• Ocean Systems Engineering
• /
• 제9권1호
• /
• pp.1-19
• /
• 2019

Latching control was applied to a Wave Energy Converter (WEC) buoy with direct linear electric Power Take-Off (PTO) systems oscillating in heave direction in waves. The equation of the motion of the WEC buoy in the time-domain is characterized by the wave exciting, hydrostatic, radiation forces and by several damping forces (PTO, brake, and viscous). By applying numerical schemes, such as the semi-analytical and Newmark ${\beta}$ methods, the time series of the heave motion and velocity, and the corresponding extracted power may be obtained. The numerical prediction with the latching control is in accordance with the experimental results from the systematic 1:10-model test in a wave tank at Seoul National University. It was found that the extraction of wave energy may be improved by applying latching control to the WEC, which particularly affects waves longer than the resonant period.

• 농업과학연구
• /
• 제48권4호
• /
• pp.1039-1050
• /
• 2021

The purpose of this study is to measure load data for a 55 kW class agricultural tractor during a harvesting operation and to analyze the required power according to the working conditions. A field test was conducted at three different tractor speeds (1.2, 1.3, and 1.4 km·h^-1). A load measurement system was developed for the front axles, rear axles, and for power take-off (PTO). The torque and rotational speeds of the axles and PTO were measured during the field test and were calculated as the required power. The results showed that the total required power was in the range of 4.86 - 5.48 kW during the harvesting operation according to the tractor speed, and it was confirmed that this represents a ratio of 8.8 - 10.0% of the engine rated power. Also, it was confirmed that the required power of the axle and PTO increased as the tractor speed increased. In future studies, we plan to supplement the measurement system for a tractor to include a hydraulic system and perform a field test for harvesting various underground crops.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.25-34
• /
• 2017

The concentric dual-buoy Wave Energy Converter (WEC), which consists of external buoy (hallow-cylinder) with toroidal appendage and cylindrical internal buoy within the moon-pool is suggested in this research and its performance in various wave conditions is studied. The Linear Electric Generator (LEG), consisting of a permanent magnet and coils, is used as a direct Power Take-Off (PTO) system. To maximize the electrical energy extracted from the PTO system, the relative heave motions between the dual buoys must be highly amplified by the multiple resonance phenomena of dual-buoy and internal-fluid motions. The high-performance range can be widened by distributing those natural frequencies with respect to the peak frequency of the wave spectrum. The performance of the newly developed dual-buoy WEC was measured throughout the systematic 1:5.95-model test in regular and irregular waves conducted in a wave tank at Seoul National University. The model-test results are also validated by an independently developed numerical method.

• Journal of Biosystems Engineering
• /
• 제36권2호
• /
• pp.79-88
• /
• 2011

The purpose of this study was to analyze power requirement of an agricultural tractor by major field operations. First a survey was conducted to obtain annual usage ratio of agricultural tractor by field operation. Plowing, rotary tillage, and loader operations were selected as major field operations of agricultural tractor. Second, a power measurement system was constructed with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. Third, the major field operations were experimented under fields with different soil conditions following planned operation paths. Power requirement was analyzed during the total operation period consisted of actual operation period (plowing, rotary tillage, and loader operations) and period before and after the actual operation (3-point hitch operating, forward and reverse driving, braking, and steering). Power requirement of tractor major components such as driving axle part, PTO part, main hydraulic part, and auxiliary hydraulic part were measured and calculated to determine usage ratio of agricultural tractor power. Results of averaged power requirement for actual field operation and total operation were 23.1 and 17.5 kW, 24.6 and 19.1 kW, and 14.9 and 8.9 kW, respectively, for plowing, rotary tillage, and loader operations. The results showed that rotary tillage required the greatest power among the operations. Averaged power requirement of driving axles, PTO axle, main hydraulic part, and auxiliary part during the actual field operation were 8.1, 7.8, 3.4, and 1.5 kW, respectively, and the total requirement power was about 70 % (20.8 kW) of the rated power. Averaged power requirement of driving axles, PTO axle, main hydraulic, and auxiliary hydraulic for the total operation period were 6.5, 6.0, 2.1, 0.9 kW, respectively, and total requirement power was about 52 % (15.5 kW) of the rated power. Driving axles required the greatest amount of power among the components.

• 한국해안·해양공학회논문집
• /
• 제30권6호
• /
• pp.253-262
• /
• 2018

진동수주형(OWC) 파력발전구조물(WEC)은 진동수주실 내의 수위진동에 의해 발생된 공기흐름을 Power-Take-Off (PTO) 시스템을 통해 전기에너지로 회수하는 시스템이다. 일반적으로 PTO 시스템에서 높은 공기유속을 획득하기 위해서는 해수에 비해 상대적으로 적은 단면적을 갖는 공기실이 요구되므로 정확한 공기유속을 모의하기 위해서는 3차원적인 해석이 요구된다. 본 연구에서는 불규칙파동장을 대상으로 해수소통구를 구비한 진동수주형 파력발전구조물의 동적응답을 수치해석적으로 검토하였다. 수치해석에는 오픈소스 기반의 OpenFOAM 및 FOAM 확장 커뮤니티를 위한 파동장 해석을 위해 개발된 OLAFLOW를 적용하였다. 선행연구와 동일한 형상의 해수소통구와 OWC-WEC에 불규칙파랑이 입사한 경우 공기실 내에서 3차원공기흐름과 구조물 주변에서 파랑변형 및 해수소통구 내에서 3차원해수흐름 등에 관한 변동특성을 논의하였다. 이로부터 유의파에 대한 Ursell 수가 클수록 공기실 내 최대 공기흐름속도가 증가하며, 공기실 내부에서 외부로 유출되는 공기속도가 외부에서 공기실 내부로 유입되는 공기속도보다 더 크다는 사실을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.305-313
• /
• 2015

