• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.234-247
• /
• 2011

Product-service system (PSS) is a novel type of business model integrating products and services in a single system. It provides a strategic alternative to product-oriented economic growth and price-based competition in the global market. This paper first reviews the current status of PSS, including its concept, characteristics, benefits, and cases. This paper then reviews the existing literature and identifies major research issues for three main phases of a PSS development lifecycle, namely, PSS design, PSS evaluation, and PSS operation. This research is expected to contribute to promoting awareness and improving understanding of PSS in our society and planning of future research in this field.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.230-236
• /
• 2009

Double-front construction machinery, which was designed for complicated tasks, requires intelligent systems that can provide the quantitative work analysis needed to determine effective work procedures and that can provide operational and cognitive support for operators. Construction work environments are extremely complicated, however, and this makes state identification difficult. We therefore defined primitive static states (PSS) that are determined using on-off data for the lever inputs and manipulator loads for each part of the grapple and front and that are completely independent of the various environmental conditions and operator skill levels. To confirm the usefulness of PSS, we performed experiments with a demolition task by using our virtual reality simulator. We confirmed that PSS could robustly and accurately identify the work states and that untrained skills could be easily inferred from the PSS-based work analysis. We also confirmed in skill-training experiments that advice information using PSS-based skill analysis greatly improved work performance. We thus confirmed that PSS can adequately identify work states and are useful for work analysis and skill improvement.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.362-370
• /
• 2002

This paper describes the practical tuning method of dual-input PSS and its application to Muju P/P #2 with Proto PSS, which is based on DSP technology and uses both frequency and power. First, the model parameters of generator system used in this paper have been derived from the generator characteristic testing. Then, in the selection of PSS parameters, the Bode plot is plotted in order to tune the PSS's time constants which are able to compensate the phase lagging due to generator and excitation system. In addition, the eigenvalue analysis is also performed for determining a reliable PSS gain, $K_{s}$. Finally, the transient stability program has been utilized to verify the safe operation of Proto PSS against the predictable disturbances such as the AVR-step test and generator unloading test. In on-site test, the simulated results have been identically duplicated by implementing AVR step test in Muju P/P #2 with Proto PSS, which has the previously designed PSS parameters.s.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2183-2189
• /
• 2011

Since main portion of the required electric power in Jeju Island is provided from the mainland through two HVDC lines, Jeju HVDC has a most significant impact on Jeju power system. Average wind speed of Jeju Island is the highest among several candidates in South Korea. So, Jeju Island has been a suitable site for the construction of wind farms where several wind farms are now operating and several others to be sited. Since the large-scale wind generation could have adverse impacts on the stable operation of Jeju power system, wind power is also important for the stability of Jeju power system. Therefore, accurate modeling of Jeju HVDC and wind farms is required for stability analysis of Jeju power system. In this paper, PSS/E-based dynamic modeling of Jeju HVDC and DFIG wind farms is proposed. Model-writing technique of PSS/E is used to develop USRAUX model and USRMDL model for controlling the frequency of HVDC and imposing an operation limit of wind power, respectively. Dynamic characteristics of Jeju HVDC and DFIG wind farms are analyzed through the dynamic simulations. The simulation results show the effectiveness of the developed models for Jeju power system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.412-421
• /
• 2022

All 5G NR devices must first perform the cell search and synchronization process to communicate with the base station. In this process, PSS detection is one of the most important and difficult problems in 5G NR communication because PSS detection must first be successful in order to extract essential information from the following signals. Among the various PSS detection methods, this paper describes a cross-correlation-based detection method, and the implementation methods of the tap delay line hardware with parallelization are introduced and compared in terms of complexity and detection speed. In addition, the interface required for system configuration including the PSS detector and control software for efficient and flexible operation are also explained. In this paper, the resource usages of Xilinx's UltraScale+ FPGA are compared for various PSS detector structures and analyzed according to various parallelization levels.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.227-229
• /
• 2003

In this paper, we design a Power System Stabilizer for a Thyristor Controlled Series Capacitor(TCSC-PSS) for enhancement of power system stability. Here, PSS parameters are optimized using Genetic Algorithm(GA) in order to maintain optimal operation of TCSC. Simulation results show that the proposed control technique is superior to a conventional PSS in dynamic responses over the wide range of operating conditions and is convinced robustness and reliableness in view of structure.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.95-98
• /
• 1996

Response speed of generator/control system kas increased with the aid of the development of power electronics. Even though it is desirable to enhance response speed for the control system(AVR/Gov) of generator itself, in case a certain generator/control system with high response excitation system is connected with bulk power system, terminal voltage and active power of some generators can oscillate with adjoining generators or near area when even a little of disturbance take place. PSS(Power System Stabilizer) is used to damp rotor swing by adding the supplementary signal in phase with speed. As the stable AVR response is very important before PSS is installed, modeling and analysis of generator/control system was performed. Next we have analysed PSS response of Hanlim's gas turbine by transmission line open/close test.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.7
• /
• pp.323-327
• /
• 2005

This paper presents an operator training simulator for power system restoration against massive black-out. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using power flow calculation methodology, and PSS/E data is used to define the initial situation. The proposed simulator consists of three major components - the power flow(PF) module, data conversion(COW) module and GU subsystem. PF module calculates power flow, and then checks overvoltage of buses and overflow of lines. COW module composes an Y-Bus array and a data base at each restoration action. The initial Y-Bus array is constructed from PSS/E data. The user friendly GUI subsystem is developed including graphic editor and built-in operation manual. As a result, the maximum processing time for one step operation is 15 seconds, which is adequate for training purpose. Comparison with PSS/E simulation proves the accuracy and reliability of the training system.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.181-183
• /
• 2003

This paper presents an operator training simulator for power system restoration against massive black-out. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using on line calculation methodology, and PSS/E data is used to define the initial situation. The proposed simulator consists of three major components - the Power flow(PF) module, data conversion(CONV) module and CUI subsystem. PF module calculates power flow, and then checks overvoltage of buses and overflow of lines. CONV module composes an Y-Bus array and a data base at each restoration action. The initial Y-Bus array is constructed from PSS/E data. The user friendly GUI module is developed including graphic editor and built-in operation manual. As a result, the maximum processing time for one step operation is 15 seconds, which is adequate for training purpose. Comparison with PSS/E simulation proves the accuracy and reliability of the training system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.10
• /
• pp.479-485
• /
• 2000

This paper presents a analysis method for dynamic characteristics of power system using a Genetic-based Power System Stabilizer(PSS). The proposed PSS parameters are optimized using Genetic Algorithm(GA) in order to maintain optimal operation of generator under the various operating conditions. To decrease the computational time, real variable string is adopted. The results tested on a single machined infinite bus system verify that the proposed controller has better dynamic performance than conventional controller.