4 weeks was 77.8% and 60.0% for 'Derunoka' and 'Jumbo pure berry', respectively. This result shows droplet-vitrification would be a promising method for cryobanking strawberry germplasm.

  • PDF

A Successful Regeneration from Shoot Tips of Chrysanthemum morifolium (Ramat.) following Cryopreservation by Droplet-vitrification

  • Yi, Jung-Yoon;Balaraju, Kotnala;Baek, Hyung-Jin;Yoon, Mun-Seop;Kim, Haeng-Hoon;Lee, Young-Yi
    • Korean Journal of Plant Resources
    • /
    • v.31 no.6
    • /
    • pp.675-683
    • /
    • 2018
  • This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of Chrysanthemum morifolium (Ramat.) cvs. 'Borami' and 'Yes morning'. The shoot tips of Chrysanthemum were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.7 M). Precultured explants were treated with loading solution (LS, C6) containing glycerol 20% and sucrose 20% for 30 min and exposed to dehydration solution (B5) containing 40% of glycerol and 40% of sucrose for 60 min at $25^{\circ}C$, and then transferred onto droplets containing $2.5{\mu}l$ PVS3 on sterilized aluminum foils ($4cm{\times}0.5cm$) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regeneration rate (%) was obtained when shoot tips were precultured with treatment-2 (exposing of shoot tips to MS + 0.3M sucrose for 30 h and then treated with MS+0.5 M sucrose for 16 h) at $25^{\circ}C$ in both the cultivars. The viability of cooled samples, followed by culturing on $NH_4NO_3$-free MS medium for first 5 days was increased to two-fold (80.7%) regrowth rate over those cultured on normal MS medium or MS medium containing plant growth regulators. This result shows droplet-vitrification would be a promising method for cryobanking chrysanthemum germplasm.

Cryopreservation of in vitro Grown Shoot Tips of Korean Potato Varieties by Droplet-vitrification

  • Ji-Won Han;Jinjoo Bae;Jae-Young Song;Ho Chul Ko;Sung-Hee Nam;Jung-ro Lee
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2023.04a
    • /
    • pp.33-33
    • /
    • 2023
  • Potatoes are the world's 4th major food crop after maize, rice, and wheat and also are a staple food for 1.3 billion people. Due to their wide adaptability to various environmental conditions, their yeild capacity, and high commercial value, potatoes have contributed to global food security. Many potato germplasms are commonly preserved as whole plants in fields or in storage to maintain their particular genetic combinations. However, field maintenance is expensive and has the risk of potential losses from diseases, pests, plant ageing and climate change. Over the past four decades, meaningful efforts have been made toward the safe long-term conservation of potatoes through cryopreservation methods such as droplet-vitrification. In this study, we tested 4 Korean potato varieties('Golden Egg', 'Golden Ball', 'Ja-Young' and 'Ha-Ryeong') with the modified potato droplet -vitrification protocol. Potato shoot tips are precultured in a sucrose-enriched medium(0.3 and 0.7M for 7 and 17hrs, respectively) and submitted to a loading step with C4 solution for osmoprotection. The treated explants were dehydrated with Plant Vitrification Solution(PVS)2 which is 80% A3 solution in ice for 30 minutes. Thawing and unloading steps were performed with 0.8M sucrose solution for 30 sec(40℃) followed by 30min(25℃, room temperature). In a potato post-culture medium(MS+0.1 mg·L-1 GA3+0.1 mg·L-1 kinetin), we obtained a survival rates of post-thawed explants ranging 16.1-82.2%. The results suggest that modified and optimized protocols are required dependinig on every cultivar, genetic and ecological types. To achieve higher survival and regeneration rates, each step within the cryoprocedure must be carefully optimized.

