• 제목/요약/키워드: PVC membrane

검색결과 169건 처리시간 0.024초

Poly(vinyl chloride) 유도체로부터 제조된 바이오센서용 고분자막의 기체 투과특성 (Gas Permeation Properties of Polymeric Membranes for Biosensor Prepared from Poly(vinyl chloride) Derivatives)

  • 임춘원;김완영;이연식;윤정원;정용섭
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.362-366
    • /
    • 1999
  • Poly(vinyl chloride) (PYC) 유도제들로부터 용매증발법을 이용하여 바이오센서용 막을 제조하고 기체 투과특성을 조사하였다. 진공하에서 용매를 증발시켜서 제조된 막보다 공기 중에서 서서히 증발시켜 제조된 막의 투과도 계수가 더 높은 것으로 나타났다. PVC 유도체 막들에 대한 $CO_2$$O_2$의 투과도 계수는 공급부의 압력이 증가함에 따라 감소하였다. Carboxylated poly(vinyl chloride) (CPVC) 에 대한 dioctyl phthalate (DOP)의 첨가량이 증가함에 따라 투과도 계수는 증가하였다. 예를 들면 DOP 30 wt. %를 첨가하였을 때, $CO_2$$O_2$의 투과도 계수는 100 psig에서 각각 2.03, 0.96 Barrer 이었으며, DOP를 첨가하지 않았을 때 보다 약 4~5배 증가하였다. Poly(vinyl chloride-co-vinyl acetate) (PVCA)를 가수분해함으로써 OH기가 도입된 poly(vinyl chloride-co-vinyl acetate-co-vinyl alcohoI) (Syn-PVCAcAl)에 DOP를 첨가하였을 때 $CO_2$의 투과도 계수에서 시판제품 PVCAcAl보다 비교적 높은 값을 나타내었으나, $O_2$의 투과도 계수에는 차이가 없었다.

  • PDF

용매 고분자막 상에 고정된 나트륨 이온선택성 물질의 착물형성상수 결정 (Determination of Complex Formation Constant of Sodium-Selective Ionophores in Solvent Polymeric Membranes)

  • 강태영;김성배;오현준;한상현;차근식;남학현
    • 분석과학
    • /
    • 제13권4호
    • /
    • pp.466-473
    • /
    • 2000
  • 용매고분자막 상에 칼륨과 다양한 나트륨이온 선택성 중성 운반체의 착물형성상수(${\beta}_{MLn}$)를 고분자막형 광센서(optode)와 이온선택성 전극(ISE)을 이용하여 결정하였다. 수소이온선택성 발색물질(chromoionophore : ETH 5294)에 가장 널리 쓰이는 나트륨 이온선택성 물질들(4-tert-butylcalix[4]arenetetraacetic acid tetraethyl ester, ETH 2120, bis[(12-crown-4)methyl] dodecyl-methylmalonate 및 monensin methyl ester)을 첨가한 막과 첨가하지 않은 막으로 두 가지 다른 조성의 PVC 막을 제작하여, 일정 pH(0.05 M Tris-HCl, pH7.2)에서 알칼리금속 양이온(나트륨과 칼륨)의 농도 변화에 따른 광학적 감응을 측정하고, 또 일정한 알칼리금속 양이온 농도(0.1M)에서 pH변화에 따른 광학적 감응을 측정하였다. 또한 유사한 조성의 막을 각각 재래식 전극체에 장착하고 일정한 알칼리금속 양이온의 농도(0.1M)에서 pH 변화에 따른 전위치를 측정하였다. 양이온/수소이온의 활동도 비($a_{M^+}/a_{H^+}$)와 상대흡광도로 도시한 광센서 감응곡선과 수소이온농도에 따른 전위차 감응곡선으로부터 나트륨 이온선택성 리간드들의 착물형성상수를 결정하였다. 목적이온과 방해이온에 대한 착물형성상수들의 비로부터 얻어진 값은 실험적으로 얻어진 이온선택성 전극의 선택계수와 근접함을 확인하였다.

