• Computers and Concrete
• /
• 제9권3호
• /
• pp.179-193
• /
• 2012

The hydration of cement contributes to the performance characteristics of concrete, such as strength and durability. In order to improve the utilization efficiency of cement and its early properties, the particle size distribution (PSD) of cement varies considerably, and the effects of the particle size distribution of cement on the hydration process should be considered. In order to evaluate effects of PSD separately, experiments testing the isothermal heat generated during the hydration of cements with different particle size distributions but the same chemical composition have been carried out. The measurable hydration depth for cement hydration was proposed and deduced based on the experimental results, and a PSD hydration model was developed in this paper for simulating the effects of particle size distribution on the hydration process of cement. First, a reference hydration rate was derived from the isothermal heat generated by the hydration of ordinary Portland cement. Then, the model was extended to take into account the effect of water-to-cement ratio, hereinafter which was referred to as PSD hydration model. Finally, the PSD hydration model was applied to simulate experiments measuring the isothermal heat generated by the hydration of cement with different particle size distributions at different water-to-cement ratios. This showed that the PSD hydration model had simulated the effects of particle size distribution and water-to-cement ratio on the hydration process of cement with satisfactory accuracy.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1951-1962
• /
• 1993

The creation process of a typical machined surface is treated here as a dynamic system. An investigation is carried out to establish a relationship between the characteristics of cutting force fluctuations that cause vibration response of the tool-workpiece system and the formation of surface in face cutting by sintered carbide cutting tool. Cutting force is measured and analyzed in frequency domain. The power spectral densities of cutting force give a useful information in surface generation and it can be used to find out the control factor of surface roughness. The terms, PSD ratio & Normalized spindle frequency PSD, are defined and when the value of power in spindle frequency is absolutely little but relatively large, it is obtained high accuracy surface roughness. The aim of this research is to find surface profile by measured and analyzed cutting force signals. The simulation of surface generation gives the comprechension of its mechanism and help to predict and control the surface quality. In this study, it is suggested what informations about surface generation can be acquired from the cuttuing force signal and an way of generating a better surface.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.32-39
• /
• 2005

액체 연료 로켓의 연료 공급 라인을 모사 한 시스템에 대해, PSD가 시스템의 응답에 미치는 영향을 살펴보았다. 주관의 유량 변화에 대한 주관 압력 변화의 비(시스템 응답)를 PSD 내의 기체 체적$((0\~2)\times10^{-3}m^3)$과 PSD 배플의 직경(5, 50, 115 mm)을 변화시키며 살펴보았다. PSD 내에 기체가 있을 경우, 시스템의 고유진동 주파수가 작아짐을 확인하였다. 그리고 기체의 체적이 클수록 시스템 고유진동 주파수가 작아졌으나, 그 변화는 그리 크지 않았다. 또한 PSD 내 기체량이 많은 경우, 주관 내 압력 및 유량 변화의 진폭이 많이 감소함을 확인할 수 있었다. PSD 배플의 직경이 작아질수록 시스템 고유 진동 주파수가 작아졌으나 그 변화는 작았다. 또한 PSD 배플의 저항이 클 때, PSD 내 압력은 주관의 압력 크기보다 작고, 지연된 파형이 관찰되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.583-585
• /
• 2004

In this paper we will deal with a calibration method for low cost motion capture system using psd(position sensitive detection) optical sensor. To measure the incident direction of the light from LED emitted marker, the PSD is used the output current ratio on the electrode of PSD is proportional with the incident position of the light focused by lens. In order to defect the direction of the light, the current output is converted into digital voltage value by opamp circuits peak detector and AD converter with the digital value the incident position is measured. Unfortunately, due to the non-linearly problem of the circuit poor position accuracy is shown. To overcome such problems, we compensated the non-linearly by using least-square fitting method. After compensated the non-linearly in the circuit, the system showed more enhanced position accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2167-2169
• /
• 2004

The main concern for a displacement measurement is the performance of a sensor such as speed, resolution, accuracy and so on. The mainly used sensors are a linear CCD(charge coupled device) and a PSD(position sensitive detection) as a non-contact type. The output value of a linear CCD is so sensitive to a temperature change that it needs a cooling device. Additionally, because of its structural problem, there are some limits in resolution and speed, and it needs a complex image processing algorithm. Also, PSD has some disadvantages like sensitivity to environmental lights and nonlinearities. Like this, a linear CCD and PSD have their own characteristics and if we know them well, we can choose the one of the two sensors properly in some applications according to purposes. In this paper, I performed which one is superior to the other among the two sensors in terms of accuracy, resolution, measurement speed, signal to noise ratio.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.121-125
• /
• 2004

액체 연료 로켓의 연료 공급 라인을 모사한 시스템에 대해, PSD가 시스템의 응답에 미치는 영향을 살펴보았다. 주관의 유량 변화에 대한 주관 압력 변화의 비(시스템 응답)를 PSD 내의 기체 체적을 변화시키며 살펴보았다. PSD 내에 기체가 지을 경우, 시스템의 공진 주파수가 작아짐을 확인하였다. 그리고 기체의 체적이 클수록 시스템 공진 주파수가 작아졌으나, 그 변화는 그리 크지 않았다. 또한 PSD 내 기체량이 많은 경우, 주관 내 압력 및 유량 변화의 진폭이 많이 줄어듦을 확인할 수 있었다.

