• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1231-1234
• /
• 2000

최근, 인터넷, 무선 네트워크, 위성통신, 케이블 네트워크 등 서로 다른 네트워크 시스템들 간의 상호 연결 능력이 빠른 속도로 증가하고 있으며, 이는 데이터 배포에 기반을 둔 정보 중심 응용 분야를 새롭게 확산시키고 있다. 이러한 응용들은 데이터를 많은 수의 클라이언트로 전송하기 위하여 Push 기술을 사용하는데, Push 기술과 Broadcast와의 차이에 대해 최근에 많은 혼란과 논란이 일고 있다. 이러한 혼란은, Push 기술이 데이터 전달 메커니즘의 비중있는 디자인의 한 면이라는 점과, 네트워크 정보시스템이 정보 생산자와 소비자가 다른 집합사이에서 서로 다른 데이터 전달체계를 이용 할 수 있다는 점으로부터 발생된다. 본 논문에서는 배포 기반의 정보 시스템과 그 응용들을 위한 디자인 공간의 특징을 정의하고, 현재의 Push 기술의 구현 방법을 분석한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1236-1242
• /
• 2014

In this work, a D-band VCO(Voltage Controlled Oscillator) has been developed in a 65-nm CMOS technology. The circuit was designed based on push-push mechanism. The output oscillation frequency of the fabricated VCO varied from 152.7 GHz to 165.8 GHz, and the measured output power was from -17.3 dBm to -8.7 dBm. A phase noise of -90.9 dBc/Hz is achieved at 10 MHz offset. The chip size of the circuit is $470{\mu}m{\times}360{\mu}m$ including the probing pads.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.207-212
• /
• 2012

In this work, a 70/140 GHz dual-band push-push voltage controlled oscillator(VCO) has been developed based on a 0.18-${\mu}m$ SiGe BiCMOS technology. The lower band and the upper band oscillation frequency varied from 67.9 GHz to 76.9 GHz and from 134.3 GHz to 154.5 GHz, respectively, with tuning voltage swept from 0.2 to 2 V. The calibrated maximum output power for each band was -0.55 dBm and -15.45 dBm. The VCO draws DC current of 18 mA from 4 V supply.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2020

The purpose of this study was to investigate the effects of sling and vibrator application of knee push-up plus motion on trunk muscle activities. Ten healthy adult males(age, 23.00±0.45 years; height, 176.60±1.64 cm; body mass, 67.50±1.22 kg; and BMI, 21.65±0.34 kg/㎡) were participated in this study as subjects. Three types' knee push-up plus motions were performed(basic knee push-up plus motion, BKPP; knee push-up plus motion with sling, KPPS; knee push-up plus motion with vibration, KPPV). We measured the right side's trunk muscle activities of the upper trapezius(UT), pectoralis major(PM), serratus anterior(SA), rectus abdominis(RA), and external oblique(EO). The research findings were as follows. UT, PM, SA, RA, and EO muscle activities were greatest during KPPV(p<.001). These results are expected to serve as reference materials for knee push-up plus motion applications in training programs for trunk muscle strengthening.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.115-124
• /
• 2015

In this paper we analyse the previous (Quality of Services) and QoE(Quality of Experience) methods, and propose a high reliable network system framework and its service forwarding method that is able to provide seamless N-Screen services for proliferating disaster informations. The service satisfaction measurement, i.e., QoE, of contents consumers in N-screens services is going to be important the factor in disaster information proliferation because N-Screen services in the previous methods based on multi devices only focused on information transmission. The proposed system around these services is composed of a disaster information process framework for accepting user's service requirement, push service modules for minimizing the number of packets to be caused when carrying out the push service, and a push service controller for maximizing QoE measures. In order to provide a seamless N-Screen service on diverse screens, such as smartphone, PC, and big screen, we also have Open API(Application Programming Interface) functions. Through these results, we expect to evaluate QoS and QoE quality in the seamless N-Screen service.