  • PDF

EM Radioautographic Techniques에 관(關)한 연구(硏究) - Cork 방법(方法) - (An Improved Method for EM Radioautographic Techniques using Cork)

  • 김명국
    • Applied Microscopy
    • /
    • 제10권1_2호
    • /
    • pp.7-17
    • /
    • 1980
  • Electron microscope radioautography introduced by Liquier-Milward (1956) is now used routinely in many laboratories. Most of the technical difficulties in specimen preparation have been overcome. This method is modified from loop method for improvement of EM radioautographic techniques. The advantages of this method are: 1. the use of single specimens on small corks and of a large wire loop, allows the experimenter to avoid the blemishes in the membrane; 2. the surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4, thus greatly prolonging the period of time over which good emulsion layers can be made; 3. corks can be handled in perspex holder which allows about 20 specimens to be developed simultaneously. The steps of the method comprise: 1. Cut ribbons of ultrathin sections of silver interference colour 2. Pick them up on formvar-coated 200 mesh grids 3. Prestaining of tissues 4. Coat the specimens with a thin layer of carbon by evaporation (30-60A) 5. Mount the specimens on corks (about 1cm apical diameter) using double-sided scotch tape 6. Emulsion coating; a. Take a 250m1 beaker, place it on the pan of a sliding weight balance and weigh it. Add 10 grams extra to the beam. Add pieces of ILford L4 emulsion to the beaker until the balance is swinging freely. Add the 20ml of distilled water that was previously measured out. b. Surfactant dioctyl sodium sulphosuccinate is added to diluted ILford L4. 7. Prepare a series of membranes of gelled emulsion with the wire loop and apply one to each cork-borne specimen. 8. Put the specimens away to expose by pushing the corks into short length of PVC tubing, each tube having a small hole in the side 9. Place the tubes in small boxes together with silica gel. 10. Exposure 11. Developer - Kodak Microdol X for 3 minutes 12. Fixer - A perspex holder can be manufactured which allows 20 specimens to be developed simultaneously. 12. Fixer - 30% sodium thiosulfate for 10 minutes 13. Examination with Siemens Elmiskop 1A electron microscope

  • PDF

저온플라즈마 처리에 의한 실리콘코팅 막구조 원단의 특성변화 (Properties of Silicon Coated Fabric for Membrane Treated by Low Temperature Plasma)

  • 박법;이장훈;구강
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2011년도 제44차 학술발표회
    • /
    • pp.60-60
    • /
    • 2011
  • 막구조는 근래에 와서 대공간 구조 및 지붕구조에 가장 보편적으로 사용되는 경량 인장 구조물로 각광받고 있다. 구조용 막재는 풍하중 및 설하중에 충분히 감당할 수 있도록 강도와 내구성을 가지고 있어야 한다. 일반적으로 막구조 재는 PVC코팅 폴리에스터막, 실리콘코팅 유리섬유막, PTFE코팅 유리섬유막이 있다. 제직되는 원단의 크기가 한정되어 있기 때문에 재단 후 접착하여 제작한다. 이 때문에 이음부분이 나 재단부분에 코팅으로 인한 접착이 어려워 고온고압으로 접착을 한다. 이 연구에서는 실리콘코팅 유리섬유막의 접착시 어려움을 보완하기 위해 저온 Plasma를 이용한 처리법으로 방전에 의해 Plasma를 발생시켜 50w, 100w 출력으로 10분, 20분간 처리하여 그 결과를 접촉각과 SEM 관찰을 통해 표면처리를 관찰하였다. Plasma 처리로 인해 실리콘 표면층에 균열이 발생하고 표면이 갈라짐을 확인할 수 있었다. 접촉각측정 결과 Plasma 출력과 시간의 증가함에 따라 접촉각은 감소하였다. 실리콘코팅 원단에 저온 Plasma 처리한 후 표면 특성을 분석하고 원단을 접착을 시켜 박리 강도를 측정함으로써 막구조 원단의 접착력 향상에 대한 연구를 진행하였다. KS K 0533 접착포의 박리 강도 시험방법으로 실리콘코팅 원단의 박리 강도를 측정한 결과 플라즈마 처리 원단이 플라즈마 미처리 원단보다 박리 강도가 향상된 것을 확인할 수 있었다. 저온 Plasma 처리 시간이 증가할수록 표면의 젖음성을 향상시켜 접촉각을 낮추었다. 이는 곧 표면에너지의 증가를 뜻하는 것으로 접착력을 증가시켜 실리콘코팅 원단의 접착성을 시킴으로써 강한 강도와 내구성을 갖춘 막구조물의 개발에 기대되고 있다.

