• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1624-1626
• /
• 2004

This study was to measure the minuteness structure, piezoelectric properties of (0.3-x)PMN- xPSS -0.7PZT+0.5[wt%]NiO+0.5(wt%)$MnO_2$ (x=0.05, 0.10, 0.15, 0.20, 0.25)ceramics according to sintering temp- erature and PSS(mol%) after manufacturing the specimens with a general method. the results of this study were gotten such as follows. The crystal structure of ceramic has the rombohedral structure in XRD. It appeared that addition of Ni, Mn additive was helpful to the formation of stable structure. The electrome- chanical coupling coefficient(kp) showed good properites on the whole, showed its maximum value 25.94[%] in specimens sintered at 1100[$^{\circ}C$], x=0.25mol. The mechanical quality coefficient(Qm) showed its maximum value 272.42 in specimens sintered at 1150[$^{\circ}C$], x=0.05mol. and was decreased by increasing PSS[mol%] The temperature coefficient of the resonant frequency(TCFr) showed stable properties in all sintering temperature with x=0.05mol. Especially good stability of 0.0054[%/$^{\circ}C$] showed in specimens sintered at 1100$^{\circ}C$, x=0.05mol.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.863-870
• /
• 1996

Fabricated modified PZT system for pyroelectric IR sensor were analyzed and characterized for dielectric piezoelectric and pyroelectric properties. Particle size and distribution of source powders were controlled by attrition milling process. 0.05PSS+yPT+(0.95-y)PZ+0.4 wt%MnO2 system was fabricated and investigated sintering density crystal structure and micro-structure through sintering conditions sintering temperature and sintering atmosphere. The poled sintered system of y=0.11 showed the lowest dielectric constant. The dielectric constants were increased with increasing y-mole ratio. The pyroelectric properties of modified PZT systems which were assembled to TO-5 package were measured by IR measurement system average out-voltage of 0.05PSS+0.1PT+0.84PZ+ wt%MnO2 was 3V.

• 한국화재소방학회논문지
• /
• 제9권2호
• /
• pp.29-36
• /
• 1995

In this study, the effect of Mn $O_2$ additive on the electrical characteristics of PZN-PSS-PZT Pyroelectric materials for the fire detactor was studies. PZT ceramics used this experimental is 4 composite system $[$Pb(Z $n_{1}$3/ N $b_{2}$3/) $O_3$＋Pb(S $n_{1}$3/ S $b_{2}$3/) $O_3$＋PbTi $O_3$＋PbZr $O_3$$]$The dielectric constants and dissipation factors decreases as to Mn $O_2$ concentration increases. At the Mn $O_2$ 0.5($\omega$t%), Pyroelectric coefficient shows 8(10$^{-8C}$$\textrm{cm}^2$$^{\circ}C$) which have the highst value among other additive contents. It is found that output voltage shows maximum peck at Mn $O_2$0.7($\omega$t％) is associated with the higher pyroelectric coefficient and Lowered dielectric constant.t.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.764-767
• /
• 2004

This study was to measure the minuteness structure, dielectric properties of (0.3-x)PMN - XPSS-0.7PZT+0.5wt%NiO+0.5wt%$MnO_2$(x=0.05, 0.10, 0.15, 0.20, 0.25)ceramics according to sintering temperature and PSS moi percentage after manufacturing the specimens with a general method. the results of this study were gotten such as follows. The crystal structure of ceramic has the rombohedral structure in XRD. it appeared that addition of Ni, Mn additive was helpful to the formation of stable structure. Dielectric constant at $20^{\circ}C$ showed its maximum value 890.001 in specimens sintered at $1000^{\circ}C$, x=0.15mol. and dielectric loss showed its minimum value 6.95[%] in specimens sintered at $1000^{\circ}$, x=0.05mol. The variation rate of dielectric constant according to the change of frequency was decreased by increasing frequency, The variation rate of dielectric constant according to the change of temperature was increased by increasing temperature.

• 대한전기학회논문지
• /
• 제41권5호
• /
• pp.502-507
• /
• 1992

To improve temperature stability, 0.05Pb(SnS11/2TSbS11/2T)OS13T-0.35PbTiOS13T-0.60PbZrOS13T+0.4[wt%]MnO S12T piezoelectic ceramics were manufactured with the addition of CrS12TOS13T by Hot Press method. And the SAW delay line was fabricated and effects of CrS12TOS13T to the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 specimen added by 0.2[wt%] CrS12TOS13T whose propagation characteriatics of surface acoustic wave were the bast and its frequency characteristics was investigated. Electromechancal coupling factor(kS1sTS02T) was 3.11[%] and its temperature coefficient of the center frequency(CS1foT)was -21.27[ppm/$^{\circ}C$] in C4. The 31[MHz]]SAW IF filter of C4 scarcely had diffraction phenomena and therefore it was proper.

• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.687-693
• /
• 1992

To improve dielectric, piezoelectric and temperature stability in 0.50Pb(SnS11/2TSbS11/2T)OS13T - 0.35PbTiOS13T - 0.60PbZrOS13T + 0.4[wt%]MnOS12T piezoelectric ceramics which is used for surface acoustic wave devices, CrS12TOS13T was added and the specimens were fabricated by Hot Press method, and their characteristics were measured with CrS12TOS13T addition. From the results, in the specimen added by 0.2[wt%]CrS12TOS13T, dielectric constant and mechanical quality factor were 380 and 2307, respectively, and it was suited for surface acoustic wave device and the temperature coefficient of the resonant frequency in the specimen added by 0.4[wt%]CrS12TOS13T was the least value of 74.96[ppm/$^{\circ}C$].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 1991

