• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.373-373
• /
• 2006

Rigid polyurethane foams(PUFs) are widely used in most areas of insulations such as storage tank and pipe line for transporting liquefied gas. Glass fiber and nanoclay are used for improvement in mechanical property and thermal insulation of rigid PUF at very low temperature(<$-150^{\circ}C$). These rigid PUFs have been characterized in terms of thermal, mechanical, dynamic mechanical properties and cell morphology. It was found that mechanical properties, thermal conductivity and dimensional stability of rigid PU foams were improved by glass fiber and nanoclay.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.211-224
• /
• 2022

Multi-objective optimization was conducted to obtain the optimal configuration of a composite sandwich structure with honeycomb-foam hybrid core subjected to underwater shock waves, which can fulfill the demand for light weight and energy efficient design of structures against underwater blast. Effects of structural parameters on the dynamic response of the sandwich structures subjected to underwater shock waves were analyzed numerically, from which the correlations of different parameters to the dynamic response were determined. Multi-objective optimization of the structure subjected to underwater shock waves of which the initial pressure is 30 MPa was conducted based on surrogate modelling method and genetic algorithm. Moreover, optimization results of the sandwich structure subjected to underwater shock waves with different initial pressures were compared. The research can guide the optimal design of composite sandwich structures subjected to underwater shock waves.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.349-356
• /
• 2020

ISO 9705 룸코너 시험을 통해 복합소재 고체 가연물의 화재발생시 발생되는 열방출률을 측정하고 화재성장율을 계산하여 Fire Dynamics Simulator (FDS)에서 제공하는 열방출률 예측 모델을 사용자가 시험을 통해 얻어진 질량 소모율을 직접 입력하고 점화원에 의해 가연물의 표면 온도가 점화 온도에 도달하게 되면 정해진 연료를 소모하게 됨으로써 열방출률이 계산되는 단순 모델 (Simple model)과 질량 소모율을 직접 계산하는 방식으로 고체 가연물의 온도를 계산하고 고체 가연물의 열분해율을 조절하여 직접 열방출률을 계산하는 열분해 모델 (Pyrolysis model)로 구분하고 각각의 열방출률 모델에 필요한 입력 인자를 적용하여 동일한 조건에서 밀폐된 구획 환경에 따라 FDS 전산 해석을 수행하였다. 복합소재 고체 가연물로는 PU 폼과 PP, 철재로 대부분 구성되어있는 영화관 의자를 선정하였다. 동일한 조건에서 밀폐된 구획 환경에 따라 각각의 열방출률 예측 모델을 해석한 결과, 밀폐된 구획에서 단순 모델을 통해 예측된 열방출률과 화재성장율이 열분해 모델을 이용하는 경우에 비해 다소 과예측되는 것을 확인 할 수 있었다.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.22-28
• /
• 2020

복합소재 고체 가연물의 화재발생시 발생되는 열방출률을 ISO 9705 룸코너 시험을 통해 측정하였고 Fire dynamics simulator (FDS)에서 제공하는 열방출률 예측모델을 이용하여 전산해석을 수행하였다. 복합소재 고체 가연물로는 PU폼과 PP, 철재로 대부분 구성되어있는 영화관 의자를 선정하였다. FDS에서 제공되는 열방출률 예측방법을 단순모델과 열분해 모델로 구분하고 각각의 모델을 적용하여 동일한 조건에서 전산 해석한 결과, 열분해 모델을 통해 예측된 열방출률과 화재성장율이 단순모델을 이용하는 경우에 비해 ISO 9705 룸 코너 시험을 통해 측정된 결과와 잘 일치함을 확인할 수 있었다.

• International Journal of Safety
• /
• 제4권1호
• /
• pp.14-17
• /
• 2005

Recycled polyol was obtained by glycolysis of MDI-based Polyurethane(PU) rigid foam. The chemical structure of the recycled pclyol was confirmed by GC(gas chromatography) and 1H-NMR. The recycled polyol throughout the glycolysis contained liquid polyol and methylenedianiline(MDA). MDA which could cause liver cancer is carcinogenic material. TWA(Time Weighted Average.) amount for MDA in MSDS(Material Safety Data Sheets) was confined less than 0.1 ppm. The melting temperature of MDA is $92^{\circ}C$, and boiling temperature is $398^{\circ}C$. During the gylcolysis most of MDA was dissolved in liquid polyol. The probability that MDA diffuses into the atmosphere is low but there could be an absorption of MDA into skin. Furthermore because MDA is amine compound, recycled polyol which contained MDA had a difficulty in reaction control of polyurethane. Therefore reduction of MDA amount was needed strongly. In this study the elimination of MDA were performed through deamination of the recycled polyol by glycidyl ether compounds. As glycolysis was proceeded, the amount of MDA was 9.8 wt % at early stage and increased up to 14.0 wt % after 8 hours reaction. It was found that 2-Ethylhexyl glycidyl ether which contains aliphatic moiety was very effective compound for eliminating the primary aromatic amine compound :md the optimal mole ratio of 2-ethylhexyl glycidyl ether to MAD was 3. The final polyol after deamination by 2-ethylhexyl glycidyl ether has an appropriate viscosity(less than 500 centi poise) for polyurethane reaction.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권4호
• /
• pp.211-226
• /
• 2015

Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.

• 대한의용생체공학회:의공학회지
• /
• 제39권3호
• /
• pp.134-139
• /
• 2018

One of the most common problems with pedicle screw system is pullout of the screw. This study was performed to evaluate the pullout strength and driving torque of newly designed pedicle screws. The design of three type screws were standard pedicle screw, which had single lead threaded and single pitched design (Type A), single pitched and dual lead threaded pedicle screw (Type B), dual pitched and dual lead threaded pedicle screw (Type C), respectively. The tests were performed in accordance with the ASTM standards using polyurethane (PU) foam blocks. There was no significant difference in pullout strength among three types of screw. Type B and Type C exhibited higher insertion torque and removal torque than Type A, respectively (p<0.05). Pedicle screws newly developed with dual pitched and dual lead threaded design showed higher driving torque without decrease in pullout strength compared to the standard pedicle screw and could be inserted more rapidly with the same number of revolutions.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.79-84
• /
• 2006

Acoustic characteristics of a sound absorbing material can be identified, if the characteristic impedance and propagation constants are known, which have generally been determined experimentally. One easy method determining these two essential parameters is to measure the one dimensional wave characteristics in the impedance tube. In th udy, the effects of backing conditions on the impedance tube measurement have been examined using several pairs of generally used end conditions. The results showed that the measured values are similar for most pairs of end conditions: however, it was observed that the measured characteristic impedance for different thickness did not agree well for some pairs. In this work, the multi termination method, using three or more known backing con ns, was suggested to reduce such random errors, which are mostly caused by the test procedure. Employing three terminations as a set, comprised of a rigid end, an end with porous material, and an end with a backing cavity, it was demonstrated that improved measured results could be obtained for an open cell PU foam varying widely with three different thicknesses.

• 마이크로전자및패키징학회지
• /
• 제26권1호
• /
• pp.9-15
• /
• 2019

본 연구에서는 3차원 기공구조를 지닌 금속 및 고분자 소재를 이용한 수직 마찰모드의 정전기반 나노발전기(triboelectric nanogenerator, TENG) 제조기술을 소개하고 이에 관한 응용 연구를 수행하였다. 다양한 장점을 지닌 3차원 기공구조를 활용하여 설계된 간단하며 효율적인 나노발전기로, 반복적인 접촉/분리를 통해, 120 V에 이르는 순간 전압특성과 최대 출력 $0.74mW/m^2$을 획득하였다. 실제적인 응용 연구로 48개의 발광소자 구동 실험을 실시하였으며, 저전력 소비 전자소자 장치로의 응용 확장성을 확인하기 위해 회로 구성을 통한 커패시터 축적기능을 확인하였다. 본 연구에서 소개하는 정전기반 에너지 하베스팅 기술은 매우 경제적으로 제조할 수 있는 실용적인 접근방식으로, 반복적으로 가해지는 마찰에 의한 정전력을 효율적으로 획득하여 가까운 미래에 자가발전(self-powered)형 소형 전기소자 구동, 휴대형 전자기기 및 대규모의 전자 발전 장치에 적용 가능할 것으로 기대된다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.435-441
• /
• 2012

A new manufacturing process of Fe-Cr-Al powder porous metal was attempted. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on PU (Polyurethane) foam through the electrospray process. And then degreasing and sintering processes were conduced. In order to examine the effect of sintering temperature in process, pre-samples were sintered for two hours at temperatures of $1350^{\circ}C$, $1400^{\circ}C$, $1450^{\circ}C$, and $1500^{\circ}C$, respectively, in $H_2$ atmospheres. A 24-hour TGA (thermo gravimetric analysis) test was conducted at $1000^{\circ}C$ in a 79% $N_2$+21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing sintering temperature (2.57% oxidation weight gain at $1500^{\circ}C$ sintered specimen). The high temperature oxidation mechanism of newly manufactured Fe-Cr-Al powder porous metal was also discussed.