  • PDF

Effect of Distribution System Materials and Water Quality on Heterotrophic Plate Counts and Biofilm Proliferation

  • 장영철;정권
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권6호
    • /
    • pp.1114-1119
    • /
    • 2004
  • The biofilms on pipe walls in water distribution systems are of interest since they can lead to chlorine demand, coliform growth, pipe corrosion, and water taste and odor problems. As such, the study described in this paper is part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different source waters on the water quality in various distribution systems. The project was based on 18 independent pilot distribution systems (PDS), each being fed by a different water blend (7 finished waters blended in different proportions). The source waters compared were groundwater, surface water, and brackish water, which were treated in a variety of pilot distribution systems, including reverse osmosis (RO) (desalination), both membrane and chemical softening, and ozonation-biological activated carbon (BAC), resulting in a total of 7 different finished waters. The observations from this study consistently demonstrated that unlined ductile iron was more heavily colonized by a biomass than galvanized steel, lined ductile iron, and PVC (in that order) and that the fixed biomass accumulation was more influenced by the nature of the supporting material than by the water quality (including the secondary residual levels). However, although the bulk liquid water cultivable bacterial counts (i.e. heterotrophic plate counts or HPCs) did not increase with a greater biofilm accumulation, the results also suggested that high HPCs corresponded to a low disinfectant residual more than a high biofilm inventory. Furthermore, temperature was found to affect the biofilms, plus the AOC was important when the residual was between 0.6 and 2.0 mg $Cl_2/l$. An additional aspect of the current study was that the potential of the exoproteolytic activity (PEPA) technique was used along with a traditional so-called destructive technique in which the biofilm was scrapped off the coupon surface, resuspended, and cultivated on an R2A agar. Both techniques indicated similar trends and relative comparisons among the PDSs, yet the culturable biofilm values for the traditional method were several orders of magnitude lower than the PEPA values.

Tetrahydrofuran-Containing Crown Ethers as Ionophores for NH+4-Selective Electrodes

  • Jin, Hua-Yan;Kim, Tae-Ho;Kim, Jin-Eun;Lee, Shim-Sung;Kim, Jae-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권1호
    • /
    • pp.59-62
    • /
    • 2004
  • The ammonium ion-selective electrodes ($NH^+_4$-ISEs) based on the tetrahydrofuran(THF)-containing-16-crown-4 derivatives,1,4,6,9,11,14,16,19-tetraoxocycloeicosane ($L^1$) and 5,10,15,20,-tetramethyl-1,4,6,9,11,14,16,19-tetraoxocycloeicosane ($L^2$), were prepared and the electrode characteristics were tested. The conditioned $NH_4^+$-ISEs (E1) based on $L^1$ with TEHP as a plasticising solvent mediator gave best results with near-Nernstian slope of 53.9 mV/decade of activity, detection limit of $10^{-4.9}$ M, and enhanced selectivity coefficients for the $NH^+_4$ ion with respect to an interfering $K^+$ ion (log $K^{pot}_{NH_4^+,K^+}$ = -1.84). This result was compared to other ammonium ionophores reported previously, for example, that of nonactin (log $K^{pot}_{NH_4^+,K^+}$ = -0.92). The proposed electrode showed no significant potential changes in the range of 3.0 < pH < 9.0.

Bis(2-ethylhexyl) phthalate가 in vitro에서 식물 토양병원성 세균 Pectobacterium carotovorum에 미치는 영향 (Effects of bis(2-ethylhexyl) phthalate(DEHP) on plant soil-borne pathogenic bacterium Pectobacterium carotovorum in vitro)

  • 김유리;김상태;상미경
    • 환경생물
    • /
    • 제40권4호
    • /
    • pp.398-404
    • /
    • 2022
  • 본 연구는 플라스틱 가소제인 DEHP가 식물 병원균 중 하나인 P. carotovorum SCC1 균주에 미치는 영향을 조사하였다. DEHP가 균주 생장과 대사에 미치는 영향을 조사한 결과, 개체군 변화에 유의한 영향을 주지 않았으며, 세포막 투과성, ATPase 활성에 유의한 변화가 없었지만 TCA cycle 에서 DEHP 첨가에 따라 Succinyl-CoA synthase 활성이 유의적으로 감소하였다. 병원성 관련 유전자 발현량을 관찰한 결과 pectate lyase 유전자 발현량이 상대적으로 증가한 반면, pectinase 유전자는 상대적으로 발현량이 감소하였다. 따라서 DEHP는 P. carotovorum SCC1의 개체군 변화나 대사에는 유의미한 영향을 미치지 않지만 병원성 관련 유전자 발현에 영향을 미치므로 본 연구 결과는 향후 실제 식물 재배 조건에서 DEHP가 존재할 때 P. carotovorum의 특성에 관한 기초연구 자료로 활용할 수 있을 것이라 사료된다.

