• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.358-362
• /
• 1991

This paper describes enhancements made on PROSET, an, expert system which can perform setting and coordination of protective relays used in the ultra-high voltage transmission systems. Enhancements include the friendly and convenient environment for rulebase management and system manipulation, expanded setting capability, and faster processing speed which have been achieved through adoption of the new rule representation, rule order independent IE, rulebase editor, local database generator, Interface to PSS/E fault program, RB expansion etc.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.406-410
• /
• 1991

This paper presents an improved algorithm of optimal measurement system design with a reliability evaluation method for large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited Investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurement values are exactly zero. Thus, the effect on these dummy bus measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.226-227
• /
• 2011

본 논문에서는 전력 시스템의 저주파 진동을 효율적으로 억제하기 위하여 기존의 PSS 를 이용하는 방법 대신 FESS를 적용하는 방법을 제시하였다. FESS PID 제어기의 최적 파라미터를 선정하기 위하여 GA를 이용한 방법을 제시하였다. 최적화 파라미터 선정시 사용되는 평가함수를 2가지로 선정하여 선정된 파라미터를 이용하여 FESS PID 제어성능을 평가하였다. 다양한 동작 조건하에 몇 가지 외란이 발생한 경우 비선형 시뮬레이션을 통하여 기존의 PSS를 이용한 방법과 동특성을 비교 고찰하였다.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.193-201
• /
• 1998

In this paper, the standard Dole, Glover, Khargoneker, and Francis (abbr. : DGKF 1989) H\ulcorner controller (H\ulcornerC) is extended to the nonlinear feedback linearization-H\ulcorner/sliding mode controller (NFL-H\ulcorner/SMC), to tackle the problem of the unmeasurable state variables as in the conventional SMC, to obtain smooth control as the linearized controller in a linear system, and to improve the time-domain performance under a worst scenario. The proposed controller is obtained by combining the H\ulcorner estimator with the nonlinear feedback linearization-sliding mode controller (NFL-SMC) and it does not need to measure all the state variables as in the traditional SMC. The proposed controller is applied as a nonlinear power system stabilizer (PSS) for the improvement of the power system damping characteristics of an single machine infinite bus system (SMIBS) connected through a double circuit line. The effectiveness of the proposed controller is verified by nonlinear time-domain simulation in case of a 3-cycle line-to-ground fault and in case of the parameter variations for the AVR gain K\ulcorner and for the inertia moment M.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.107-117
• /
• 1992

This paper presents an improved algorithm of optimal measurement design with a reliability evaluation method for a large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.91-95
• /
• 2011

The light extraction efficiency in GaN based LED was analyzed qualitatively. The extraction efficiency was simulated with patterned shape, depth, size and spacing by using ray-tracing simulation. In simulation result, patterned shape and depth for the optimized extraction efficiency in PSS LED were in indented Hemi-sphere solid. Through the optimal patterning of the various factors, about 40% enhancement in extraction efficiency was obtained.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.93-95
• /
• 2002

This paper presents the design of a Unified Power Flow Controller(UPFC) for enhancing the small signal voltage stability in the multi-machine power systems. Recently a lot of attention has been paid to the subject of dynamic stability. The paper deals with analysis of eigenvalue sensitivities with respect to parameters of UPFC Controller. The series branch of the UPFC is designed to damp the power oscillation during transients, while the shunt branch aims at maintaining the bus voltage. Comprehensive time-domain simulation studies using Pss/E show that the proposed robost UPFC controller can enhance the small signal stability efficiently in spite of the variations of power system operating conditions.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.83-85
• /
• 1995

A technique for power system' stabilization is presented using the variable structure control theory. The selection problem of the proper switching vector is very important subject for a design of the variable structure controller. In this paper, the switching vector is selected by desired eigenvalues allocation. and these desired eigenvalues are determined by eigenvalue assignment. Simulation results show that eigenvalue allocation variable structure stabilizer yields better dynamic performance than the others (conventional PSS, optimal linear stabilizer) and is robust to wide variations of the system parameters.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.311-318
• /
• 2011

Small-scale reactors have recently attracted attention as a potential power generation source for the future. The Regional Energy Research Institute for Next Generation is currently developing a small-scale reactor called Regional Energy rX 10 MVA (REX-10). The current paper deals with a power system to be used with small-scale reactors for multi-purpose regional energy systems. This small nuclear system can supply electric and thermal energy like a co-generation system. The electrical model of the REX-10 has been developed as a part of the SCADA system. REX-10's dynamic and electromagnetic performance on the power system is analyzed. Simulations are carried out on a test system based on Ulleung Island's power system to validate REX-10 availability on a power system. RSCAD/RTDS and PSS/E software tools are used for the simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.158-163
• /
• 1997

In this paper the tool geometry of the PSS test were optimized in order to assure the reliability of the test. Considering many factors for optimization of the tool geometry, computer-simulation technique using three-dimensional finite element method(FEM) was used. Three design variables -the punch length, punch crown and punch corner radius- are chosen to be optimized according to the Taguchi's experiment technique with the L9 orthogonal array. The optimum condition to ensure the plane strain mode over the overall area of the specimen was clarified. Moreover the simulation results are confirmed by experiment.