• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.696-700
• /
• 2012

(Na, K) $NbO_3$ thick film was successfully achieved using a sol-gel coating process with the addition of polyvinylpyrrolidone (PVP) to a metal alkoxide solution. The transparent coating solution, mixed with Nb:PVP = 1:1 in a molar ration, was synthesized by evaporating the solvent to over 62.5 wt%. Additive PVP increased the viscosity of the solution so that the coating thickness could be enhanced. The thickness of the (Na, K) $NbO_3$ film assisted by PVP was ca. 320 nm at the time of deposition; this value is four times thicker than that of the sample fabricated without PVP. Also, due to PVP binding with the OH groups of the metal alkoxide, the condensation reaction in the film was suppressed. The crystalline size of the (Na, K) $NbO_3$ films assisted by PVP was ca. 15 nm smaller than that of the film fabricated without PVP. After the sintering process at $700^{\circ}C$, the (Na, K) $NbO_3$ films were mainly composed of randomly oriented (Na, K) $NbO_3$ phase of perovskite crystal structure, including a somewhat secondary phase of $K_2Nb_4O_{11}$. However, by adding PVP, the content of the secondary phase became quite smaller than that of the sample without PVP. It was thought that the addition of PVP might have the effect of restraining the loss of potassium and that PVP could hold metalloxane by strong hydrogen bonding before complete decomposition. Therefore, the film thickness of the (Na, K) $NbO_3$ films could be considerably advanced and made more crack-free by the addition of PVP.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.146-148
• /
• 2003

SrZrO$_3$ resistive oxide barriers on Ag sheathed Bi2223 monocore tapes were prepared by the sol-gel and dip coating method to reduce AC coupling loss. The performance of the dip-coated SrZrO$_3$ thin films was evaluated in terms of bond strength and surface microstructure by varying the amount of PVP (polyvinylpyrrolidone) binder. Although bond strength and coating thickness increased as the PVP content rose, surface microcracking was more severe for the specimen containing higher content of PVP binder. It suggests that coating thickness and microcracking of the SrZrO$_3$ films on Bi2223 tapes was governed primarily by the amount of PVP binder.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.274-285
• /
• 1996

These experiments were conducted to evaluate the effects of seed coating with ten environmentally acceptable polymers, on germination percentage, water uptake, respiration, emergence and seedling growth characteristics. The water absorption of polymer-coated seeds in saturation condition was highest in klucel and lowest in polyvinyl pyrrolidone(PVP), and that in water was highest in klucel and lowest in maltrin. Respiration rates of polymer-coated seeds in Hwayoungbyeo and Ilpumbyeo were lower than those of none-coated seeds, and those in Daecheongbyeo and Jinmibyeo were higher than that of none-coated seeds, and those of sepiret coated seeds were higher than PVP coated seeds. The germination polimer-coated seed was reduced by one percentage by coating with seed coating machine. Germination percentage was not affected by any of polymer coating in high quality seed, but there were significant effects in low quality seed coating with waterlock, surelease 46 and sepiret significantly reduced germination some cultivars. Germination percentage after accelated ageing treatment were slightly higher most of polymer-coated seeds than in none-coated seeds, but those of sepiret-and klucel-coated seeds were lower significantly. Germination percentage of seeds coated with daran 8600, rnaltrin, sacrust and opadry were enhanced slightly under cold test other polimers reduced germination. The seedling height of polymer-coated seeds were longer than those of none-coated seeds, but those of waterlock, PVP and maltrin coating seeds were shorter, seedling hight was shortened by polimer coating under cold test. Polymer-coated seeds showed higher emergence percentage, shorter emergence time in field condition. The highest emergence percentage and the shortest emergence time was shown at 90% soil moisture content.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.66-70
• /
• 2019

The surface of hydrophobic polypropylene (PP) fibers (spun-bonded fabric) was treated by an atmospheric plasma treatment method. These pre-treated hydrophilic PP fabrics were dip-coated in the aqueous poly(N-vinyl pyrrolidone) (PVP) solution. PVP layers on the surface of PP fiber were crosslinked by an irradiation of electron beam. The thickness of PVP hydrogels coated on the surface was easily controlled by changing the concentration of PVP in coating solution. The stepwise surface treatment, PVP coating, and hydrogel formation via electron beam irradiation were analyzed by the measurement of contact angle, scanning electron microscopy, and optical microscopy.

