• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.31-35
• /
• 2017

탱크선과 같은 대형 선박 내부에 설치된 펌프시스템은 펌프장의 수위와 유량 조건에 따라서 펌프 내부유동이 크게 영향을 받게 된다. 그러나, 펌프의 성능은 설계 시 일반적으로 펌프가 작동될 펌프장 환경을 고려하지 않고 펌프 자체의 성능만을 고려하여 설계하기 때문에 펌프로 유입되는 유동에 포함된 보텍스와 선회류의 영향을 받을 경우 펌프장 내에서 공기를 동반한 보텍스 및 선회류가 발생하며, 이러한 유동 환경의 영향으로 펌프의 효율저하, 진동 및 소음문제를 일으킬 수 있다. 본 연구에서는 이러한 펌프장의 운전 조건에 따른 내부유동을 검토하기 위하여 펌프장 축소모델을 설계 및 제작하여 수위에 따른 보텍스의 발생 빈도 및 형상을 기초실험을 통하여 확인하였으며, 공기를 동반하여 펌프에 흡입되는 보텍스 Class c의 경우 상대적으로 낮은 수위에서 높은 빈도로 발생하는 것을 확인하였다.

• Journal of Chest Surgery
• /
• 제42권6호
• /
• pp.704-709
• /
• 2009

배경: 본 연구는 심폐바이패스를 사용하지 않는 관상동맥우회술 중 발생한 혈역학적 불안정에 대한 대동맥내 풍선펌프 치료의 유용성을 평가하고자 하였다. 대상 및 방법: 2000년 1월부터 2006년 12월까지 심폐바이패스를 사용하지 않는 관상동맥우회술을 받은 796명의 환자를 대상으로 하였다. 수술중 대동맥내 풍선펌프 삽입이 필요했던 환자들을 I군(n=39), 삽입하지 않았던 환자들을 II군(n=757)으로 분류하였다. 결과: 두 군간에 수술 사망률(2.6%, 1/39 vs. 0.8%, 6/757; p=0.195)과 심방 세동(p=0.691), 뇌졸중(p=0.908), 종격동염(p=0.781) 이환율의 차이는 없었다. 인공호흡기 치료 시간, 중환자실 및 병원 재원 기간은 I군에서 II군보다 길었다 (p<0.05). 다변량 분석에서 수술 중 대동맥내 풍선 펌프 삽입이 수술 사망률을 유의하게 증가시키진 않았다(p=0.549). I군에서 대동맥내 풍선 펌프 치료와 관련하여 수술적 치료가 필요했던 합병증이 3예 있었으나(7.9%), 대동맥내 풍선 펌프 삽입 술기를 변형한 2003년 이후에는 발생하지 않았다. 결론: 심폐바이패스를 사용하지 않는 관상동맥우회술 중 혈역학적 불안정이 발생한 경우 대동맥내 풍선펌프를 이용하여 비교적 적은 합병증으로 관상동맥우회술을 시행할 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• 제1권3호
• /
• pp.368-375
• /
• 2003

Data fusion approach is investigated to avoid suction in the left ventricular assist system (LVAS) using a nonpulsatile pump. LVAS requires careful control of pump speed to support the heart while preventing suction in the left ventricle and providing proper cardiac output at adequate perfusion pressure to the body. Since the implanted sensors are usually unreliable for long-term use, a sensorless approach is adopted to detect suction. The pump model is developed to provide the load coefficient as a necessary signal to the data fusion system without the implanted sensors. The load coefficient of the pump mimics the pulsatility property of the actual pump flow and provides more comparable information than the pump flow after suction occurs. Four signals are generated from the load coefficient as inputs to the data fusion system for suction detection and a neural fuzzy method is implemented to construct the data fusion system. The data fusion approach has a good ability to classify suction status and it can also be used to design a controller for LVAS.

• 한국태양에너지학회 논문집
• /
• 제26권2호
• /
• pp.95-101
• /
• 2006

The purpose of this study is to present the simulation results and an overview of the performance assessment of the Ground-Source Heat Pump(GSHF) system. The calculation was performed for two design factors: the spacing between boreholes and the depth of the vertical ground heat exchangers. And the simulation was carried out using the thermal simulation code TRNSYS with new model of water to water heat pump developed by this study. As a result, it was anticipated that the yearly mean COPs of heat pump for heating and cooling are about 3.7 and 5.8 respectively and the heat pump can supply 100% of heating and cooling load all the year around.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2621-2625
• /
• 2007

This study aims at analyzing the flow characteristics of the electromagnetic pump using a linear induction motor (LIM) for transferring molten metals. The flow characteristics of the pump are simulated by magnetohydrodynamic(MHD) program. In this system, the LIM is used for transferring molten metal by electromagnetic force. The molten metal is treated as the secondary part of the LIM. Since the LIM produces an electromagnetic force in the duct, the molten metal can flow from the furnace to the reservoir. The flow characteristics of the pump are analyzed using MHD program for magnetic field of 0.1[T] in duct. In order to prove the analysis, we made a prototype electromagnetic pump using LIM.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1964-1968
• /
• 2007

The river water heat source heat pump has the advantage in the performance compared to air source heat pump. Although its better performance, the large temperature difference between load and source makes system performance worse by nature. In this study, 2-stage compression is considered as the solution of this problem. Generally, heat pump is designed for maximum capacity rate, but it actually operates at part load condition in many cases. Therefore, an information on the part-load character is very important in view of the system overall performance. In this study, part-load performance tests of a R134a 2-stage compression heat pump were carried out over the river water and supply heating water temperature changes. The experimental results show that the system performance is influenced by the part load rates, river water temperature, load temperature, etc.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.83-88
• /
• 2014

Pumps are widely used in industrial plants, energy systems, ships etc. Generally they consume nearly 20% each nation's total electrical energy. The objective of this study is to find performance evaluating method for variable-speed drive pump. In order to evaluate the variable-speed pump performance energy saving rate for the variable-speed pump is applied and compared with that of constant-speed pump.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.198.2-198.2
• /
• 2010

In this study, the COP variation with the duration of Ground Source Heat Pump (GSHP) systems operation was analyzed by experiment. This experimental facility was installed in residential house as a back-up device of solar thermal heating system. The capacity of heat pump is 2.5 kW with a vertical bore hole of 150m depth. The COP of GSHP is varied, depending on the ground temperature which is used as a heat source. The ground heat source temperature influencing heating COP is the soil or rock temperature which adjoin with geo-source heat exchanger. This temperature is decreased rapidly according to the operation duration of heat pump. As a result, COP of GSHP is decreased to 3 in one hour of continuous operation time.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.260-265
• /
• 2001

This paper describes total flow control of an ice slurry system for pump energy saving. Similar turbo machinery has a characteristic that input power ratio is proportional to the three time of revolution speed ratio. To reduce the energy cost of brine pump in ice slurry storage systems, inverter is adapted instead of 3-way valve to control the speed of brine pump motor. One type of cooling load profile was used as driving load of the system, generated by a boiler and warm water storage tank. As results of the laboratory test, energy consumption and cost of the pump were reduced by 11.4%.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1062-1070
• /
• 1995

The study deals with controlling the velocity of hydraulic motor with PI controller through the control of displacement pump which has higher efficiency than valve-controlled system. This was done as follows. First, we modified original displacement pump and designed this electrohydraulic puma system. Second, after experimenting static and dynamic characteristics, we identified system parameter of approximated model. Lastly, to control the velocity of hydraulic motor we controlled the angle of the swash plate of displacement pump. Test carried out in the laboratory shows that transient and steady state response could be improved by PI controller reducing power loss.