• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.393-396
• /
• 2001

산업분야에서 많이 사용되고 있는 컴퓨터나 자동화 제조공정 둥은 전압저하나 이상전압에 민감하게 반응한다. 전력품질의 문제가 증가함에 따라 수용가 측에서는 무정전 전원장치(UPS)와 같은 일정전압을 유지할 수 있는 전압조절장치 들을 사용하고 있다. 본 논문에서는 전압조절기 응용을 위한 PWM Buck-Boost AC/AC 컨버터가 제안된다. 제안된 컨버터는 IGBT 스위칭 모듈을 사용하고 입력전압의 저하나 증가시, 그리고 부하의 변동시에 PWM 제어에 의하여 일정한 전압을 유지할 수 있다. 본 논문에서는 제안된 PWM Buck-Boost AC/AC 컨버터의 회로구성과 특징을 설명하고 이를 PSPICE 시뮬레이션을 통하여 동작특성을 보인다.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.285-288
• /
• 2007

PDP(Plasma Display Panel) driving circuit requires switching devices and capacitors to stand up high voltages over 150volts. Thereby the power consumption and the cost of a PDP driving circuit increase. In this paper, a PDP driving circuit is proposed that can be operated with a lower supply voltage than the supply voltage of conventional driving circuit. The operation of the proposed driving circuit is verified by the computer simulation and experiments. PSPICE simulation and experiments results show that the output signal can drive PDP cells when the supply voltage is higher than 40volts.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.166-169
• /
• 1998

This paper represent about design of the controller for battery of fence with traffic controller for battery of fence with traffic auxiliary system for power supply using solar cell. Simulation is represents V-I and power characteristic by Pspice. This system is successfully operating with high clearness lights.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.45-47
• /
• 2018

This paper describes the 40kV solid state pulsed power supply for environmental applications. The output specifications of the pulsed power supply are 40kV, 300A, 3kHz, and average output power of 13kW. In order to generate a high voltage, a series stacking cell structure is used which is charged in parallel and discharged in series. Due to this structure, there is no dynamic voltage balancing problem as well as static voltage balancing problem for switches used in high voltage pulse power supplies. To verify this pulse power supply design, PSpice modeling was performed. Finally, experimental results with non-inductive resistive load and gas treatment reactor proved the reliability of the solid state pulsed power supply.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1212-1214
• /
• 2000

A new soft-switching PFC-Inverter for Induction Motor's operation with single phase or three phase medium size is proposed. In order to improve the power factor and the efficiency, in this paper, the ZVT topology in the conventional PFC-Inverter is adopted. So, the operation mode of the proposed ZVT PFC-inverter is analyzed and the optimum circuit is designed. At last, the PSPICE simulation and experiment results are presented in order to verify the validity of the proposed circuit.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3145-3147
• /
• 2000

A passive RFID system consists of reader and tag. Reader is required the filter to modulate the data from backscattering signal which is transmitted by tag. The filter in the reader consists of envelope detector, amplifier, filter, and pulse shaping circuit, In this paper, design and analysis of filter in the RFID system which is operated at l3.56MHz carrier and 70KHz backscattering signal frequency is presented and is confirmed by simulation using Pspice.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3081-3083
• /
• 2000

Fuel cell/battery hybrid power systems were studied to develop high efficient zero-emission fuel cell electric vehicles, Fuel cells were used as an auxiliary energy source and batteries were used as a transient power source. The fuel cell system is used to supply the average power demand. Dynamic response of the hybrid systems was simulated using PSPICE program and also tested experimentally, The results can be used to design the interface module and to determine the power requirement between the fuel cell unit and the battery pack.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1300-1302
• /
• 2000

In the charge system, a contact type-convenient-charging method is insufficient because of the contact failure around moist environment and troublesome question to put in and pull out. For the solution of this problem, an electromagnetically coupled non-contact charger for the rechargeable cell is proposed using ZVS multi-resonant forward converter. In this paper magnetizing inductance, leakage inductance and coupling coefficient, k are observed. By using the obserbed value, the proposed circuit is simulated by the PSPICE and implemented and the peak voltage of switch and output power are measured.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1306-1308
• /
• 2000

A new ZVT PFC for using 3[KW] power amplifier is proposed. Generally, the single phase diode rectifier has been widely used in the SMPS of the conventional power amplifier. But this rectifier has occurred some problems which are the input power factor and current harmonics. To solve the above problems, in this paper, two topology is adopted. The one is the boost type PFC for improving the input power factor. The other is the ZVT resonant circuit for reducing the switching loss and stress. In this paper, the proposed topology is analyze designed to built the ZVT PFC for using 3[KW] power amplifier. In order to verify the circuit va finally, the PSPICE simulation and experiment results are presented.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.401-404
• /
• 2006

A new log-domain first-order multifunction filter is proposed in this letter. The proposed filter is systematically derived using the state-space synthesis procedure from a corresponding block diagram. It provides low-pass (LP), high-pass (HP), and all-pass (AP) responses simultaneously for a single input signal. The filter circuit has a very simple structure since it uses only bipolar junction transistors (BJTs) and a grounded capacitor. It can be electronically tuned by changing an external current. The filter has a greater bandwidth due to its inherent current-mode and log-domain operations. PSPICE simulations are given to confirm the theoretical analysis.