• Korean Membrane Journal
• /
• 제11권1호
• /
• pp.8-14
• /
• 2009

The sulfonated poly(styrene-divinylbenzene-acrylonitrile) (ST-DVB-AN) composite polymer electrolyte membrane based on the original PVC film was successfully synthesized to improve oxidative stability using semi-interpenetrated polymer network (semi-IPN). Weight gain ratio after copolymerization was enhanced by the DVB and AN contents, and the sulfonated membranes were characterized in terms of proton conductivity (k), ion exchange capacity (IEC), and water uptake ($W_U$). The effect of DVB content and AN addition were thoroughly investigated by comparing the resulted properties including oxidative stability. The obtained ST-DVB-AN composited semi-IPN membranes showed relatively high proton conductivity and IEC compared with Nafion117, and greatly improved oxidative stability of the synthesized membrane was obtained. This study demonstrated that a semi-interpenetrated sulfonated ST-DVB-AN composited membrane reinforced by PVC polymer network is a promising candidate as an inexpensive polymer electrolyte membrane for fuel cell applications.

• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.903-913
• /
• 2021

본 연구에서는 싸이크론 헥산에서 PVC와 트리에틸디아민 (TEDA), 1,4-디메틸피페라진(DMP) 및 1,4-비스(이미다졸-1-일메틸)벤젠을 각각 치환반응시켜서3가지 형태의 PVC 멤브레인, AEM-1, AEM-2, and AEM-3를 제조하였다. AEM-1, AEM-2, and AEM-3멤브레인의 성공적인 제조 여부를 이온전도도(S/cm), 물함수율 (%), 접촉각, 이온교환능력 (m_eq/g), 열분석, SEM 및 XPS 분석 통하여 확인하였다. 또한, 제조된 가교 음이온 PVC멤브레인을 사용하여 유기전해질에서 전기화학 캐퍼시터 실험을 수행한 결과, 제조된 AEM-1, AEM-2 AEM-3 멤브레인의 경우 유기전해질에서 충/방전실험결과 매우 안정적임을 확인 할 수 있었다. 이러한 결과로 치환반응 후에 용매 캐시팅법으로 제조된 PVC기반 멤브레인 (AEM-1, AEM-2, 및 AEM-3)의 경우 유기전기화학캐퍼시터 (슈퍼캐퍼시터)용 분리막으로 사용될 수 있다.

• 공업화학
• /
• 제9권2호
• /
• pp.200-206
• /
• 1998

수면전개법에 의해 제조된 박막의 두께에 대한 고분자용액의 표면장력과 점도의 영향을 검토하였다. 수면에서 고분자용액의 전개는 고분자용액의 표면장력과 점도에 의해 지배되며, 수면전개 박막의 두께도 이들 인자의 영향을 받는다. 고분자의 농도가 증가함에 따라 고분자용액의 표면장력과 점도는 증가하였으며, 표면장력의 크기는 PVC>PS>CA이었고, 점도의 크기는 CA>PS>PVC 였다. 고분자용액의 수면전개시 물과 고분자용액의 표면장력의 차는 전개구동력으로 작용하나 고분자용액의 표면장력과 점도는 전개저항으로 작용하였다. 수면전개 박막의 두께에 대한 고분자용액의 점도영향이 표면장력에 의한 영향 보다도 더 컸으며, 수면 전개 박막의 두께는 PS>CA>PVC 순으로 두꺼웠다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 추계 총회 및 학술발표회
• /
• pp.46-51
• /
• 1993

Poly(vinyl chloride) was modified by reacting with sodium N-methyldithiocarbamate or N-methyl-N-carboxymethyldithiocarbamate to obtain crosslinked dithiocarbamated PVC(PMD, PSDC). In addition PSDC were substituted with metal ions of $Ma^+, Li^+$ and $Cs^+$. PLMD and PSDC were reacted with copper ions in alcohol or aqueous solution to produce chelate complexes of dithiocarbanated PVC, respectively(PMD-$Cu^{2+}$, PSDC-$Cu^{2+}$). PSDC was irradiated by ultraviolet light to enhance crosslinking(PSDC-UV).

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.298-305
• /
• 1998

The PVC membrane electrode for measuring perchlorate ion was developed by incorporating various quaternary ammonium sallts. The effect of chemical structure, the content of active material, the kind of plasticizers, and the membrane thickness on the electrode characteristic such as the linear response range and Nernstian slope of the electrode were studied. It was obtained that the effect of the chemical structure of an active material on the electrode characteristics was improved with increasing the alkyl chain length of the quarternary ammonium salts in the ascending order of Aliquat 336P, TOAP, TDAP, and TDDAP. The optimum membrane composition was 9.09wt% of TDDAP, 30.3wt% of PVC, and 60.6wt% of plasticizer(DBP). And the optimum membrane thickness was 0.45mm at this composition. Under the above condition, the linear response range was $10^{-1}~1.2\times10^{-6}$M, and the detection limit was $5.1\times10^{-7}$M with the Nernstian slope of 57mV/decade of activity of perchlorate ion. The electrode potential was stable within the pH range from 4 to 11. The selectivity coefficient was as shown below: $SCN^->I^-NO_3^->Br^->ClO_3^->F^->Cl^->SO_4^{2-}$

