• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.77-83
• /
• 2005

The verified thermal efficiency, thermal capacity confirmed the effects of the cooling system. Therefore, it is useful for preventing the PV cell temperature rising when solar radiation accumulates in summer. When adopting a hybrid panel for the BIPV system, the affected areas include the vertical outside walls facing the south, southeast, and southwest on the curtain walls excluding windows. The standards on replace aluminum panel which were the popular exterior material were investigated, Designing practice made sure that it could be manufactured in various sizes, and confirmed the most proper method to install a hybrid panel in the BIPV system.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.216-218
• /
• 2019

태양광발전시스템은 최대의 전력을 생산하기 위하여 PV 패널의 운전을 최대전력점에서 동작하게 하는 MPPT(Maximum Power Point Tracking) 제어가 필요하다. 그중 대표적인 방법인 P&O(Perturb and Observe) 알고리즘은 전류와 전압을 측정하여 계산된 전력의 값이 최대가 되는 전압의 운전점을 찾는다. 그러나 센서의 측정오차로 인하여 발전전력의 계산 및 전압의 제어에 불규칙한 오차가 발생하여 정확한 MPP 운전점을 찾지 못하는 문제가 발생한다. 본 논문에서는 전형적인 맑은 날씨와 흐린 날씨에서 취득한 일사량 데이터와 전류 및 전압 센서의 오차를 고려하여 P&O 알고리즘에 의한 전력 생산량을 시뮬레이션 한다. 시뮬레이션 분석을 통해 실제 날씨 및 센서허용오차 조건에서 MPPT 목표 효율을 극대화할 수 있는 최적의 MPPT 제어주기와 변량전압의 크기를 제시한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.210-212
• /
• 2019

태양광발전에서 PV panel의 출력 전압 및 전류는 제한적이기 때문에, 필요로 하는 전원 조건을 충족시키기 위하여 PV panel을 직병렬로 연결하여 PV array를 구성한다. 이때, PV array에 부분적인 그림자가 발생할 경우 최대발전전력은 PV array의 접속 구조와 블록킹 다이오드 유무에 따라 달라진다. 본 논문에서는 PV panel의 직병렬 접속에 따른 PV array의 6가지의 접속 구조와 블록킹 다이오드 유무를 고려하여, 부분적인 그림자가 발생할 경우 발전전력을 극대화할 수 있는 최적의 접속 구조를 제시하고 시뮬레이션과 실험을 통해 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1146-1147
• /
• 2008

PV Power Conditioning System (PCS) must have high conversion and low cost. Generally, PV PCS uses either a single converter or multilevel module integrated converter (MIC). Each of these approaches has both advantage and disadvantage. For a high conversion efficiency and low cost of PV module, this paper proposes series connection of module integrated DC-DC converter's output with PV panel. Output voltage of PV panel is connected to the output capacitor of flyback converter. Thus, converter's output voltage is added to the output voltage of PV panel. Isolated DC-DC converter generates only the difference voltage between the PV panel voltage and the required total output voltage. This method reduces power level of DC-DC converter and enhances the energy conversion efficiency compared with conventional DC-DC converter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.847-851
• /
• 2011

Photovoltaic System is increasing install capacity based on environmental-friendly characteristics. It have been actively studied to improve the efficiency. In order to design highly efficient system, it is important to understand the output characteristics of solar panels. The single diode model can represent the physical characteristics of solar panel. But it needs complex process such as mutli-step measurement and numerical analysis to get the exact parameters. In this paper, The method for extracting characteristic parameters of the single diode model based on the I-V characteristic curves in the panel manufacturer's data-sheet is presented. To verify the proposed method, solar cell model constructed in simulink. Simulink model output compared with output graph in datasheet.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.222-227
• /
• 2011

2-axis tracking solar PV system applying a fixed-type unit than in the same area as the panel's power output to more than 140% can be obtained that have been identified. However, this approach compared with fixed or 1-axis control system and control the complexity of trekking equipment power the cursor comes to a relatively small output PV unit is called. In this paper, a small PV power units as a way to improve the economics of the small output of multiple PV units in the central control unit in enclosed places an intermittent manner by a remote control for each unit of the trek at the same time to simplify the control mechanism to reduce power that will be introduced. also the construction of large-scale PV development plans in difficult environments can be utilized in a manner appropriate to introduce.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.183-184
• /
• 2016

태양광 패널 등가모델을 결합한 태양광 발전 패널 모의 장치(SAS)는 정확도 면에서 많은 장점이 있다. 특히 SAS에서 사용되는 등가회로 모델은 주변 환경에 맞게 빠르게 변하는 I-V 출력특성을 추출할 수 있어야 하며, 추출시간이 짧을수록 좋다. 본 논문은 태양광 등가회로 모델의 파라미터를 빠르게 추출하여 I-V 특성곡선을 모사할 수 있는 방법을 제안한다. 제안한 모델은 실시간으로 변화하는 태양광 패널의 출력 특성을 빠르게 모사하기 위해 미분을 사용해서 등가회로의 파라미터를 추출한다. 제안 모델의 타당성 검증은 기존의 사용하는 방법들과의 비교를 통해 진행하였고, 그 결과 정확도는 기존의 사용하는 방법과 비슷하게 유지하면서 속도는 향상됨을 확인할 수 있었다.

• Current Photovoltaic Research
• /
• v.10 no.1
• /
• pp.6-15
• /
• 2022

Climate change is among the most important issues facing mankind in modern society. However, global PV energy expansion has been driven mainly by OECD countries. We investigate the determinants of PV energy growth by panel data of selected OECD countries from 1991 to 2018. We investigate four categories of driving factors: socioeconomic, technological, country specific, and policy factors. The test results support that PV capacity growth is significantly driven by technology development and multidimensional environment policy factors. Socioeconomic factors such as CO₂, GDP, and electricity price are statistically significant on the growth of PV energy, too. Whereas, country-specific solar potential factor is the least related. As most of the socioeconomic factors are exogenous, we need to focus more on PV technology development and policy measures.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2022

With the advent of cutting-edge technology, renewable energy is significantly considered as alternative resources to supply electric power. However, many barriers such as energy intermittency, high initial installation cost, and low-efficiency generation challenged building new infrastructure with clean energy. Efforts reducing greenhouse gas emissions and reliance on fossil fuels resulted in the decentralization of power generation like distributed energy resource (DER). This paper is to introduce and evaluate the feasibility of building-integrated photovoltaics (BIPV) in a high-rise building in Ulsan. To optimize BIPV, a variety of methods to minimize efficiency decrease and maximize electric power generation after installing BIPV on the building's facade are suggested. The variables causing power losses are analyzed. By utilizing System Advisor Model (SAM), actual power generated from solar panels is measured by Thin-film PV, Mono-crystalline PV, and Poly-crystalline PV.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.85-92
• /
• 2005

One of the most effective methods for utilizing solar energy is to combine thermal solar and optical energy simultaneously using a hybrid panel. Many systems using various kinds of photovoltaic panels have already been constructed. But utilizing solar energy by means of a hybrid panel with concentrator has not been to be attempted yet. Normally if sunlight is directed on the solar cell, and there is no increase in temperature, the absorption energy of each cell will increase per unit area. In a silicon solar cell. however, cell conversion efficiency decreases according to the increasing temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. we design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect effectively thermal energy. We compared performance of new hybrid panel with PV module and thermal panel. We also evaluated conversion efficiency, electric power and thermal capacity and confirmed cooling effect from thermal absorption efficiency.