• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.105-116
• /
• 1990

Seungbong Island is situated about 100km away Inchon Port in the western sea of the Korean Peninsula. Field investigations were conducted for two days each from June 30 through July 1, 1981 and from August 20 through 21, 1981. The results obtained are summarized as follows: Plants growing in this island consist of a total of 193 species (70 families, 151 genera, 170 species, 22 varieties and 1 forma). Pinus thunbergii was confirmed to be the dominant species. The natural degree observed in this island was high, as a whole. The coefficient of ferny plants (Pte-Q) is 0.95, lower than grass. Atractylodes japonica Koidz., Miscanthus sinensis Anders. var. purpurascense Rendle, and Rhododendron mucronulatum Turz. are distributed mainly on the forest bed of Pinus thunbergii. The poor distribution of Chenopodium album var. centrorubrum Makino, Setaria viridis (L.) Beauv., Amaranthus mangostanus Linne is considered attributable to the phenomenon of allellopathy caused by a chemical substance secreted from the leaves of Pinus thunbergii. The component ratio of species in this island is lower than that of other islands due probably to the small area of arable land and grassland. The poor growth of plants in the forest of Pinus thunbergii, the dominant species in this island, seems to be attributed to the low relative light intensity of the forest. Seaside plants consisting of a total of 7 species were distributed mainly in the vicinity of sandy beaches. Naturalized plants comprising a total of 11 species were relatively diversified in the number of species.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9879-9884
• /
• 2014

Aim: The purpose of the current study was to conduct a systematic review of the published literature to evaluate the diagnostic accuracy of FDG-PET, PTE/CT, MRI and scintigraphy for multiple myeloma related bone disease. Methods: Through a search of PubMed, EMBASE, and the Cochrane Library, two reviewers independently assessed the methodological quality of each study. We estimated pooled sensitivity, specificity, positive and negative likelihood ratios (PLR and NLR), and two sample Z-tests were conducted to evaluate for differences in sensitivity, specificity, area under the curve (AUC), and the $Q^*$ index between any two diagnostic modalities. Results: A total of 17 studies were reviewed. The MRI had a pooled sensitivity of 0.88, specificity of 0.68, AUC of 0.897, and $Q^*$ index of 0.828, whereas for MIBI, the corresponding values were 0.98, 0.90, 0.991, and 0.962, respectively, and for bone scan, they were 066, 0.83, 0.805, and 0.740, respectively. The corresponding values of MIBI were 0.98, 0.90, 0.991, and 0.962, respectively. For PET and PET/CT, the values were 0.91, 0.69, 0.927 and 0.861, respectively. Statistically significant differences were not found in the sensitivity, specificity, AUC, and $Q^*$ index between MRI, scintigraphy, FDG-PET and PET/CT. Conclusions: On the condition that X ray is taken as a reference in our study, we suggested that FDG-PET, PTE/CT, MRI and scintigraphy are all associated with high detection rate of bone disease in patients with MM. Thus, in clinical practice, it is recommended that we could choose these tests according to the condition of the patient.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.81-116
• /
• 2001

The flora of vascular plants investigated in civilian control line area was 730 taxa consisting of 104 families, 331 genera, 631 species, 2 subspecies, 90 varieties, 7 formae. The forest was comparatively well conserved by Pteridophyta calculation(Pte-Q), 1.27. Among the investigated vascular plants, Korean endemic plants(Carex okamotoi, Salix koriyanagi, Clematis chisanensis, Aconitum pseudo-laeve var. erectum, Viola diamantiaca etc.) were 31 taxa; rare and endangered plants(Disporum ovale, Lilium distichum, Trillium kamschaticum, Gastrodia elata etc.) were 35 taxa; naturalized plants(Dactylis glomerata, Poa pratensis, Rumex acetosella, Gypsophila oldamiana, Lepidium apetalum etc.) were 26 taxa. The forest vegetation was classified into 1 order, 1 alliances, 6 communities; Rhododendro-Quercetalia mongolicae Kim 1990(신갈나무-철쭉군목), Lindero-Quercion mongolicae Kim 1990(신갈나무-생강나무군단), A. Carex humilis v. nana- Phinus densiflora Community 소나무-산거울군락, B. Acer pseudo-sieboldianum-Quercus mongolica Community 당단풍-신갈나무군락, C. Styrax obassia-Quercus mongolica Community 쪽동백-신갈나무군락, D. Acer palmatum-Quercus mongolica Community 단풍나무-신갈나무군락, E. Rheodendron mucronulatum-Quercus mongolica Community 진달래-신갈나무군락, F. Betula schmiditii-Quercus mongolica Community 박달나무-신갈나무군락