• 운동영양학회지
• /
• 제25권1호
• /
• pp.1-6
• /
• 2021

[Purpose] We determined the effect of partial sleep deprivation (PSD) after an exercise session on exercise performance on the following morning. [Methods] Eleven male athletes performed either a normal sleep trial (CON) or a PSD trial. On the first day (day 1), all subjects performed an exercise session consisting of 90 min of running (at 75% ${\dot{V}}O_{2max}$) followed by 100 drop jumps. Maximal strength (MVC) was evaluated before and after exercise. In the CON trial, the sleep duration was 23:00-7:00, while in the PSD trial, the sleep duration was shortened to 40% of the regular sleep duration. On the following morning (day 2), MVC, the metabolic responses during 20 min of running (at 75% ${\dot{V}}O_{2max}$), and time to exhaustion (TTE) at 85% ${\dot{V}}O_{2max}$ were evaluated. [Results] On day 2, neither the MVC nor ${\dot{V}}O_2$ during 20 min of running differed significantly between the two trials. However, the respiratory exchange ratio was significantly lower in the PSD trial than in the CON trial (p = 0.01). Moreover, the TTE was significantly shorter in the PSD trial than in the CON trial (p = 0.01). [Conclusion] A single night of PSD after an exercise session significantly decreased endurance performance without significantly changing muscle strength or cardiopulmonary response.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.34-43
• /
• 2007

As a method to improve the poor torque capacity on the continuously variable transmission(CVT), power splitted devices(PSD) reducing the power entering into the transmission has been considered. But this kind of PSD requires for the variator to be a large coverage of the speed ratio (CSR) Since the CSRs of the well-known push belt or the toroidal ones are not enough large, the power splitted CVTs (PSCVTs) using them should be made with multiple modes. inevitably adding the do9 clutches and the associated accessories. In this paper a PSCVT with single mode is conceptually designed A new continuously variable unit (CVU) consisting of the paired inner and outer spherical rotors is used. The CVU has large CSR and excellent compactness. As a PSD. a variable bridge (VB) using the Planetary gear units (PGUs) is considered because it has an upper bound on the power ratio. An optimal design to minimize the effective efficiency of the PSCVT is carried out. Through the performance analysis on the designed model, good expectation on the practicability in the heavy vehicle system is shown.

• 열처리공학회지
• /
• 제7권2호
• /
• pp.96-102
• /
• 1994

The present work was aimed to examine the changes of the shape and particle size distribution(PSD) of ${\delta}^{\prime}$ particles on ageing in Al-Li-(Cu, Zr) alloys which had low density, high specific strength and stiffness, Increasing ageing time and temperature resulted in particles whose aspect ratio tended toward 1. The aspect ratio of ${\delta}^{\prime}$ particles was not dependent upon the ageing temperature and time in Al-Li-Cu alloy but was dependent upon them in Al-Li-Zr alloy. The PSD of ${\delta}^{\prime}$ particles in Al-Li-Zr alloy skewed to the right hand compared with that in Al-Li-Cu alloy, because $Al_3Zr$ phase in Al-Li-Zr alloy formed before ageing promoted the precipitation and growth of ${\delta}^{\prime}$ phase. Therefore, the PSD of the ${\delta}^{\prime}$ particles was found to be affected by the presence of $Al_3Zr$ particles. The growth rate of ${\delta}^{\prime}$ phase was not affected by the existence of the third transition phase $T_1$ formed by the addition of Cu in Al-Li alloy but was affected by the existence of $Al_3Zr$ formed by the addition of Zr in Al-Li alloy.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2001년도 정기총회 및 학술대회
• /
• pp.71-76
• /
• 2001

OFDM(Orthogonal Frequency Division Multiplexing)의 단점인 높은 PAPR(Peak-to-Average Power Ratio)을 개선하기 위한 방법 중에서 SDT(Signal Distortion Technique)는 전송시스템의 규격 및 수신기의 변경 없이도 적용 가능한 이점이 있다. 본 논문에서는 SDT에 속하는 clipping과 peak windowing 기법을 Eureka 147 DAB(Digital Audio Broadcasting) 시스템에 적용하여 얻은 BER 및 PSD 성능결과를 토대로 PAPR 개선 정도에 따른 시스템의 요구 $Es/N_0$ 및 out-of-band의 PSD 열화 정도를 분석하였다. Hamming windowing을 적용한 경우, PAPR 4㏈에서 clipping에 비해 요구 $Es/N_0$는 비슷한 열화정도가 나타났으나, out-of-band의 PSD는 5dB 정도 개선되는 성능을 보였다.