In this study, to improve temperature stability 0.05 Pb(Sn$\_$$\frac{1}{2}$/Sb$\_$$\frac{1}{2}$/O$_3$ - 0.35PbTiO$_3$ - 0.60PbZrO$_3$ + 0.4[wt%]MnO$_2$ piezoelctric oeramics of low dielectric constant and large mechanical quality factor were manufactured with the addition of Cr$_2$O$_3$by Hot Press method. And the SAW delay line was fabricated and the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 added by 0.2[wt%] Cr$_2$O$_3$and its frequency characteristics was investigated. The specimen, whose propagation characteristics of surface acoustic wave were the best, was C4 added by 0.2[wt%] Cr$_2$O$_3$, and its electromechanical coupling factor(ks$^2$) was 3.11[%] and its temperature coefficient of the center frequency (C$\_$fo/) was -21.27[ppm/$^{\circ}C$]. The 31[MHz] SAW IF filter of C4 scarcely had diffraction phenomena and its group delay time was 1.4673 ${\pm}$40[ns] in the pass band, and the insertion loss was -24.419[dB] on no impedance matching.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.746-748
• /
• 2002

The effect of $MnO_2$ addition in $0.05Pb(Sn_{0.5}Sb_{0.5})O_3-0.8PbZrO_3-0.15PbTiO_3$(0.05PSS-0.8PZ-0.15PT) ceramics on crystal structure and electrical properties were studied. The sintering temperature and time were $1230^{\circ}C{\sim}1270^{\circ}C$ and 2hr, respectively. Then crystal structure, dielectric and pyroelectric properties were investigated. All the poled specimens showed the lower dielectric constant and $tan{\delta}$ than the unpoled specimens. Dielectric constant at 1kHz of the 0.05PSS-0.8PZ-0.15PT(MnO2 0.3wt%) system specimen sintered at $1250^{\circ}C$ for 2hr were 270 and showed the lowest $tan{\delta}$ of 0.2% after poling of $2kV_{DC}/mm$ at $150^{\circ}C$ for 30 minutes. Pyroelectric coefficient was maximum value of $50nC/cm^2K$ and Curie temperature was $224^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권2호
• /
• pp.109-114
• /
• 1993

본 논문에서는 0.05Pb(Sn$_{1}$2/Sb$_{1}$2/)-0.35PbTiO$_{3}$-0.60PbZrO $_{3}$+0.4[wt%] MnO$_{2}$ 조성을 갖는 3성분계 압전세라믹스에 Cr$_{2}$O$_{3}$ 의 첨가량을 변화시켜서 지연선을 제작하고 탄성표면파를 여기시켜 전파속도를 측정하였으며 EMMAS 기준에 따라 각 시편의 재료정수를 측정하고 이를 압전방정식에 적용하여 매질에 따라 여기되는 탄성표면파의 계산속도를 이론적으로 산출한 후 이를 지연선에서 측정된 실험속도와 비교하여 재료의 특성이 탄성표면파의 전파특성에 미치는 영향을 조사하였다. 그 결과 SAW 지연선에서 측정된 탄성표면파는 Generalized Rayleigh Wave였으며 재료의 특성이 우수한 시편일 수록 계산속도와 측정속도와의 차가 적었던 것으로 나타났고 오차한도는 평균 99.39[%]였으므로 실험속도 측정방법이 feed through 현상없이 우수한 측정방법이었음을 알 수 있었다.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.418-427
• /
• 1997

$La_2O_3$가 각각 0, 0.1, 0.3, 0.5, 0.7, 1, 3, 5 mole% 첨가된 $0.05pb(Sn_{0.5}Sb_{0.5})O_3＋0.11PbTiO_30.84PbZroO_3＋0.4Wt%MnO_2$ (이하 0.05PSS -0.11PT-0.84PZ+0.4wt%$MnO_2$)계를, $1250^{\circ}C$에서 $PbZrO_3$를 분위기 분말로 사용하여 성형체 무게의 1/2을 함께 넣고 소결체를 제조하여 그 특성을 분석하였다. 소결체의 밀도는 7.683 g/$\textrm {cm}^3$에서 7.515 g/$\textrm {cm}^3$ 범위였으며, 3 mole% $La_2O_3$를 첨가한 경우 가장 높은 값을 나타내었다. 0에서 5 mole% 범위에서 $La_2O_3$ 첨가량을 증가시킬 때 평균 입경이 9.0 $\mu \textrm{m}$에서 1.3 $\mu\textrm{m}$까지 감소되었다. 결정구조의 경우 $La_2O_3$첨가량을 0에서 1 mole%로 할 때 0.05PSS-0.11 PT-0,84PZ계에서 고용된 상을 형성하였으나 3, 5 mole%로 첨가량을 증가시킴에 따라 제2차 산이 형성되었고, 소결체를 $120^{\circ}C$ 또는 $140^{\circ}C$에서 $5 KV_{DC}$ /mm로 20분간 poling 전후에 $La_2O_3$ 첨가량이 0 에서 3 mlole%까지 증가될수록 1KHz에서의 유전 상수는 증가되었으며, 유전손실은 모든 경우에서 1 % 미만의 값을 나타내었다. $La_2$O$_3$첨가량이 0, 0.5, 1, 3 mole%로 증가됨에 따라 큐리온도가 208$^{\circ}C$, 183$^{\circ}C$, $152^{\circ}C$ 그리고 $127^{\circ}C$로 감소되었다. $La_2O_3$가 증가됨에 따라 대체로 $K_{p}$ 증가되었으며 0.7 mlole%의 $La_2O_3$를 첨가한 소결체를 $140^{\circ}C$에서 poling한 경우 가장 높은 $K_p$값으로 14.5 %를 나타내었다.