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.44-55
• /
• 1996

This study was first performed since 1933 to investigate the flora of $\check{O}$ch$\check{o}$ng Island located in the middle part of Yellow Sea. A number of vascular plants recognized through in this survey were 319 taxa belonging to 78 families, 213 genera, 279 species, 38 varieties and 2 forma in which 38 species were newly recorded and 26 species of evergreen plant were identified. The Pteridophyta distributed in this island were 10 species and the naturalized plants were 4 species. And the coefficient of cryptogram(Pte-Q) and Urbanization Index(UI) as to the destruction degree of natural vegetation showed a value of 0.81, 3.64 respectively. Some noticeable species were Kadsura japonica, Castanopsis cuspidate var. thunbergii, Dendropanax morbifera, and Ficus stipulate and $\check{O}$ch$\check{o}$ng Island was considered as the northern limit of distribution of these species.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• The Korean Journal of Health Service Management
• /
• v.9 no.1
• /
• pp.17-29
• /
• 2015

This study, an examination of the plan for effective resource management for national university hospitals, was performed to determine the relationship between the effectiveness of patient output by considering input personnel using the DEA model and Management Performance, in which 4 years of data from 12 national university hospitals were analyzed. Among the components of the effectiveness, utilizing properly imput components from the application of VRS(Variable Returns to Scale), the Management Performance of national university hospitals was found to be affirmatively influenced by PTE(Pure Technical Efficiency). Regarding the Management Performance of national university hospitals in their attempts to establish a plan for effective human resource management, the management of patient numbers on the basis of calculation level with input is more recommendable than the controlling of personnel input using patient numbers. Thus, the establishment of a strategy plan for the proper allocation of administrative staff and sickbeds, considering the variation of patient numbers, is suggested.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.219-224
• /
• 2016

In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.317-321
• /
• 2009

Sensitivity to the new carboxylic acid amide fungicide, mandipropamid, of Phytophthora capsici causing pepper Phytophthora blight was determined on 187 isolates collected in Korea over 3 years, from 2005 to 2007. All isolates were sensitive to mandipropamid, with $EC_{30}$ values for growth of mycelia ranging from 0.001 to $0.037\;{\mu}g/ml$. Among the isolates, 147 (79.0%) isolates were sensitive to metalaxyl, whereas others were resistant to this fungicide. Mandipropamid had the same effect on mycelium growth of both metalaxyl-sensitive and metalaxyl-resistant isolates, indicating an absence of cross-resistance between these two fungicides. Comparison of the sensitivities of P. capsici isolates showed a positive correlation between sensitivity to mandipropamid and dimethomorph ($r^2$=0.8533). The results of this study indicate that there is no evidence for development of resistance to mandipropamid in this population of P. capsici isolates collected in Korea.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.76-87
• /
• 2017

Finite-set predictive current control (FS-PCC) is advantageous for power converters due to its high dynamic performance and has received increasing interest in multilevel inverters. Among multilevel inverter topologies, the cascaded H-bridge (CHB) inverter is popular and mature in the industry. However, a main drawback of FS-PCC is its large computational burden, especially for the application of CHB inverters. In this paper, an FS-PCC method based on a deadbeat solution for three-phase zero-common-mode-voltage CHB inverters is proposed. In the proposed method, an inverse model of the load is utilized to calculate the reference voltage based on the reference current. In addition, a cost function is directly expressed in the terms of the voltage errors. An optimal control actuation is selected by minimizing the cost function. In the proposed method, only three instead of all of the control actuations are used for the calculations in one sampling period. This leads to a significant reduction in computations. The proposed method is tested on a three-phase 5-level CHB inverter. Simulation and experimental results show a very similar and comparable control performance from the proposed method compared with the traditional FS-PCC method which evaluates the cost function for all of the control actuations.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.2
• /
• pp.28-36
• /
• 2011

Risk management is popularly and widely used in various industries to handle uncertainty that can negatively affect their businesses. While in the current Information-Technology oriented age, software packages are designed to assist in carrying out risk management processes, the construction industry does not seem to have software that is tuned to its specific characteristics and processes. Therefore, this study first explores the types of software that are commonly used for risk management in the Singapore construction industry. Also, using one-sample t-test, it is tested if the software programs used in the construction industry have effectively catered the needs of the users. For the analysis, a survey questionnaire was developed and the representatives from 34 companies participated in the survey. Furthermore, this study also makes use of the current risk management framework defined in ISO31000 to design a risk management software algorithm that can suit the needs for the Singapore construction industry. The results from this study will contribute to identifying strategic areas, in terms of use of risk management software, on which the industry needs to focus, ultimately enhancing their performance of risk management.