• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.350-357
• /
• 2006

In this paper, a PSPICE model of piezoelectric transformer and CCFL using an electrical equivalent circuit was presented. The parameters of CCFL for PSPICE were derived by the least square method. The computer simulations were performed and the results are compared on the PSIPCE model of piezoelectric transformer driven by push-pull inverter and CCFL.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.180-191
• /
• 2003

In this paper, the modelings of PSPICE of the piezoelectric transformer and CCFL drive circuit using an electrical equivalent circuit is proposed. In the CCFL drive circuit modeling the model parameters of the CCFL were derived using the method of least squares because push-pull inverter and loads such as CCFL were also modeled using PSPICE. It is considered that the simulation techniques can be used in the piezoelectric devices such as piezoelectric transformer.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.573-574
• /
• 2011

본 논문에서는 DC-DC 컨버터의 설계 및 해석 방법을 PSpice와 Simulink를 이용한 Co-Simulation방법으로 제안하였다. 일반적인 회로 및 제어기 설계방식은 회로와 제어기를 각각 설계하여 시제품으로 측정하는 방법과 이상적인 모델을 이용하여 시뮬레이션 하는 방법을 사용한다. 본 논문에서는 상용 소자모델로 구성된 컨버터를 PSpice로 설계하였고, Simulink에서 PSpice Solver를 이용하여 시뮬레이션 함으로써 일반적인 설계 방식보다 높은 신뢰성을 가진 시뮬레이션 방법을 제안한다.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.35-39
• /
• 2011

The PSPICE equivalent circuit elements of a 1550 nm InGaAsP laser diode were derived by using multi-level rate equations. The device parameters were extracted by using a self-consistent numerical method for the optical gain properties of the MQW active regions. The resulting equivalent circuit model is also applied to an actual optical transmitter, and its PSPICE simulation results show good agreement with the measured results once the parasitic capacitance due to the packaging is taken into account.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.45-46
• /
• 2017

The operating characteristics of power MOSFETs greatly vary depending on the junction temperature. A PSpice thermal model is implemented to simulate the temperature characteristics of the power MOSFETs in this paper. A thermal model is derived that can be applied online in PSpice simulations and PSpice parameters are reconstructed using a curve fitting from commercial data sheets. The implemented PSpice model is applied to the buck converter and the validity of the model is verified through experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.757-765
• /
• 2007

Enhanced PSPICE circuit model for vented-box loudspeaker system with lumped parameters was proposed to more accurately simulate real vented-box loudspeaker system. Frequency dependent parameters were used to model voice coil inductor. Acoustic pressure response curves and electrical impedance curves were simulated and investigated by PSPICE circuit model according to circuit parameters' variations. Finally, it was used to identify faults detection in woofers manufactured by unskilled persons.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.150-158
• /
• 1999

The process of designing protective circuits against damage by transient overvoltages requires much work and expensive equipment. However computer simulation using PSpice can overcome these problems. In this paper a gas tube and a ZnO varistor Pspice-model considering the steepness of the wave-front were presented. The effects of various waveforms on the transient behaviors and firing volt-ages of a gas tube were modeled by controlled voltage source E controlled current source G and TABLE function of PSpice. And the nonlinear characteristics of a ZnO varistor were modeled by controlled voltage source E and H. To estimate the characteristics of the models proposed various waveforms specified in IEC Std. 1000310-4-5 were used in the simulation and the actual tests. The simulation results were compared with test results and showed good agreement.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.408-409
• /
• 2011

본 논문에서는 전력전자 시스템 해석 시 PSpice와 Simulink를 이용한 Co-Simulation방법으로 회로 레벨(Circuit level)을 포함한 시스템 레벨(System level)에서의 시뮬레이션 해석 방법을 제안한다. 일반적인 전력전자 시스템의 설계 방법은 회로 레벨과 시스템 레벨에서 별도로 시뮬레이션하거나 이상적인 모델을 이용하여 시스템을 해석하여 왔으나, 이러한 시스템 설계 방법은 별도의 시제품을 제작하여 측정함으로써 시간과 금전적 손실이 있었다. 이러한 점을 보완하기 위해서 PSpice와 Simulink를 이용한 Co-Simulation방법을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.360-361
• /
• 2013

본 논문에서는 Power Integration사의 플라이백 컨버터 제어 IC인 TOP258YN의 주요 기능을 PSPICE로 구현 및 검증하였다. PSPICE를 이용한 IC 모델링을 통하여 제한적으로 제공되던 IC의 모델링을 시뮬레이션이 가능하도록 하였다. 모델링를 이용하여 실시한 시뮬레이션과 회로 실험 비교를 통하여 본 논문을 검증한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.189-193
• /
• 2005

본 논문에서는 수동소자와 능동소자를 이용한 형광램프용 전자식 안정기의 보호회로를 PSpice 시뮬레이션을 사용하여 설계 제작하여 32W형광램프용 전자식 안정기에 적용하였다.