• 폴리머
• /
• 제36권1호
• /
• pp.71-75
• /
• 2012

본 연구는 폴리(비닐 알코올)(PVA) 하이드로젤 안에 $AgNO_3$ 용액을 이용하여 은 나노입자(AgNPs)를 제조하였다. PVA 입자를 증류수에 용해시킨 후, 50 kGy 감마선을 조사하여 PVA 하이드로젤을 제조하였다. 감마선을 이용하여 제조된 PVA 하이드로젤을 0.01, 0.05 M 질산은 수용액에 1시간 동안 침지후, 팽윤된 하이드로젤을 꺼내 감마선을 재조사하여 PVA 하이드로젤 내부에 AgNPs를 제조하였다. AgNPs가 함유된 PVA 하이드로젤의 UV 흡수 특성 및 FE-SEM 측정 결과, 감마선 조사량이 증가할수록 AgNPs의 생성이 증가하는 것을 확인할 수 있었으며, 같은 조사량에서 $AgNO_3$ 용액의 농도가 클수록 AgNPs 생성이 증가하였다. 액체배지 및 고체배지를 이용하여 그람 음성 세균인 E.coli와 S.aureus에 대한 PVA 하이드로젤에 생성된 AgNPs의 항균 실험 결과 매우 우수한 항균 효과를 나타냈다.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.48-53
• /
• 1998

Chitin is known as biodegradable natural polymer. But, in spite of various application of chitin from waste marine sources, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. We made various viscosity of chitosan from chitin by change of Mima's method through the deacetylation which is various condition of NaOH concentration, reaction time and temperature. Also, Polyvinyl alcohol/chitosan blend films were prepared by different solution blends containing the ratio of 5, 10, 15 and 20% chitosan and low, medium, high molecular weight of chitosan to find a more useful biodegradable polymer. Thermal and mechanical properties of PVA/chitosan blend films such as DSC, impact strength, tensile strength and morphological changes by SEM were determined. The 10-15% PVA/chitosan(low, medium) blend films were similar to PVA. Also, PVA/chitosan blend films at the laboratory soil test(Pot Test) were completely degraded in month with four kinds of soils by microorganisms.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.32-37
• /
• 2001

Silk fabric was sputter-treated with Au, Cu, SUS, and Ti using poly(vinyl alcohol) (PVA) as a binder, and its changes in color, antielectrostatic property, airpermearbility, and rubbing fastness were investigated. Sputter-treated silk fabric had a natural color of metal target, which was deepened by treatment of PVA solution. The rubbing fastness of thin metal layer formed by sputtering was improved by PVA treatment. Au had highest rubbing fastness among the metal targets. In addition, PVA treatment posterior to sputtering resulted In higher rubbing fastness than the other treatment method. However, a reverse trend was found in antielectrostatic property. Air permeability of the sputter-treated silk fabric was improved by PVA treatment, which was highest when sputtering was conducted prior to PVA treatment.

• 멤브레인
• /
• 제23권2호
• /
• pp.170-175
• /
• 2013

지지체인 Polyacrylonitrile (PAN) 중공사에 Poly (vinyl alcohol) (PVA)과 가교제인 Glutaraldehyde (GA)를 코팅하여 막을 제조하였으며, 특성평가를 위해 물/Isopropyl alcohol (IPA) 혼합액에 대한 투과증발 실험을 수행하였다. 코팅용액의 조성변화와 반응온도의 조건변화에 따른 투과도 및 선택도를 측정하였고, 공급액의 조성은 85 wt% IPA 수용액을 사용하였으며, 온도는 30, 50, 70, $90^{\circ}C$로 변화시켰다. 투과도는 PVA 3.5 wt%, 공급액 온도가 $90^{\circ}C$일 때 1,870 $g/m^2{\cdot}hr$, 선택도는 PVA 7 wt% 공급액 온도가 $30^{\circ}C$일 때 804로 가장 높은 값을 얻을 수 있었다.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.363-369
• /
• 2019

This study developed electroconductive textiles by coating polypyrrole to PET nonwoven-based Polyvinyl Alcohol (PVA) nanoweb made by electrospinning and applying the developed electrotextiles as ECG Electrodes. To find the optimum coating conditions for high electrical conductivity, the ratios of 2.6-Naphthalenedisulfonic acid with Disodium Salt (NDS) vs Ammonium Persulfate (APS) as an oxidant and a doping agent in the solution were changed from 3:7 to 7:3; the immersion time of the specimen in the solution was 1 hour. PVA nanowebs coated with polypyrrole under various conditions were filmed with FE-SEM. FT-IR analysis was also performed to examine the presence of polypyrrole nanoparticles in the PVA nanoweb. The electrical resistance of the treated specimens were measured with a Multimeter. Consequently, the PVA Nano Web was undamaged even after heat treatment that allowed for coating. Uniform polypyrrole nanoparticles then formed on the surface of the PVA nanoweb after coating. The measured electrical resistance was shown to be at least $12K{\Omega}/{\Box }$ from a maximum of $3,456K{\Omega}/{\Box }$. The proper amount of NDS content had a positive effect on the conductivity improvement of electroconductive textiles; in addition, the highest electrical conductivity was achieved with a ratio of 3:7 between NDS and APS.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.663-669
• /
• 2004

