• 멤브레인
• /
• 제18권1호
• /
• pp.44-52
• /
• 2008

본 연구는 poly(vinyl alcohol) (PVA)와 가교제 poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA)을 이용하여 제조된 막에 tetraethylorthosilicate (TEOS)를 도입하여 물-에탄올 계에 대한 투과증발 실험을 다양한 가교온도별($120{\sim}140^{\circ}C$), 조업온도별($25{\sim}70^{\circ}C$)로 수행하였다. TEOS의 함량은 PVA 대비 3, 5, 7 wt%를 사용하였으며, 원액의 조성은 무게비로 물 10, 20, 30 및 50%에 대하여 조사하였다. 물 에탄올 = 10 : 90 조성, 조업온도 $50^{\circ}C$에서 선택도 1730과 투과도 $16.3g/m^2{\cdot}hr$를 PVA/7 wt% PSSA_MA/5 wt% TEOS 막이 보여 주었다.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.412-417
• /
• 2007

In the present study, crosslinked poly(vinyl alcohol) (PVA) membranes were prepared at different temperatures using poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA) (PVA:PSSA_MA = 1:9). The hybrid mem-branes were prepared by varying the TEOS content between 5 and 30 wt%. The PSSA_MA was used both as a crosslinking agent and the hydrophilic group donor ($-SO_3H$ and/or-COOH). The proton conductivity increased with up to 20 wt% TEOS, but decreased above this level, although the water content decreased with increasing TEOS content. This result suggests that the silica doped into the membrane improved the formation of proton-conduction pathways due to the absorption of molecular water. The PVA/PSSA_MA/Silica containing TEOS 20% showed both high proton conductivity (0.026 S/cm at $90^{\circ}C$) and low methanol permeability ($5.55{\times}10^{-7}cm^2/s$).

• 대한화학회지
• /
• 제55권6호
• /
• pp.1024-1029
• /
• 2011

PVA/silica hybrid xerogels were synthesized by sonohydrolysis of a mixture of 2-way catalyzed TEOS and water solution of PVA. PVA was successfully removed from the xerogels through calcination and its removal was confirmed through TGA analysis of the calcined gel. Microstructure of the gels was studied through SEM, XRD and FTIR. Nitrogen sorption studies were conducted to find out surface area of different samples. It was found out that the samples having PVA removed through calcinations have higher surface area (411.64 $m^2$/g) than the samples (353.544 $m^2$/g) synthesized without any PVA. Adsorption properties of these xerogels synthesized by using different ratios of components were studied by taking Rhodamine G6 as a model adsorbate. The experiments were conducted at room temperature ($25^{\circ}C$). UV visible spectroscopy was used to measure the concentration of the dye before and after adsorption. The adsorption data of Rhodamine G6 on PVA modified silica is described by the Freundlich's adsorption model.

• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.317-322
• /
• 1999

Transparent films were prepared using the sol-gel process by mixing TEOS with PVA solution that was solved in EtOH and distilled water homogeneously. HCl, $CH_3COOH$ and $NH_4OH$ were used as catalysts of the sol-gel process, and for improving the flexibility of films glycerol was used as plasticizer. In case of each catalyst, transparency and tensile strength were increased, and glass transition temperature (Tg) was shifted to higher temperature with increasing TEOS ratio. Also, in case of adding the plasticizer, the flexibility of films was increased. On the contrary, transparency, thermal stability and tensile strength were decreased with increasing HCl and $NH_4OH$ ratio. Also, the range of being made of film type was expanded when $CH_3COOH$ was used than HCl and $NH_4OH$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.657-659
• /
• 2008

Barrier coating properties of PVA/$SiO_2$ on the flexible substrates (PEN) have been investigated. Thin layer of PVA/$SiO_2$ organic-inorganic hybrid materials were deposited on PEN substrate by the spin-coating. The optical properties and surface roughness of barrier layer on flexible substrate were characterized by AFM, UV-Vis and WVTR/ OTR.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.530-536
• /
• 2023

The theoretical capacity of silicon-based anode materials is more than 10 times higher than the capacity of graphite, so silicon can be used as an alternative to graphite anode materials. However, silicon has a much higher contraction and expansion rate due to lithiation of the anode material during the charge and discharge processes, compared to graphite anode materials, resulting in the pulverization of silicon particles during repeated charge and discharge. To compensate for the above issues, there is a growing interest in SiO_x materials with a silica or carbon coating to minimize the expansion of the silicon. In this study, spherical silica (SiO₂) was synthesized using TEOS as a starting material for the fabrication of such SiO_x through heating in a reduction atmosphere. SiO_x powder was produced by adding PVA as a carbon source and inducing the reduction of silica by the carbothermal reduction method. The ratio of TEOS to distilled water, the stirring time, and the amount of PVA added were adjusted to induce size and morphology, resulting in uniform nanosized spherical silica particles. For the reduction of the spherical monodisperse silica particles, a nitrogen gas atmosphere mixed with 5 % hydrogen was applied, and oxygen atoms in the silica were selectively removed by the carbothermal reduction method. The produced SiO_x powder was characterized by FE-SEM to examine the morphology and size changes of the particles, and XPS and FT-IR were used to examine the x value (O/Si ratio) of the synthesized SiO_x.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.211-217
• /
• 2017

In this study, we investigated to the heat transfer performance of coating nano-structure with various shapes and patterns on the heat transfer surface. As a result of the measurement of the 3D nano shape, it was confirmed that the roughness generally increases when the adhesive is sprayed on the coating surface and finished durability experiment. In the case of TEOS adhesive, the roughness increased by $0.074{\mu}m$, $0.012{\mu}m$ and $0.015{\mu}m$, and the contact angle decreased $12.64^{\circ}$, $1.31^{\circ}$, $9.84^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of PVA adhesive, the roughness increased by $0.069{\mu}m$, $0.056{\mu}m$ and $0.03{\mu}m$, and the contact angle decreased $2.85^{\circ}$, $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of DGEBF adhesive, the roughness increased by $0.042{\mu}m$, $0.053{\mu}m$ and $0{\mu}m$, and the contact angle decreased $0.81^{\circ}$ at the coating time of 120 seconds, increased $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 180 seconds and 240 seconds, respectively. As a result, the durability tends to decrease as more nano-structures are deposited, and 3D nano shapes, contact angles and SEM photographs showed that the performance of the PVA adhesive was superior among the three adhesives.