• Earthquakes and Structures
• /
• v.26 no.6
• /
• pp.489-499
• /
• 2024

Infill masonry walls are vulnerable to lateral loads, including seismic, wind, and concentrated push loads. Various strengthening metal fittings have been proposed to improve lateral load resistance, particularly against seismic loads. This study introduces the use of post-compressed wedges as a novel reinforcement method for infill masonry walls to enhance lateral load resistance. The resistance of the infill masonry wall against lateral-concentrated push loads was assessed using an out-of-plane push-over test on specimens sized 2,300×2,410×190 mm³. The presence or absence of wedges and wedge spacing were set as variables. The push-over test results showed that both the unreinforced specimen and the specimen reinforced with 300 mm spaced wedges toppled, while the specimen reinforced with 100 mm spaced wedges remained upright. Peak loads were measured to be 0.74, 29.77, and 5.88 kN for unreinforced specimens and specimens reinforced with 100 mm and 300 mm spaced wedges, respectively. Notably, a tighter reinforcement spacing yielded a similar strength, as expected, which was attributed to the increased friction force between the masonry wall and steel frame. The W-series specimens exhibited a trend comparable to that of the displacement ductility ratio. Overall, the findings validate that post-compressed wedges improve the out-of-plane strength of infill masonry walls.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.323-327
• /
• 1998

컴퓨터와 통신망 기술의 발전으로 많은 언론 기관에서 전자신문 서비스를 제공하고 있다. 그러나 현재 서비스되는 전자신문은 텍스트 위주의 정적인 정보를 주고 서비스 하며, 사용자가 필요한 정보를 찾아 다니는 pull 기술을 기반으로 서비스한다. 그리고 사용자 맞춤 기능을 제공하기 못하므로, 불필요한 정보를 사용자에게 전송함으로써 시스템 자원을 낭비하는 단점을 가지고 있다. 본 논문에서는 멀티미디어 데이터를 지원하는 NOD(News On Demand)시스템에서 텍스트 데이터 뿐아니라 오디오/비디오 데이터를 push 하므로써 서버의 load를 분배시키고 사용자에게 실시간성을 제공하는 NOD 분배 서버를 설계하고 프로토타입을 구현하였다. 특히 본 논문에서는 대용량 데이터인 오디오/비디오 데이터를 사용자 시스템으로 Push할 때, 사용자 시스템의 디스크 공간상태 등을 고려하여 실시간성을 유지할 수 있는 적정 Push 량을 시뮬레이션을 통해 측정하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.397-404
• /
• 2010

Recently, there is on-going research about tactical data link system based on the legacy radio. Tactical data link based on legacy radio is operated mostly in narrow bandwidth under 25khz. Communicating traffics in nodes participated at network need to be minimized for distributing tactical data in narrow bandwidth. In addition, the data distributing structure is necessary for distributing tactical informations such as a situation awareness and so on to war fighters. However, conventional server-client system wastes a lot of time to obtain information for war fighters as user uses pull system to gather necessary information by seeking it one by one. Especially, the fighter pilot is supposed to dedicate into a situation awareness and fight mission in every seconds but seeking information of a user terminal while aircraft maneuvering affects as obstacle to concentrate engaging hostiles. therefore, push technology, the tactical data distributing system, is necessary for war fighters to receive fixed tactical data automatically without putting attention to it. This paper propose the UMPC tactical data link push framework. the UMPC tactical data link is a tactical data link system based on the legacy radio. Proposed push framework is verified by composing experiment environment and testing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.71-80
• /
• 2007

This paper presents a new push-push VCO technique that extracts a second harmonic output signal from a capacitive commonnode in a negativegm oscillator topology. The generation of the $2^{nd}$ harmonics is accounted for by the nonlinear current-voltage characteristic of the emitter-base junction diode causing; 1) significant voltage clipping and 2) different rising and falling time during the switching operation of core transistors. Comparative investigations show the technique is more power efficient in the high-frequency region that a conventional push-push technique using an emitter common node. Prototype 12GHz and 17GHz MMIC VCO were realized in GaInP/GaAs HBT technology. They have shown nominal output power of -4.3dBm and -5dBm, phase noise of -108 dBc/Hz and -110.4 dBc/Hz at 1MHz offset, respectively. The phase noise results are also equivalent to a VCO figure-of-merit of -175.8 dBc/Hz and -184.3 dBc/Hz, while dissipate 25.68mW(10.7mA/2.4V) and 13.14mW(4.38mA/3.0V), respectively.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.417-418
• /
• 2016

일반적인 상용차에서 사용되고 있는 기계식 에어컨 시스템은 엔진의 가동(주행 또는 공회전)에 의해 발생되는 에너지를 이용해 차량 실내온도를 유지시켜준다. 이러한 기계식 에어컨 시스템의 작동은 엔진 구동력의 일부를 사용하기 때문에 상용차의 연비와 큰 관련성 있다. 상용차량은 경우 하절기 작업대기, 차량 내 야간취침 등이 빈번해 운전자의 운행습관에 따라 연료 소비량이 증가하는 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 대형 상용차량이 정차중인 무시동 기간에도 일정 온도의 유지가 가능한 전동식 압축기 구동용 Cascaded Push-Pull 컨버터를 제안하였다.