돈사 분진 함유 내독소 수준과 축사 작업자들의 세포면역력간 상관성 분석 (Relationship between Endotoxin Level of in Swine Farm Dust and Cellular Immunity of Husbandry Workers)

  • 김형아;김지연;신경민;조지훈;;조광호;허용
    • 한국산업보건학회지
    • /
    • 제23권4호
    • /
    • pp.393-401
    • /
    • 2013
  • Objectives: Endotoxins in dust generated in occupational settings is known to contribute to the occurrence of respiratory illness among workers. The relationship between the level of endotoxins in total dust or respirable particulates collected from swine farms and immunological markers related with respiratory allergy was evaluated among swine husbandry workers. Materials and Methods: Peripheral blood samples were collected from ten workers at ten swine farms at Gyeonggi province, Korea. Peripheral mononuclear cells were stimulated with phorbol 12-myristate 13-acetate and ionomycin for 48 hours. The levels of various cytokines produced at culture supernatants were determined using a commercially available ELISA kit. The concentration of particulate matter($PM_{10}$) in the indoor air of the swine farms was evaluated using a PVC membrane filter and mini volume air sampler, and endotoxin levels in the dust were measured by Limulus Amebocyte Lysate Kinetic QCL method. Results: Levels of endotoxins in the total dust were categorized into high(geometric mean: $109.35EU/m^3$) and low concentrations (geometric mean: $0.95EU/m^3$) for five swine farms. Interleukin-4 levels were higher in the high endotoxin group than in the low endotoxin group, while interferon-${\gamma}$ levels were lower in the high endotoxin group than in the low endotoxin group. The ratio (interferon-${\gamma}$ to interleukin-4), indicating immunologic skewedness against allergic reactivities, was lower in the high endotoxin group($1.15{\pm}0.60$) than the low endotoxin group($3.09{\pm}2.38$). In addition, the level of interleukin-13, another cytokine contributing to the occurrence of allergic responses, was significantly higher in the at the high endotoxin group($1.12{\pm}0.37ng/m{\ell}$) than in the low endotoxin group($0.37{\pm}0.04ng/m{\ell}$). Hematologic assessment showed significantly lower cellularity in the number of total leukocytes, neutrophils, and eosinophils in the high endotoxin group than in the low endotoxin group. Conclusions: Even though a sufficient number of swine workers and farms were not investigated, this study generlly suggests that the immunological function of swine farm workers exposed to high levels of endotoxin could be modulated toward allergic reactivities.

Crown Ether를 이용한 탐침형 납 이온선택성 전극 (Coated Wire Lead(Ⅱ) Ion-Selective Electrodes based on Crown Ethers)

  • 장미경;하광수;서무룡
    • 대한화학회지
    • /
    • 제41권7호
    • /
    • pp.337-342
    • /
    • 1997
  • 본 연구에서는 benzo-15-crown-5(B15C5)와 poly(acryloylmethylbenzo-15-crown-5)[poly(AMB15C5)] 화합물을 이온선택성 물질로 이용해서 $Pb^{2+}$를 전위차법으로 정량할 수 있는 탐침형 이온선택성 전극(coated wire-ion-selec-tive electrode[CWISE])을 개발하였다. 각각 감지막의 최적 조성은 B15C5의 경우에는 리간드 20 mg, 가소제인 tris(2-ethylhexyl) ester 165 mg, 지지체인 polyvinylchloride 75 mg 및 용매인 THF 0.7 mL이었으며 poly(AMB15C5) 경우에는 리간드 35 mg, 가소제인 tris(2-ethylhexyl) ester 160 mg, 지지체인 PVC [Polyvinyl Chloride] 70 mg 및 용매인 THF 2 mL이었다. 이 때 코팅용액의 리간드에 대한 무게함량은 각각 7.7%와 13.1%이었다. 각각의 전극은 $10^{-5} M{\sim}10^{-1}$ M 농도 범위에서 기울기가 28{\pm}1$ mV/decade인 직선성이 잘 성립하는 감응을 나타내었다. 또한 전극의 감응시간은 poly(AMB15C5) 경우에는 5분 이내였으며 B15C5의 경우에는 3분이내로 비교적 빠른 편이었다. 전극의 안정성은 크라운 에테르의 물에 대한 용해도 때문에 좋은 편은 아니었다. 최적 pH 조건은 pH 3~6이었으며 $Mg^{2+},\; Ca^{2+},\; Co^{2+},\; Ni^{2+},\; Cu^{2+},\; Zn^{2+}$$Cd^{2+}$는 방해가 거의 없었으나 $Na^+$$K^+$는 방해효과가 컸다. 그리고 본 연구에서 제조한 탐침형 이온선택성 전극을 이용하여 $Pb^{2+}$ 이온을 전위차 적정법으로 정량분석해 보았을 때 이론적인 당량점과 종말점이 잘 일키하는 결과를 얻었다.

  • PDF