• Current Photovoltaic Research
• /
• v.5 no.3
• /
• pp.95-99
• /
• 2017

The interconnecting shingled solar cells method shows extremely high ratio active area per total area and has the excellent potential for high power PV (photovoltaic). Compared to the conventional module, it can have much more active area due to busbar-free structure. The properties of ECA (electrically conductive adhesives) are significant to fabricate the shingled array PV since it should be used in terms of electric and structural connection. Various ECA were tried and characterized to optimize the soldiering conditions. The open circuit voltage of shingled array cells showed a three-fold increase and efficiency was also increased by 1.63%. The shingled array cells used in CE3103WLV showed the highest power and in CA3556HF the lowest curing temperature and very fast curing time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1949-1954
• /
• 2016

Smart grid technology can be called grid techniques to improve the efficiency of the electric power by exchanging bidirectional information of electric power with real-time between electric power suppliers and consumers. Recently, the solar power generation system is being applied actively. However the solar power system has several problems leading to reduce overall electricity generation, because the difficult of the diagnosis and the solar power system failure such as PV(PhotoVoltaics) and inverter. In order to build an efficient smart grid, a stable electric power energy requirements capture and management and early fault detection is essentially required in solar power generation system. In this paper, it is designed to monitor the operating status of the solar power monitoring system from a remote location through a RS-485 or TCP/IP communication module to monitoring the output of solar power energy and abnormal phenomenon, to developing the measurement module and to transfer measured data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.69-72
• /
• 2009

In this paper, the Stand-alone underground water pumping system was developed that is consist of Submersible Pump (AC type), Photovoltaic Array and Power converter by the application of solar energy. And also wish to introduce system that is possible to supply of drinking water or water for agriculture using solar energy at desertification area or a Off-grid area, interior etc. and operation test results. This system can use in deep tube well of 200m range with common Submersible Pump and maximized to the quantity of pumping through M.P.P.T control. Also system availability raised through apply various driving mode.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.248-254
• /
• 2012

In the situation of expanding domestic solar power supply business long-term performance modeling of a proposed solar-cooling and cleaning system to increase electromotive force and light transmission is carried out to test the effectiveness of the system. To test the effectiveness of the system, the data which comparing the solar power planet installing the system to not installing at the same time is used. A difference between the utilization factor of each comparison group were recorded. Approximately from one year to two years Field Test was performed, Result of apply to cooling/cleaning technology, Each of plant by From least 7 percent up to 16 percent utilization factor increased, and the cooling / cleaning is output through improved as a result of the determined.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.929-932
• /
• 2003

Recently, energy Problem has become more important thing than that of past years. Therefore, researchers in many countries are trying to find the solution for removing energy Problem. One of all is the power generation with using the photovoltaic system. Because this system has some advantage, like purity and infinity. However, there are some problems to generate electrical power with using photovoltaic system. That problems, taking up a very big space and taking financial worries, come into existence. So it is inevitable to make the visual implement equipment for doing repetition experiment and solving this problems. In this paper, Boost converter are analyzed and simulated to make high power PV virtual implement system as input source instead of using transformer.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.247-250
• /
• 2002

This paper presents a utility interactive photovoltaic generation system with the angle of inclination and direction. This paper summarizes the results of these efforts by offering a snapshot of the configuration of photovoltaic in residential applications. The status of PV system components and inter -connection and safety equipment will be summarized. also, This System is able to variation the angle of inclination and direction. Hence this paper discuss only results that might be useful for generation power.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.248-249
• /
• 2012

PV 어레이에 부분적으로 음영이 발생하면 그 P-V 특성은 여러 개의 MPP를 보인다. 이런 상황에서는 global MPP를 찾아내기 위한 특수한 기법이 요구된다. 본 논문에서는 기존에 제안된, 부분 음영 조건 발생 시 global MPP를 찾아내는 MPPT 기법을 개선하고 실험을 통하여 유효성을 검증한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1187-1195
• /
• 2013

Photovoltaic inverters should always track the maximum power of solar cell arrays in operation. Also, they should be irrespective of the maximum power point voltage of a wide range of solar cells in tracking the maximum power point. If the current ripple of solar cells occurs, the function of maximum power point tracking drops, and normal tracking is difficult when solar radiation or the maximum power point changes. To solve this problem, this paper proposed a new maximum power point tracking algorithm with high efficiency and an algorithm to reduce the current ripple of solar cells. According to the results from the test on 4KW grid-connected PV inverter, the efficiency of maximum power point tracking and inverter output and the total harmonic distortion of inverter output current showed 99.97%, 97.5% and 1.05% respectively. So, the inverter showed excellent performance, and made possible stable maximum power point tracking operation when the solar radiation rapidly changed from 100% to 10% and from 10% to 100% for 0.5 seconds.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.219-221
• /
• 2009

태양전지 어레이(PV-array)로부터 발전되는 DC 전력을 AC로 변환시켜 계통으로 발전시키는 역할을 하는 태양광 발전 시스템용 PCS의 스위칭 회로 Topology로는 일반적으로 3상 풀브리지 회로가 사용된다. 이러한 3상 풀브리지 회로 시스템의 수명예측을 위해 DC link 단의 커패시터의 커패시턴스를 계산하여 커패시턴스의 감소정도를 이용하여 전체 시스템의 수명을 예측하게 된다. 이러한 커패시터의 상태를 추정하기 위해서는 시스템을 정지시킨 후 커패시터를 분리하여 커패시턴스를 측정하는 방법, 특정 주파수의 전류(일반적으로 저주파)를 주입하고 주입한 전류의 주파수에 해당하는 전류 및 전압을 검출하여 capacitance 연산하는 방식등이 이용된다. 시스템을 정지시킨 후 커패시터를 분리하여 커패시턴스를 측정하는 방법은 번거로우며, 전류 주입을 이용한 방식은 불필요한 고조파 전류가 계통으로 침투하는 단점을 가진다. 그러므로 본 연구에서는 모듈타입 PCS 이용시 계통으로 고조파 침투가 없는 비침투 커패시턴스 계산 알고리즘을 제안한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.54-63
• /
• 2007

This paper is proposed a novel method that computed approximately maximum power of photovoltaic system and solar tracking method. Proposed novel is linear reoriented coordinates method(LRCM), this paper is proposed new mathematical dynamic model using LRMC and DC dynamic equation. LRCM has the advantage that is decreased calculating time, decides optimal voltage and maximum power that generates continually. Furthermore solar tracking method is improved over 50[%] photovoltaic efficiency than fixed method. This paper is proposed MPPT using LRCM and solar tracking method using program method that is adequate domestic conditions, prove verify of proposed method through experiment.