Mullite와 cordierite는 우수한 열적, 화학적 특성을 나타내는 안정된 산화물로서 다양한 구조재료 및 전자재료에 사용되어지고 있으나, mullite의 경우 내열충격성이, cordierite의 경우 고온강도가 떨어지는 단점이 있다. 이와 같은 단점을 서로 보완하기 위한 mullite-cordierite 복합체에 대한 연구가 진행되고 있다 본 연구에서는 fused silica, aluminium nitrate, magnesium nitrate와 PVA의 혼합을 이용한 solution-polymerization 합성법에 의해, mullite-cordierite복합분말을 합성하고 생성상 및 결정성, 밀도 및 비표면적 등의 특성을 분석하였다 그 결과, 본 실험의 모든 조성에서 있어서 130$0^{\circ}C$로 열처리하였을 경우, mullite와 cordierite의 상이 공존하는 복합분말이 생성되는 것을 확인할 수 있었다. 이 mullite-cordierite복합 분말을 planetary milli로 1시간 분쇄하였을 때 비표면적은 약 20 $m^2$/g로서 미립의 분말이 확인되어졌고, 분쇄시간의 증가에 따라 4시간에서는 23$m^2$/g, 8시간에서는 24$m^2$/g로 비표면적이 증가하였다.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.323-327
• /
• 2006

Poly(vinyl alcohol) (PVA)/multi-walled carbon nanotube (MWNT) composite films were prepared by casting a DMSO solution of PVA and MWNTs, whereby the MWNTs were dispersed by sonication. A significant improvement in the mechanical properties of the PVA drawn films was achieved by the addition of a small amount of MWNTs. The initial modulus and the tensile strength of the PVA drawn film increased by 30 % and 45 %, respectively, with the addition of 1 wt% MWNTs, which are close to those calculated from the rule of mixtures, and were strongly dependent upon the orientation of the PVA matrix. The mechanical properties, however, were not improved with a further increase in the MWNT content. The orientation of MWNTs in the composite was not well developed compared to that of the PVA matrix. This result suggests that the improvement of the molecular orientation of the PVA matrix plays a major role in the increase of the mechanical propeties of the drawn PVA/MWNT composite films.

• 한국포장학회지
• /
• 제5권2호
• /
• pp.1-8
• /
• 1999

The state of compatability of poly(vinyl alcohol)(PVA) and methyl cellulose(MC), prepared by an aqueous solution casting, were investigated over the entire compositions by dynamical mechanical analyzer(DMA) and differential scanning calorimetry(DSC). The glass transition temperatures of the blends, estimated by DMA, indicate that the blends of PVA and MC showed a definite degree of partial miscibility by showing two glass transition temperatures below 80 wt % MC contents in the blends and one glass transition temperature above 80 wt % of MC contents. The DSC results show a depression of melting point and crystallization temperature of PVA in the blends containing more than 80 wt % MC. This indicates that a considerable compatibility in the blend above 80 wt % MC contents may be attribute to the presence of interaction of hydroxyl groups of component polymers through hydrogen bonding. The DMA study of the effect of plasticizer on the polymers showed that water was a good plasticizer for PVA and PEG400 for MC. The addition of water and PEG400 in the blends showed a synergic plasticizing effect on these blends, which resulted in the large extent of the improvement of the compatibility. The elongation of PVA, MC and blonds was found to increase with addition of PEG400 in the blends, but the tensile strength to decrease with addition of plasticizer.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.39-45
• /
• 2009

PVA films were crosslinked with dimethylol dihydroxy ethylene urea (DMDHEU) and three polycarboxylic acids of butanetetracarboxylic acid (BTCA), citric acid and malic acid Different factors influencing the crosslinking treatment with BTCA were investigated including BTCA and sodium hypophosphite (SHP) concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated based on weight change of the PVA films. The gel fraction of PVA films increased with increasing curing temperature and time. And the resistance to water and thermal stability of the crosslinked PVA films improved with the BTCA crosslinking treatment. While crosslinking with citric acid gave the highest gel fraction among the crosslinkers, crosslinking with malic acid showed the highest absorbancy in 0.9% saline solution, which was attributed to lower crosslink density and high number-average molecular weight between crosslinks. The superabsorbent PVA films could be prepared by adjusting the crosslinking condition of PVA with polycarboxilic acids.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.130-137
• /
• 2023

이 연구는 다중벽 탄소나노튜브(MWCNTs) 혼입 PVA 섬유보강 시멘트 복합체에서 배합 순서에 따른 영향을 분석하기 위해 배합 순서를 변수로 고려한 실험을 통해 유동성, 압축 및 휨인장 성능을 분석하였다. 실험 결과, CNT 혼입으로 인하여 유동성이 크게 감소하였으며, CNT가 혼입된 경우 배합 순서에 따라 유동성이 크게 영향을 받는 것으로 나타났다. 압축 강도는 물과 CNT 수용액을 미리 섞어 혼입한 후 PVA 섬유를 혼입하는 순서가 가장 강도 증진 효과가 뛰어난 것으로 나타났으며, 휨인장강도는 건비빔 후 물과 CNT 수용액, PVA 섬유를 미리 섞은 후 배합한 방식이 가장 높은 것으로 나타났다. 다만, 휨인장 거동에서 연성도는 배합 순서와의 연관성이 명확하게 나타나지 않았다. 또한, 미세구조에의 영향을 분석하기 위해 주사전자현미경(SEM) 이미지 분석을 수행하였다. SEM 이미지 분석 결과, 모든 시편에서 CNT가 골고루 분산되어 분포하고 있는 것으로 나타나 CNT가 강도 증진 효과에 기여하고 있는 것을 확인할 수 있었으나, 배합방식으로 인한 차이는 명확하게 나타나지 않았다. 이 연구의 주요 결과는 향후 CNT 혼입 PVA 섬유보강 시멘트 복합체의 작업성 및 재료성능 평가 관련 연구에 유용할 것으로 기대된다.