  • PDF

Effect of Sucrose and Polybrene on the Gene Transfer into Porcine Oocytes using Retroviral Vector (레트로 바이러스 벡터를 이용한 돼지난자에의 유전자 전이에 있어 Sucrose와 Polybrene의 효과)

  • Kim, . K.S.;M.S. Kwon;J.Y. Ju;Kim, K.S.;Kim, T.;Lee, H.T.;K.S. Chung
    • Korean Journal of Animal Reproduction
    • /
    • v.26 no.2
    • /
    • pp.153-163
    • /
    • 2002
  • In vitro matured porcine oocytes have very small volume of perivitellinspace (PVS). In these respect, the effect of sucrose and polybrene on the efficiency of gene transfer was investigated. As a gene (hGH) transfer vehicle, vesicular stomatitis virus glycoprotein pseudotyped retroviral vector (VSV-G) was used. Sucrose treatment has no detrimental effect on the rates of cleavage and resulted in the enlargement of PVS for the efficient introduction of retroviral vector stocks. Introduction rates of retrovirus in 0.5, 1, 2, 3 % sucrose treatment group were higher than that of the non-treatment group (39.3, 43.3, 35.7, 40.7 % vs. 8.3 %), respectively. In addition, we observed that sucrose pretreatment during injection procedure significantly reduce the frequency of polyspermy. In general, polybrene is a polycation essential for retrovirus transduction. The groups with the addition of 0.5, 5, 50$\mu\textrm{g}$/$m\ell$ polybrene exhibited a significant effect on gene transfer compared to that of the non-addition group (56.5, 50.0, 57.1 % vs. 34.6 %), respectively But, when the oocytes were co-injected with retrovirus and 50$\mu\textrm{g}$/$m\ell$ polybrene, the rates of cleavage and blastocyst development were 43.3 and 4.6%, respectively. This rates were lower than those of the non-addition group (70.0 and 17.3 %). In conclusion, sucrose pretreatment have increased efficiency of retroviral mediated gene transfer in porcine oocytes with no damage on in vitro fertilization and embryo development. In addition, sucrose pretreatment was beneficial in polyspermy inhibition. Presence of polybrene during microinjection showed a beneficial effect on the gene transfer in porcine oocytes, in low concentration. And these results will provide an useful tool for production of transgenic pigs by retroviral mediated gene transfer.

Cryopreservation of in vitro Grown Shoot Tips of Strawberry (Fragaria × ananassa Duch.) Genetic Resources by Droplet-vitrification

  • Lee, Young-Yi;Balaraju, Kotnala;Song, Jae-Young;Yi, Jung-Yoon;Lee, Sun-Yi;Lee, Jung-Ro;Yoon, Munsup;Kim, Haeng-Hoon
    • Korean Journal of Plant Resources
    • /
    • v.32 no.6
    • /
    • pp.689-697
    • /
    • 2019
  • This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of strawberry (Fragaria × ananassa Duch.) cvs. 'Wonkyo3114' and 'Gurumi40'. The shoot tips were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.5M). Precultured explants were osmoprotected with loading solution (LS, C4) containing 20% glycerol and 20% sucrose for 40 min and exposed to dehydration solution (B5) containing 40% glycerol and 40% sucrose for 40 min at 25℃, Subsequently, the explants were transferred onto droplets containing 2.5 μL PVS3 on sterilized aluminum foils (4 cm × 0.5 cm) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regrowth rate (%) in both the cultivars was obtained when the shoot tips were precultured with MS + 0.3M sucrose for 40 h at 25℃. The cryopreserved shoots tips exhibited 55% regrowth rate by culturing in NH4NO3-free MS medium supplemented with 3% sucrose, 1.0 g/L casein, 1.0 mg/L GA3, and 0.5 mg/L BA for 5 weeks and in MS medium supplemented with 0.5 mg/L GA3 for 8 weeks. This result shows that droplet-vitrification could be employed as a promising method for cryostorage of strawberry germplasm.

A Case Study on Typhoon-Midlatitude Synoptic System Interaction: Typhoons Rusa(0215) and Maemi(0314) (태풍-중위도 종관 시스템 상호작용 연구: 루사(0215), 매미(0314) 사례분석)