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.51-55
• /
• 2021

We demonstrated a polymer dielectric with low leakage characteristics through an optimal blade coating method for low-cost and large-scale fabrication of metal-insulator-metal (MIM) capacitors. Cross-linked poly(4-vinylphenol) (C-PVP), which is a typically used polymer dielectric, was coated on a 10 × 10 cm indium-tin-oxide (ITO) deposited glass substrate by changing the deposition temperature (TD) and coating velocity (VC) in the blade coating. During the blade coating, the thickness of the thin c-PVP varied depending on TD and VC owing to the 'Landau-Levich (LL) regime'. The c-PVP-dielectric-based MIM capacitor fabricated in this study showed the lowest leakage current characteristics (10-6 A/㎠ at 1.2 MV/㎠, annealing at 200 ℃) and uniform electrical characteristics when TD was 30 ℃ and VC was 5 mm/s. In addition, at TD = 30 ℃, stable leakage characteristics were confirmed when a different electric field was applied. These results are expected to positively contribute to applications with next-generation electronic devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.42-42
• /
• 2009

To make up for the disadvantages of PVA gate, we blend PVP(20% wt) with PVA(5% wt) as a gate material. The best ratio for the mixture was 5:5, PVP-PVA blended gate used MIM structure showed better performance in leakage current and capacitance. PVP-PVA blended gate was fabricated by spin-coating process and pentacene was used as an organic TFT channel layer by thermal evaporation. Overall OTFT performance has also increased as PVP-PVA blended gate has relatively lower leakage current and higher capacitance than pure PVA gate has.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.219-223
• /
• 2015

Enhancement of the surface hydrophobicity of polydimethylsiloxane (PDMS) thin films deposited on substrates covered with titanium dioxide ($TiO_2$) nanospheres was studied. First, a low-temperature solution-phase method using polyvinylpyrrolidone (PVP) as a surface capping agent and a water/dimethylformamide (DMF) mixture as the reaction medium was used to synthesize monodisperse $TiO_2$ nanospheres. It was possible to easily control hydrolysis rate of the Ti-precursors and the size of the synthesized nanospheres by varying the amount of PVP and the volume ratio of the solvent mixture. Spray coating of the synthesized $TiO_2$ nanospheres under the PDMS film increased the water contact angle of the film surface to $150.3^{\circ}$. This simple treatment can modify the surface morphology at a nanometer scale without any long or complicated nanoprocess; hence, the surface enters the superhydrophobic Cassie-Baxter regime.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.501-505
• /
• 2003

SrZrO$_3$ resistive oxides on Ag tapes were prepared by the sol-gel and dip coating method to investigate the effect of PVP content and drying condition on microstructure of the films. Although the film thickness increased with the addition of PVP, the amount of PVP and heat treatment were not effective to reduction of formation of microcracks at the films. However, lower drying temperature and longer drying time were beneficial to control the microcracks of the SrZrO$_3$ films, indicating that the microcracking of the films was governed primarily by the drying condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

• Journal of Information Display
• /
• v.9 no.2
• /
• pp.1-4
• /
• 2008

In this study, we investigate the capacitance-voltage (C-V) characteristics of metal-insulator-semiconductor (MIS) capacitors consisting of pentacene, as an organic semiconductor, and polymeric insulators such as poly(4-vinylphenol) (PVP) orpolystyrene (PS) prepared by spin-coating process, to analyze the interfacial characteristics between pentacene and polymeric insulators. Compared with the device with PS, the MIS capacitor with PVP exhibited a pronounced shift in the flat-band voltage according to the bias sweep direction. This hysteric feature in the C-V characteristics is thought to be attributed to the trapped charges at the interface between pentacene and PVP owing to the hydrophilicity of PVP. From the experimental results, we can conclude that surface polarity of polymeric insulator has a critical effect on the interfacial properties, thereby affecting the bias stability of organic thin-film transistors.