• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.403-406
• /
• 2007

A New S-PVA which is named as charge-shared super PVA (CS S-PVA) LCD mode is proposed. CS SPVA controls the voltage ratio of low pixel by sharing system between low pixel and control cap, resulting in improved off-axis image quality and transmittance increase without any side effects. Moreover, the new S-PVA LCD mode is free of image-sticking. Operating schemes and display performance of CS S-PVA are presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.437-438
• /
• 2008

The Conventional patterned vertical alignment (PVA) device shows a very high contrast ratio at normal direction and does not require rubbing process. However it has a disclination area in which the liquid crystal can be collision in the boundary domain region. In this paper, we studied PVA(Z-shape) device in which the liquid crystal can be tilted down in multiple directions stably because the surface pretilt angle is controlled by photopolymerization of the UV - curable reactive mesogen (RM) under a proper condition. Consequently, the device shows improved electro optical properties as compared to conventional PVA mode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.502-505
• /
• 2007

In this paper we propose a novel electrode structure for high transmittance in the Patterned Vertical Alignment (PVA) LC cell. Normally, the transmittance of PVA LC cell is depended on the shape of the electrode and cell gap. We studied the area decreasing the transmittance through the electrode structure for wide viewing angle and proposed new electrode design to change LC director configuration in the area. We use the 'TechWiz LCD' for calculation of the director configuration and optical characteristics. We show the comparison of the calculated optical transmittance between the conventional PVA mode and the proposed PVA mode. From the results, we confirm that the optical transmittance of the proposed structure of the PVA cell becomes higher.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.320-323
• /
• 2008

In this paper, electro-optical characteristic of Nematic Liquid crystal (LC) with varying temperature in different LCD modes, namely Fringe Field Switching (FFS), In-plane switching (IPS), and Patterned Vertical Alignment (PVA) modes are investigated and compared. Electro optic me asurements suggest that rate of change of transmission with temperature in FFS mode was lowest and much more thermally stable as compared to IPS and PVA m odes. However the electro-optical characteristic of patterned vertical alignment (PVA) mode was most affected by changing temperature. The measured threshold voltage was found to be much more thermally stable in FFS and IPS modes than that of PVA mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1724-1728
• /
• 2007

In this paper we propose a novel electrode structure for high transmittance in the Patterned Vertical Alignment (PVA) LC cell. We use the 'TechWiz LCD' for calculation of the director configuration and optical characteristics. We studied the area decreasing the transmittance through the electrode structure for wide viewing angle and proposed new electrode design to change LC director configuration in the area. We show the comparison of the calculated optical transmittance between the conventional PVA mode and the proposed PVA mode. From the results, we confirm that the optical transmittance of the proposed structure of the PVA cell becomes higher.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.43-44
• /
• 2006

We have studied effect of Patterned Vertical Alignment (PVA) mode on electro-optical characteristics and stability of liquid crystal director upon electrode pattering. In the present studies, LC director field and stability of conventional PVA mode electrode patterns were analyzed and new type of electrode patterns were suggested. At last, comparison between this new type of electrode patterns to conventional electrode pattern types were followed.

• Journal of Information Display
• /
• v.8 no.3
• /
• pp.17-21
• /
• 2007

We introduce a new electrode structure for the patterned vertical alignment (PVA) mode, which has a lower color-shift at large viewing angle than the one-domain VA mode. By manipulating the period of electrode structure, we can make more multi-domains and use the existing fabrication processes without having to use additional materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.172-172
• /
• 2010

The Patterned vertical alignment (PVA) mode has many advantages such as perfect dark state at the normal direction and wide viewing angle. However, PVA mode needs additional process to pattern electrodes of both substrates and complicated assembly process. Moreover, this mode shows slow response time. To overcome these problems, we use plane shape ITO on top substrate instead of patterned electrode and form proper tilt angle of LC director on the surface while maintaining these original merits. Consequently, we achieve fast response time and improve transmittance.