• 공업화학
• /
• 제9권5호
• /
• pp.734-741
• /
• 1998

본 연구에서는 전극전위 분석법을 사용하여 중성운반체로 dibenzo-18-crown-6(D18Cr6)와 valinomycin(Val)을 이용하여 $K^+$ 이온선택성 PVC막 전극의 막과 용액계면에서의 전극특성을 검토하였다. PVC막에서 감응물질(운반체)에 기본전해질의 혼입 (doping)여부, 감응물질의 종류와 함량, 가소제, 막두께 및 이온의 활동도변화에 따른 전극의 기울기, 선형응답범위 한계측정농도 및 방해이온에 따른 선택계수 등 전극특성을 검토하였다. 중성운반체로 D18Cr6, Val을 $K^+$ 이온으로 착체형성하여 사용하였고, 가소제로 dibutylphthalate(DBP), dioctyl sebacate(DOS) 및 dibutyl sebacate(DBS)를, 혼입제인 기본전해질로 potassium tetraphenylborate (KTPB) 및 용매로 THF를 지지체로 PVC를 이용하여 막을 제조하였다. 운반체의 최적 함량은 D18Cr6와 Val의 경우 3.23 wt %이었고, 가소제는 DBP가 가장 적절한 가소제이었다. 막두께에 대한 영향은 최적 막두께 이상에서는 막두께가 얇아질수록 전극특성이 좋아졌으나, 막두께가 이 이하로 얇아지면 운반체의 용출, 막의 강도 등이 작용하여 전극특성이 나빠짐을 알 수 있었다. D18Cr6의 경우 $K^+$ 이온에 대한 혼합용액법에 의한 선택계수 서열은 다음과 같았다: $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.

• Archives of Pharmacal Research
• /
• 제8권1호
• /
• pp.7-14
• /
• 1985

Membrane-coated tablet of isonicotinic acid hydrazide (INAH) which releases INAH at the zero-order kinetics was deveoped. It consisted of a soluble tablet core surrounded by a porous membrane which controls the diffusion rate. Tablet cores were prepared by compressing granules of INAH and polyvinyl chloride (PVC) dissolved in methyl ethyl ketone in which micronized sucrose were suspended. Diffusion rate of INAH from the tablet through the membrane was constant until the loaded INAH in the core was almost released. The rate was independent of pH of the dissolution medium. Water-soluble sucrose particles behaved as a poreproducing material in the water-insoluble PVC film coat. The pH independency of the rate was probably due to the high solubility of INAH in the water of wide pH range. The diffusion rate of INAH could be controlled by chnaging the composition of the membrane or the coat weight. This membrane-coated INAH tablet seemed to be a powerful candidate for the controlled release drug delivery system (DDS) of INAH or other highly watersoluble drugs.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1581-1586
• /
• 2006

A La (III) ion-selective membrane sensor has been fabricated from poly vinyl chloride (PVC) matrix membrane, containing 3-hydroxy-N'-(pyridin-2-ylmethylene)-2-naphthohydrazide (HPMN) as a neutral carrier, potassium tetrakis (p-chlorophenyl) borate (KTpClPB) as an anionic excluder and ortho-nitrophenyloctyl ether (NPOE) as a plasticizing solvent mediator. The effects of membrane composition and pH as well as the influence of the anionic additive on the response properties were investigated. The sensor with 30% PVC, 62% solvent mediator, 6% ionophore and 2% anionic additive, shows the best potentiometric response characteristics. It displays a Nernstian behavior (19.2 mV per decade) across the range of $1.0{\times}10^{-2}-1.0{\times}10^{-7}$ M. The detection limit of the electrode is $7.0{\times}10^{-8}$ M ($\sim$10 ng/mL) and the response time is 15 s from $1.0{\times}10^{-2}$ up to $1.0{\times}10^{-4} $M and 30 s in the range of $1.0 {\times}10^{-5}-1.0{\times}10^{-7}$ M. The sensor can be used in the pH values of 3.0-9.0 for about seven weeks. The membrane sensor was used as an indicator electrode in the potentiometric titration of lanthanum ions with EDTA. It was successfully applied to the lanthanum determination in some mouth wash preparations.

• Archives of Pharmacal Research
• /
• 제13권2호
• /
• pp.151-160
• /
• 1990

In order to develop a controlled-release oral drug delivery system (DDS) which sustains the plasma acetaminophen (AAP) concentration for a certain period of time, microporous membrane-coated tablets were prepared and evaluated in vitro. Firstly, highly water-soluble core tablet of AAP were prepared with various formulations by wet granulation and compression technique. Then the core tablets were coated with polyvinychloride (PVC) in which micronized sucrose particles were dispersed. Effect of formula compositions of core tablets and coating suspensions on the pharmaceutical characteristics such as drug release kinetics and membrane stability of the coated tablets was investigated in vitro. AAP was released from the coated tablets as a zero-order rate in a pH-independent manner. This independency of AAP release to pH change from 1.2 to 7.2 is favorable for the controlled oral drug delivery, since it will produce a constant drug release in the stomach and intestine regardless of the pH change in the GI tract. Drug release could be extended upto 10 h according to the coating condition. The release rate could be controlled by changing the formula compositions of the core tablets and coating suspensions, coat weight per each tablet, and especially PVC/sucrose ratio and particle size of the sucrose in the coating suspension. The coated tablets prepared in this study had a fairly good pharmaceutical characteristics in vitro, however, overall evaluation of the coated tablet should await in vivo absorption study in man.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.71-74
• /
• 2006

The introduction of materials and methods of construction which are appropriated to property of green roofs could be a decisive factor in a long-range durability and economical maintenance cost, moreover, it support to variety construction system and organization. In this paper I focused to assure the basic system for waterproofing materials and root barrier apply to green roof as searching the application of field condition. And I suggest proper waterproofing and root barrier as considering the mutual connection and plant growth. and it can be a standard model to adopt to domestic green roof system.