Purpose: This study was performed to predict the fatigue life of a crank-type rotavator operated in domestic soil conditions using Recurdyn$^{(R)}$, a dynamic analysis program. Methods: Torque on the PTO shaft was measured using experiments conducted on the uplands and paddy fields in Korea. On the basis of the experimental and analytical results, the fatigue life of the crank-type rotavator was predicted by constructing an S-N curve according to the GL (Germanischer Lloyd Wind Energie GmbH) guideline. Results: The torques experienced by the PTO shaft in the paddy soil and the uplands were in the range of 472~797 N m and 313~430 N m, respectively, for every condition. In case of load condition, the peak torques (846 N m, 770 N m) were applied for severe conditions, resulting in a maximum (von Mises) stress of 75 MPa at the crank arm. The fatigue life of the crank-type rotavator was predicted to be 1,167 h that satisfies the target value of 1,110 h, by substituting the analysis results into an S-N curve of crank arm. Conclusions: The fatigue life of the crank-type rotavator was within the target life for the studied soil conditions; however, further field experiments for various soil conditions would be required to verify the prediction results.

• Ocean Systems Engineering
• /
• 제4권1호
• /
• pp.63-82
• /
• 2014

Declutching control is applied to a hemispherical wave energy converter with direct linear electric Power-Take-Off systems oscillating in heave direction in both regular and irregular waves. The direct linear Power-Take-Off system can be simplified as a mechanical spring and damper system. Time domain model is applied to dynamics of the hemispherical wave energy converter in both regular and irregular waves. And state space model is used to replace the convolution term in time domain equation of the heave oscillation of the converter due to its inconvenience in analyzing the controlled motion of the converters. The declutching control strategy is conducted by optimal command theory based on Pontryagin's maximum principle to gain the controlled optimum sequence of Power-Take-Off forces. The results show that the wave energy converter with declutching control captures more energy than that without control and the former's amplitude and velocity is relatively larger. However, the amplification ratio of the absorbed power by declutching control is only slightly larger than 1. This may indicate that declutching control method may be inapplicable for oscillating wave energy converters with direct linear Power-Take-Off systems in real random sea state, considering the error of prediction of the wave excitation force.

• 농업과학연구
• /
• 제40권1호
• /
• pp.53-59
• /
• 2013

Analysis of load data during field operations is highly important for optimum design of power drive lines for agricultural tractor. Objective of the paper was to analyze field load data using FFT to determine frequency and the energy levels of meaningful cyclic patterns. Rotary tillage, plowing, baling, and wrapping operations were selected as major field operations of agricultural tractor. An agricultural tractor with power measurement system was used. The tractor was equipped with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. In rotary tillage, calculated frequency was decreased as travel speed increased. In baler operation, calculated frequency was increased as PTO speed was increased. The calculated peak frequency levels and expected levels were similar. Results of the study would provide information on power utilization patterns and on better design of power drive lines.

• Journal of Microbiology and Biotechnology
• /
• 제29권12호
• /
• pp.1975-1981
• /
• 2019

Recently, outbreaks of food-borne diseases linked to fresh produce have been an emerging public health concern worldwide. Previous research has shown that when human pathogens co-exist with plant pathogens, they have improved growth and survival rates. In this study, we have assessed whether Escherichia coli O157:H7 benefits from the existence of a phytopathogenic bacterium and the underlying mechanisms were further investigated. When Pseudomonas syringae pv. tomato DC3000 (Pst DC3000) and E. coli O157:H7 were co-inoculated by either dipping or infiltration methods, the populations of E. coli O157:H7 increased; however, no effect was observed when type three secretion system (T3SS) mutants were used instead, suggesting that E. coli O157:H7 benefits from the presence of Pst DC3000. In addition, this study confirmed that the E. coli O157:H7 populations increased when they occupied the tomato leaf intercellular space; this colonization of the interior of the leaves was possible due to the suppression of the PAMP-triggered immunity (PTI) by Pst DC3000, in particular with the AvrPto effector. In conclusion, our data support a plausible model that E. coli O157:H7 benefits from the presence of Pst DC3000 via AvrPto suppression of the PTI resistance.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.994-1002
• /
• 2019

본 논문은 농업용 전기차량의 전기식 동력인출장치용 전력변환시스템에 대해 제안한다. 대부분의 전기식 동력인출장치(Electric Power Take-Off : e-PTO)는 상용전원 $220V_{AC}$를 사용한다. 농업용 전기차량의 낮은 배터리 전압을 사용하여 높은 출력 전압을 공급하기 위한 DC-DC 컨버터와 DC-AC 인버터로 구성된 2단 구조를 갖는 양방향 전력변환시스템이 적합하다. 제안하는 전력변환시스템은 1단의 Dual Active Bridge(DAB)컨버터와 2단의 양방향 풀 브릿지 인버터로 구성된다. 또한, 초기 구동시 DC 버스단 커패시터 충전에 의해 발생되는 돌입 전류 저감을 위해 소프트 스타트 알고리즘을 제안한다. 3kW급 전력변환시스템 시제품 및 알고리즘을 구현하고 실험을 통해서 실용성을 입증하였다.