  • Choi, Ki-Seon;Kim, Baek-Jo;Park, Jong-Kil
    • Journal of Environmental Science International
    • /
    • v.16 no.9
    • /
    • pp.1051-1061
    • /
    • 2007
  • The impact of midlatitude synoptic system (upper-level trough) on typhoon intensity change was investigated by analyzing the spatial and temporal characteristics of vertical wind shear (VWS), relative eddy momentum flux convergence (REFC), and potential vorticity (PV). These variables were computed over the radial mean $300{\sim}1,000km$ from the typhoon center by using GDAPS (Global Data Assimilation and Prediction System) data provided by the Korea Meteorological Administration (KMA). The selected cases in this study are typhoons Rusa (0215) and Maemi (0314), causing much damage in life and property in Korea. Results show that the threshold value of VWS indicating typhoon intensity change (typhoon to severe tropical storm) is approximately 15 m/s and of REFC ranges 6 to 6.5 $ms^{-1}day^{-1}$ in both cases, respectively. During the period with the intensity of typhoon class, PVs with 3 to 3.5 PVU are present in 360K surface-PV field in the cases. In addition, there is a time-lag of 24 hours between central pressure of typhoon and minimum value of VWS, meaning that the midlatitude upper-level trough interacts with the edge of typhoon with a horizontal distance less than 2,000 km between trough and typhoon. That is, strong midlatitude upper-level divergence above the edge of the typhoon provides a good condition for strengthening the vertical circulation associated with the typhoons. In particular, when the distance between typhoon and midlatitude upper-level trough is less than 1,000 km, the typhoons tend to weaken to STS (Severe Tropical Storm). It might be mentioned that midlatitude synoptic system affects the intensity change of typhoons Rusa (0215) and Maemi (0314) while they moves northward. Thus, these variables are useful for diagnosing the intensity change of typhoon approaching to the Korean peninsula.

Drilling Characteristics of PVC Materials (PVC 재료의 드릴링 특성)

  • Byun, J.Y.;Park, Na-Ram;Chung, S.W.;Kwon, S.H.;Kwon, S.G.;Park, J.M.;Kim, J.S.;Choi, Won-Sik
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.14 no.1
    • /
    • pp.70-77
    • /
    • 2015
  • This paper develops and evaluates a mechanical machining process which involves drilling on PVS material. According to the material, two treatment experiments were conducted, one involving drilling in a wet condition or using a lubricant and one involving drilling in a dry condition with no lubricant. Drilling in a dry condition showed better performance in terms of the cutting time than in the wet condition. Otherwise, the wet condition has several advantages. The lubricant influenced the burr diameter size and minimized the temperature on the surface of the work piece. During the wet condition drilling process, a smaller burr diameter size was noted as compared to the dry condition. The temperature showed a linear correlation with the drill bit size, where a least-square analysis provided an $R^2$valuewhichexceeded 0.95. The wet condition required more cutting time than the dry condition. In this condition, the water provides a lubrication effect. A thin layer between the cutting edges and the surface of the work piece is formed. The chip formation is affected by the drilling depth. The color on the tips of the chips was darker than in the initial condition. No correlation between the drilling depth and the bore roughness was noted, but the variation of the cutting speed or the RPM influenced the roughness of the bore. The optimum cutting speed ranged from 40 RPM to 45 RPM in the condition which provided the finest roughness surface.

A Two-Step Vertex Selection Method for Minimizing Polygonal Approximation Error (다각형 근사 오차를 최소화하기 위한 2단계 정점 선택 기법)

  • 윤병주;이훈철;고윤호;이시웅;김성대
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.40 no.6
    • /
    • pp.114-123
    • /
    • 2003
  • The current paper proposes a new vertex selection scheme for polygon-based contour coding. To efficiently characterize the shape of an object, we incorporate the curvature information in addition to the conventional maximum distance criterion in vertex selection process. The proposed method consists of "two-step procedure." At first, contour pixels of high curvature value are selected as key vortices based on the curvature scale space (CSS), thereby dividing an overall contour into several contour-segments. Each segment is considered as an open contour whose end points are two consecutive key vortices and is processed independently. In the second step, vertices for each contour segment are selected using progressive vertex selection (PVS) method in order to obtain minimum number of vertices under the given maximum distance criterion ( $D_{max}$$^{*}$). Furthermore, the obtained vortices are adjusted using the dynamic programming (DP) technique to optimal positions in the error area sense. Experimental results are presented to compare the approximation performances of the proposed and conventional methods.imation performances of the proposed and conventional methods.